Export limit exceeded: 200634 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (200634 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72416 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer. | ||||
| CVE-2025-38524 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recv-recv race of completed call If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale. | ||||
| CVE-2025-38246 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: properly flush XDP redirect lists We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456 ---truncated--- | ||||
| CVE-2025-38234 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sched/rt: Fix race in push_rt_task Overview ======== When a CPU chooses to call push_rt_task and picks a task to push to another CPU's runqueue then it will call find_lock_lowest_rq method which would take a double lock on both CPUs' runqueues. If one of the locks aren't readily available, it may lead to dropping the current runqueue lock and reacquiring both the locks at once. During this window it is possible that the task is already migrated and is running on some other CPU. These cases are already handled. However, if the task is migrated and has already been executed and another CPU is now trying to wake it up (ttwu) such that it is queued again on the runqeue (on_rq is 1) and also if the task was run by the same CPU, then the current checks will pass even though the task was migrated out and is no longer in the pushable tasks list. Crashes ======= This bug resulted in quite a few flavors of crashes triggering kernel panics with various crash signatures such as assert failures, page faults, null pointer dereferences, and queue corruption errors all coming from scheduler itself. Some of the crashes: -> kernel BUG at kernel/sched/rt.c:1616! BUG_ON(idx >= MAX_RT_PRIO) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? pick_next_task_rt+0x6e/0x1d0 ? do_error_trap+0x64/0xa0 ? pick_next_task_rt+0x6e/0x1d0 ? exc_invalid_op+0x4c/0x60 ? pick_next_task_rt+0x6e/0x1d0 ? asm_exc_invalid_op+0x12/0x20 ? pick_next_task_rt+0x6e/0x1d0 __schedule+0x5cb/0x790 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: kernel NULL pointer dereference, address: 00000000000000c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? __warn+0x8a/0xe0 ? exc_page_fault+0x3d6/0x520 ? asm_exc_page_fault+0x1e/0x30 ? pick_next_task_rt+0xb5/0x1d0 ? pick_next_task_rt+0x8c/0x1d0 __schedule+0x583/0x7e0 ? update_ts_time_stats+0x55/0x70 schedule_idle+0x1e/0x40 do_idle+0x15e/0x200 cpu_startup_entry+0x19/0x20 start_secondary+0x117/0x160 secondary_startup_64_no_verify+0xb0/0xbb -> BUG: unable to handle page fault for address: ffff9464daea5900 kernel BUG at kernel/sched/rt.c:1861! BUG_ON(rq->cpu != task_cpu(p)) -> kernel BUG at kernel/sched/rt.c:1055! BUG_ON(!rq->nr_running) Call Trace: ? __die_body+0x1a/0x60 ? die+0x2a/0x50 ? do_trap+0x85/0x100 ? dequeue_top_rt_rq+0xa2/0xb0 ? do_error_trap+0x64/0xa0 ? dequeue_top_rt_rq+0xa2/0xb0 ? exc_invalid_op+0x4c/0x60 ? dequeue_top_rt_rq+0xa2/0xb0 ? asm_exc_invalid_op+0x12/0x20 ? dequeue_top_rt_rq+0xa2/0xb0 dequeue_rt_entity+0x1f/0x70 dequeue_task_rt+0x2d/0x70 __schedule+0x1a8/0x7e0 ? blk_finish_plug+0x25/0x40 schedule+0x3c/0xb0 futex_wait_queue_me+0xb6/0x120 futex_wait+0xd9/0x240 do_futex+0x344/0xa90 ? get_mm_exe_file+0x30/0x60 ? audit_exe_compare+0x58/0x70 ? audit_filter_rules.constprop.26+0x65e/0x1220 __x64_sys_futex+0x148/0x1f0 do_syscall_64+0x30/0x80 entry_SYSCALL_64_after_hwframe+0x62/0xc7 -> BUG: unable to handle page fault for address: ffff8cf3608bc2c0 Call Trace: ? __die_body+0x1a/0x60 ? no_context+0x183/0x350 ? spurious_kernel_fault+0x171/0x1c0 ? exc_page_fault+0x3b6/0x520 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? asm_exc_page_fault+0x1e/0x30 ? _cond_resched+0x15/0x30 ? futex_wait_queue_me+0xc8/0x120 ? futex_wait+0xd9/0x240 ? try_to_wake_up+0x1b8/0x490 ? futex_wake+0x78/0x160 ? do_futex+0xcd/0xa90 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? plist_del+0x6a/0xd0 ? plist_check_list+0x15/0x40 ? plist_check_list+0x2e/0x40 ? dequeue_pushable_task+0x20/0x70 ? __schedule+0x382/0x7e0 ? asm_sysvec_reschedule_i ---truncated--- | ||||
| CVE-2025-38127 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix Tx scheduler error handling in XDP callback When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice] [...] [ +0.002715] Call Trace: [ +0.002452] <IRQ> [ +0.002021] ? __die_body.cold+0x19/0x29 [ +0.003922] ? die_addr+0x3c/0x60 [ +0.003319] ? exc_general_protection+0x17c/0x400 [ +0.004707] ? asm_exc_general_protection+0x26/0x30 [ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice] [ +0.004835] ice_napi_poll+0x665/0x680 [ice] [ +0.004320] __napi_poll+0x28/0x190 [ +0.003500] net_rx_action+0x198/0x360 [ +0.003752] ? update_rq_clock+0x39/0x220 [ +0.004013] handle_softirqs+0xf1/0x340 [ +0.003840] ? sched_clock_cpu+0xf/0x1f0 [ +0.003925] __irq_exit_rcu+0xc2/0xe0 [ +0.003665] common_interrupt+0x85/0xa0 [ +0.003839] </IRQ> [ +0.002098] <TASK> [ +0.002106] asm_common_interrupt+0x26/0x40 [ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690 Fix this by performing the missing unmapping of XDP queues from q_vectors and setting the XDP rings pointer back to NULL after all those queues are released. Also, add an immediate exit from the XDP callback in case of ring preparation failure. | ||||
| CVE-2025-22057 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too. | ||||
| CVE-2024-58096 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2026-98979 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: refuse an automount below a mount that is in no namespace It's possible to add autmounts even when the parent mount isn't in the mount namespace of the caller. The only requirement we have is that the parent mount namespace must not be NULL, i.e., unmounted. Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes that trivially true. So that passes the test and attach_recursive_mnt() accepts that as a mount point and funny enough, count_mounts() dereferences MNT_NS_INTERNAL. The problem is it is an error pointer... So we can reach this in userspace via fanotify. A filesystem mark on the lower filesystem of an overlay reports paths on the layer clone and reading the event hands out a descriptor on it. For example with debugfs as the lower layer it goes kaboom: openat(evfd, "tracing", O_DIRECTORY) Oops: general protection fault KASAN: null-ptr-deref in range [0x1d0-0x1d7] RIP: 0010:count_mounts+0x35/0x200 attach_recursive_mnt finish_automount And since that sleeping beauty happens under namespace_sem held for writing every mount operation on the system blocks from then on. Congrats. Use is_mounted() instead which rejects unmounted and internal mounts alike. The open fails with EINVAL just as it did before clone_private_mount() used MNT_NS_INTERNAL. | ||||
| CVE-2026-98977 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: namespace: handle mount locking for automounts correctly If mounts are propagated across user namespaces, attach_recursive_mnt() locks every copy of the source mount to protect overmounts from vanishing and revealing the underlying files or directories. The user namespace is taken from the caller's mount namespaces since this is where the mounts end up. Except, that's not always true. Automounts may legitimately get popped in by tasks located in a different mount and user namespace during path lookup. Then check doesn't make sense at that point. The copy in the namespace of the parent - which may be the host's - is now locked and the host cannot change the flags of its own mounts anymore. Here's the reproducer: - host has debugfs mounted nosuid,nodev,noexec and shared - tracefs automount below it is not yet active - hand a child process a directory descriptor on that mount - child process enters auser and mount namespace - child process' namespace now holds a locked copy of the host's debugfs mount that receives propagation from it - child process stats "tracing/." through the descriptor - lookup runs on the host's mount so the automount lands below the host's mount - propagation puts a copy below the child's copy - both try to clear the flags on the mount they got, with a bind remount: host, on its own automount: MS_REMOUNT|MS_BIND = EPERM child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0 So the lock landed on the host's mount instead of the child's copy. Congrats. So we need to compare with the owner of the namespace the mount actually gets mounted on. For all regular cases that is the caller's mount namespace and so nothing changes. Detached trees in anonymous mount namespaces by be handed over via SCM_RIGHTS or inherited in other ways on purpose so the attaching task's mount namespace is authoritative, not the creator of the detached tree. | ||||
| CVE-2026-98971 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: exar: initialize the ID before registering its cleanup devm_add_action_or_reset() invokes the cleanup action immediately when registering the action fails. gpio_exar_probe() currently stores the allocated ID in exar_gpio only after registering the action, so that failure makes exar_devm_ida_free() release ID 0. If the allocated ID is nonzero, this leaks that ID and can free ID 0 belonging to another device. Store the ID before registering the cleanup action so both the immediate failure path and normal device teardown release the correct allocation. | ||||
| CVE-2026-98970 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Free the BO cache size list on teardown vc4_bo_cache_destroy() purges the cached BOs but never frees the size list, leaking it on every unbind. | ||||
| CVE-2026-98969 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: em_text: reject unterminated algo before autoload This is a follow-up to commit 9c572a83037a ("net/sched: fix potential stack infoleak in em_text_dump()"), which zero-initialised the dump-side struct. Sashiko pointed at a pre-existing bug that exposed the change-side input-validation gap open. em_text_change() casts the raw netlink attribute payload to struct tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf() walks %s until it finds a NUL, so an algo[] with no NUL reads past the array into the adjacent struct fields and payload and feeds those bytes to the usermode helper command line. This is an out-of-bounds read and a kernel memory disclosure. Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes, matching the check xt_string has had since 3ab720881b6e. Conditions to recreate the bug: - CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn is enough) - install clsact on an interface, then add a basic filter with one text ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and pattern_len at least 1 - the add fails with -ENOENT and the kernel invokes modprobe with a module name made of "ts_" plus the 16 bytes and the adjacent payload | ||||
| CVE-2026-98955 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO frame carrying a 65522..65535 byte L3 packet will be dissected with skb->len in [65536, 65549]. Compare as u32 instead. If the resulting offset cannot be represented in the u16 key_control->thoff, cap it to U16_MAX and report the dissection as failed rather than silently returning a wrong transport offset. thoff is still set on failure, as some callers (such as eth_get_headlen()) use it regardless of the return value. | ||||
| CVE-2026-98935 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending') | ||||
| CVE-2026-98934 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431 seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681 seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744 lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356 dst_output include/net/dst.h:470 [inline] ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131 iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97 udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187 tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202 tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274 tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576 tipc_enable_bearer net/tipc/bearer.c:366 [inline] __tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048 tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057 genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 | ||||
| CVE-2026-98862 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait. | ||||
| CVE-2026-98857 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further. | ||||
| CVE-2026-98856 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump. | ||||
| CVE-2026-98855 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. | ||||
| CVE-2026-98851 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: drop flowtable reference on init error path nft_flow_offload_init() bumps the flowtable use count with nft_use_inc() before calling nf_ct_netns_get(). When the latter fails, the error is returned as-is and the reference is leaked. The upper layers do not balance it either: nf_tables_newexpr() clears expr->ops when the expression init callback fails, so the nft_expr_more() iteration in nft_rule_expr_deactivate() and nf_tables_rule_destroy() stops right before the failed expression and its ->destroy callback, which would drop the reference, never runs. Each failed rule addition therefore leaks one flowtable reference and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE keeps reporting -EBUSY even though no rule references it. Save the nf_ct_netns_get() return value and undo the nft_use_inc() when it fails, restoring the inc/dec pairing within nft_flow_offload_init() itself. | ||||