Export limit exceeded: 203657 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (203657 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-75083 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 5.9 Medium |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255. Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array. The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact. The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. | ||||
| CVE-2026-67693 | 1 Gnu | 1 Gnutls | 2026-11-04 | 3.7 Low |
| GnuTLS v3.8.13 does not reject end-entity X.509 certificates that contain a contradictory combination of Key Usage (KU) and Extended Key Usage (EKU). NOTE: the Supplier does not consider this an actionable security vulnerability because of its "threat model doesn't consider attacks only possible by modifying anything within the trust boundary (private keys, trusted certificate authorities and their issued certificates including intermediate CAs, etc.)" policy. | ||||
| CVE-2026-12632 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 6.5 Medium |
| Zephyr's Precision Time Protocol receive handler ptp_msg_post_recv() in subsys/net/lib/ptp/msg.c takes the 4-bit message type straight off the wire via ptp_msg_type() (msg->header.type_major_sdo_id & 0xF, range 0-15) and uses it to index the msg_size[] table. That table only defines entries up to PTP_MSG_MANAGEMENT (0xD), giving it ARRAY_SIZE == 14. Before the fix there was no upper-bound check, so the undefined types 0xE and 0xF indexed one or two int slots past the end of the array — an out-of-bounds read of adjacent read-only data. The out-of-bounds value is then reused as a length: it gates msg_size[type] > cnt, and when it is small or negative it makes cnt - msg_size[type] a large positive budget passed to msg_tlv_post_recv(), whose TLV loop then walks the message suffix past the received bytes, performing further out-of-bounds reads and in-place byte-swap writes on memory beyond the message slab. The defect is reached directly from the network: ptp_port_event_gen() in subsys/net/lib/ptp/port.c reads a PTP frame with ptp_transport_recv() and calls ptp_msg_post_recv() with the attacker-chosen type. PTP uses UDP multicast or raw Ethernet (0x88F7) and is unauthenticated, so any host on the same link can trigger the indexing on a CONFIG_PTP-enabled node with no preconditions. The reliably reproducible impact is a denial of service (fault/crash); a limited memory-corruption path exists but depends on the build-specific value adjacent to msg_size[], which the attacker cannot tune. The fix rejects type >= ARRAY_SIZE(msg_size) with -EBADMSG before any indexing. | ||||
| CVE-2026-12631 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 6.5 Medium |
| The Zephyr kernel validates the k_thread_join() and k_thread_abort() system calls (declared __syscall in include/zephyr/kernel.h) through thread_obj_validate() in kernel/thread.c. Its default switch branch is the access-denied path, taken when k_object_validate() returns -EPERM (the calling user thread was never granted access to the target thread object) or -EBADF (the supplied pointer is not a registered kernel object of the right type). That branch invoked K_OOPS(K_SYSCALL_VERIFY_MSG(ret, "access denied")), but K_SYSCALL_VERIFY_MSG treats a true expression as success; the non-zero error code ret therefore read as "verified OK", the kernel oops was never raised, and control fell through to CODE_UNREACHABLE. Because k_thread_join() and k_thread_abort() are system calls, an unprivileged user-mode thread (under CONFIG_USERSPACE) can reach this denial path directly by calling either syscall on a thread object it does not own. Instead of the offending thread being cleanly terminated, execution reaches __builtin_unreachable() while running in supervisor mode inside the syscall handler. On Clang builds CODE_UNREACHABLE emits an illegal-instruction trap, so a user thread can deterministically crash the kernel — a locally triggerable denial of service that escapes the userspace sandbox. On GCC builds the path is undefined behavior: the compiler may drop the return-value handling for thread_obj_validate(), so it can return an undefined bool; if that is false, the caller proceeds into the real k_thread_join()/k_thread_abort() implementation for a thread the user was never authorized to access, an access-control bypass. The fix changes the verification expression to ret == 0, so a denied (non-zero) result now correctly raises K_OOPS and terminates the offending caller. | ||||
| CVE-2026-12629 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 4.6 Medium |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). | ||||
| CVE-2026-12522 | 1 Zephyrproject | 1 Zephyr | 2026-11-04 | 8.8 High |
| The HL7800 cellular modem driver's +CGCONTRDP: response handler on_cmd_atcmdinfo_ipaddr() in drivers/modem/vendor_standalone/hl7800.c parses the PDP-context dynamic parameters (local address, subnet mask, gateway, and DNS servers) that the cellular network assigns to the device. The response is linearized into a 256-byte stack buffer, after which each address field length is computed from comma/. delimiter positions in the network-supplied data and used directly as the length argument to strncpy() into the fixed 64-byte stack buffer temp_addr_str (and the 16-byte iface_ctx.dns_v4_string). Because the field length is derived from attacker-controlled delimiter positions and was not bounded against the destination buffer, a single field can be far larger than 64 bytes. A malicious or impersonated cellular network (for example a rogue base station) can return a crafted +CGCONTRDP response with an overlong address field, causing strncpy() to write past temp_addr_str on the modem worker thread's stack, plus an out-of-bounds NUL write at temp_addr_str[addr_len]. No device-side privileges or user interaction are required: the device itself issues the AT+CGCONTRDP=1 query during normal network attach and parses whatever the network returns. The overflow corrupts adjacent stack memory in supervisor context, yielding at minimum a remotely triggerable crash and potentially control-flow hijacking on targets without stack protection. The fix bounds every field length against its destination buffer (temp_addr_str and dns_v4_string) before each copy, rejecting overlong fields. | ||||
| CVE-2026-49293 | 1 Sunnyadn | 1 Js-toml | 2026-11-04 | 7.5 High |
| js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.1 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.2 fixes the issue. | ||||
| CVE-2026-111754 | 1 Angular | 1 Angular | 2026-11-04 | 6.1 Medium |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.33, 21.2.25, and 22.2.1, ServerPlatformLocation in Angular server-side rendering checks for protocol-relative URLs before WHATWG URL normalization. A request path containing a popping dot segment followed by multiple slashes can bypass the raw resolveUrl check and normalize to a pathname beginning with two slashes. When Angular SSR detects a mismatch with the router's final location, it can place that pathname in an HTTP Location header, causing a browser to navigate to an attacker-controlled origin. Affected applications use @angular/platform-server and @angular/ssr and either expose compatible parameter or child route shapes or pass user-controlled navigation targets through infrastructure that preserves the relevant dot segments or semicolons. Pure client-side SPAs are not affected. This issue is fixed in versions 20.3.33, 21.2.25, and 22.2.1. | ||||
| CVE-2026-82160 | 1 Dell | 1 Wyse Management Suite | 2026-11-04 | 3.3 Low |
| Dell Wyse Management Suite, versions prior to 2609.0.0.155, contain an Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Script injection. | ||||
| CVE-2026-44009 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-11-04 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, VM2 suffers from a sandbox breakout vulnerability. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2. | ||||
| CVE-2026-44008 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-11-04 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, the new method neutralizeArraySpeciesBatch works with objects from the other side but can call into this side via getter on the array prototype exposing objects of the wrong side into the sandbox. This can be used to get host objects and get the host Function object. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2. | ||||
| CVE-2026-39892 | 2 Cryptography.io, Pyca | 2 Cryptography, Cryptography | 2026-11-04 | 9.8 Critical |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 45.0.0 to before 46.0.7, if a non-contiguous buffer was passed to APIs which accepted Python buffers (e.g. Hash.update()), this could lead to buffer overflows. This vulnerability is fixed in 46.0.7. | ||||
| CVE-2026-82154 | 1 Dell | 1 Os Recovery Tool | 2026-11-04 | 2.4 Low |
| Dell OS Recovery tool versions, prior to 2.4.4, contain a use of Hard-coded Cryptographic Key vulnerability. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Information Disclosure. | ||||
| CVE-2026-54161 | 1 Networkupstools | 1 Nut | 2026-11-04 | 8.1 High |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.8.3 to 2.8.5, upsmon in clients/upsmon.c inserts the server-supplied ups.alarm value into shell commands executed by notify(), async_notify(), and wall(). When a monitored device reports an ALARM state and an operator has configured NOTIFYCMD with EXEC in NOTIFYFLAG ALARM, shell metacharacters in the alarm text are evaluated on POSIX or Windows and can execute arbitrary operating-system commands as the upsmon account, which is commonly root. An attacker can control the value through a malicious or compromised upsd, a man-in-the-middle on a plaintext upsd to upsmon connection, or a compromised UPS device whose driver supplies the alarm upstream of upsd; TLS between upsd and upsmon does not mitigate the compromised-device path. This vulnerability is fixed in 2.8.6. | ||||
| CVE-2026-121197 | 1 Google | 1 Chrome | 2026-11-04 | 8.8 High |
| Out of bounds read in ANGLE in Google Chrome on on Mac prior to 157.0.8103.38 allowed a remote attacker to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-62374 | 1 Openwallet-foundation | 2 Sd-jwt/core, Sd-jwt/decode | 2026-11-04 | 6.5 Medium |
| SD JWT JS is a JavaScript implementation of the Selective Disclosure JWT (SD-JWT) specification. In version 0.19.0 and earlier, `@sd-jwt/decode`, also used by `@sd-jwt/core`, silently drops a tampered Disclosure whose digest no longer matches the Issuer-signed `_sd` array and returns a reduced claim set, reporting success while the Issuer signature remains valid. Both a tampered Disclosure that remains valid JSON and a Disclosure containing invalid UTF-8 bytes reach this silent-drop behavior. In the latter case, the `TextDecoder / Buffer` decoding path substitutes U+FFFD replacement characters, recovering syntactically valid disclosure data instead of rejecting the malformed input. This violates RFC 9901 section 7.1 step 5, which requires rejection of unreferenced Disclosures, and section 7.1 step 3 / section 4.2.1, which require rejection of invalid Disclosures. A malicious holder can exploit this omission primitive, including through `SDJwtInstance.verify()` when key binding is required. An on-path attacker can also tamper with a Disclosure when the relying party does not enforce key binding; enforced key binding rejects on-path tampering because it invalidates the KB-JWT `sd_hash` binding. If the relying party defaults to allowing access when a constraining age, role, or restriction claim is absent, the silent claim reduction can change an authorization decision without an error. This issue is fixed in `@sd-jwt/core` version 0.20.0; no patched version of the standalone `@sd-jwt/decode` package is identified. | ||||
| CVE-2026-119407 | 2 Element, Element-hq | 2 Element, Element-web | 2026-11-04 | 7.1 High |
| Element Web and Element Desktop before 1.12.32 accept guest credentials from URL fragment parameters in loadSession, allowing remote unauthenticated attackers to log out users and clear local stores. Attackers can lure logged-in users into opening links with guest_user_id and guest_access_token to force an attacker-controlled guest session and destroy unbacked end-to-end encryption keys. | ||||
| CVE-2026-119376 | 1 Sqlite | 1 Sqlite | 2026-11-04 | 5.5 Medium |
| SQLite before 3.54.0 contains a stack exhaustion vulnerability that allows attackers to bypass the SQLITE_LIMIT_EXPR_DEPTH limit by chaining COLLATE postfix operators. Attackers can supply roughly 175,000 chained COLLATE operators in SQL or an untrusted database view to trigger unbounded recursion in sqlite3WalkExprNN() and crash the process. | ||||
| CVE-2026-119372 | 1 Sqlite | 1 Sqlite | 2026-11-04 | 5.5 Medium |
| SQLite before 3.54.0 built with FTS3/FTS4 and SQLITE_ENABLE_FTS3_PARENTHESIS contains a use-after-free vulnerability in fts3BestSnippet() caused by dangling cached position-list pointers. Attackers can run a full-text MATCH query combining OR and NEAR operators with snippet() to read freed heap memory and crash the process. | ||||
| CVE-2026-119285 | 1 Gofiber | 1 Fiber | 2026-11-04 | 5.9 Medium |
| Fiber is an Express inspired web framework written in Go. From 2.52.1 until 2.52.3, the CORS middleware's validateDomain wildcard matcher in middleware/cors/utils.go strips the scheme and checks only a host suffix without requiring a dot boundary. An application configured with a wildcard-subdomain AllowOrigins value and AllowCredentials enabled can reflect an unrelated attacker-controlled origin whose host merely ends with the configured base domain. A user who visits that origin can expose authenticated cross-origin responses to the attacker's page; empty-label origins and later comma-space parsing hardening are outside this advisory. This issue is fixed in version 2.52.3. | ||||