Export limit exceeded: 232345 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (232345 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-0241 | 1 Diaconou | 1 Encodedid\ | 2026-05-14 | 7.5 High |
| encoded_id-rails versions before 1.0.0.beta2 are affected by an uncontrolled resource consumption vulnerability. A remote and unauthenticated attacker might cause a denial of service condition by sending an HTTP request with an extremely long "id" parameter. | ||||
| CVE-2026-43160 | 1 Linux | 1 Linux Kernel | 2026-05-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: macsmc: Initialize mutex Initialize struct apple_smc's mutex in apple_smc_probe(). Using the mutex uninitialized surprisingly resulted only in occasional NULL pointer dereferences in apple_smc_read() calls from the probe() functions of sub devices. | ||||
| CVE-2026-43151 | 1 Linux | 1 Linux Kernel | 2026-05-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: iris: Add sanity check for stop streaming" This reverts commit ad699fa78b59241c9d71a8cafb51525f3dab04d4. Revert the check that skipped stop_streaming when the instance was in IRIS_INST_ERROR, as it caused multiple regressions: 1. Buffers were not returned to vb2 when the instance was already in error state, triggering warnings in the vb2 core because buffer completion was skipped. 2. If a session failed early (e.g. unsupported configuration), the instance transitioned to IRIS_INST_ERROR. When userspace attempted to stop streaming for cleanup, stop_streaming was skipped due to the added check, preventing proper teardown and leaving the firmware in an inconsistent state. | ||||
| CVE-2026-43141 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value. | ||||
| CVE-2026-34757 | 3 Debian, Libpng, Pnggroup | 3 Debian Linux, Libpng, Libpng | 2026-05-13 | 5.1 Medium |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.0.9 to before 1.6.57, passing a pointer obtained from png_get_PLTE, png_get_tRNS, or png_get_hIST back into the corresponding setter on the same png_struct/png_info pair causes the setter to read from freed memory and copy its contents into the replacement buffer. The setter frees the internal buffer before copying from the caller-supplied pointer, which now dangles. The freed region may contain stale data (producing silently corrupted chunk metadata) or data from subsequent heap allocations (leaking unrelated heap contents into the chunk struct). This vulnerability is fixed in 1.6.57. | ||||
| CVE-2026-43983 | 1 Pocket-id | 2 Pocket-id, Pocket Id | 2026-05-13 | 8.1 High |
| Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to your services. Prior to 2.6.0, The createTokenFromRefreshToken function (oidc_service.go) validates the refresh token's cryptographic integrity but does not re-validate the user's current authorization state before issuing new tokens. This allows (1) the client to refresh the token indefinitely after authorization revocation, (2) the refresh token to continue to work after the account is disabled, and (3) the token to work after the client is removed from the group. This vulnerability is fixed in 2.6.0. | ||||
| CVE-2026-43165 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In nct7363_present_pwm_fanin, it does not release the reference, causing a resource leak. | ||||
| CVE-2026-43162 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: tegra-video: Fix memory leak in __tegra_channel_try_format() The state object allocated by __v4l2_subdev_state_alloc() must be freed with __v4l2_subdev_state_free() when it is no longer needed. In __tegra_channel_try_format(), two error paths return directly after v4l2_subdev_call() fails, without freeing the allocated 'sd_state' object. This violates the requirement and causes a memory leak. Fix this by introducing a cleanup label and using goto statements in the error paths to ensure that __v4l2_subdev_state_free() is always called before the function returns. | ||||
| CVE-2026-43164 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: udplite: Fix null-ptr-deref in __udp_enqueue_schedule_skb(). syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0] Since the cited commit, udp_lib_init_sock() can fail, as can udp_init_sock() and udpv6_init_sock(). Let's handle the error in udplite_sk_init() and udplitev6_sk_init(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 Read of size 4 at addr 0000000000000008 by task syz.2.18/2944 CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 kasan_report+0xa2/0xe0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200 instrument_atomic_read include/linux/instrumented.h:82 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719 __udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline] udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906 udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064 ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438 ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500 NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6149 [inline] __netif_receive_skb+0xd3/0x370 net/core/dev.c:6262 process_backlog+0x4d6/0x1160 net/core/dev.c:6614 __napi_poll+0xae/0x320 net/core/dev.c:7678 napi_poll net/core/dev.c:7741 [inline] net_rx_action+0x60d/0xdc0 net/core/dev.c:7893 handle_softirqs+0x209/0x8d0 kernel/softirq.c:622 do_softirq+0x52/0x90 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246 ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984 udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442 udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469 udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe5/0x270 net/socket.c:742 __sys_sendto+0x3eb/0x580 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f67b4d9c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8 </TASK> | ||||
| CVE-2026-43166 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced plain identification for encoded extents Only plain data whose start position and on-disk physical length are both aligned to the block size should be classified as interlaced plain extents. Otherwise, it must be treated as shifted plain extents. This issue was found by syzbot using a crafted compressed image containing plain extents with unaligned physical lengths, which can cause OOB read in z_erofs_transform_plain(). | ||||
| CVE-2026-43144 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential kernel oops when probe fails When probe of the sdio brcmfmac device fails for some reasons (i.e. missing firmware), the sdiodev->bus is set to error instead of NULL, thus the cleanup later in brcmf_sdio_remove() tries to free resources via invalid bus pointer. This happens because sdiodev->bus is set 2 times: first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix this by chaning the brcmf_sdio_probe() function to return the error code and set sdio->bus only there. | ||||
| CVE-2026-43145 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix invalid loaded resource table detection imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded resource table even when the current firmware does not provide one. When the device tree contains a "rsc-table" entry, priv->rsc_table is non-NULL and denotes where a resource table would be located if one is present in memory. However, when the current firmware has no resource table, rproc->table_ptr is NULL. The function still returns priv->rsc_table, and the remoteproc core interprets this as a valid loaded resource table. Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when there is no resource table for the current firmware (i.e. when rproc->table_ptr is NULL). This aligns the function's semantics with the remoteproc core: a loaded resource table is only reported when a valid table_ptr exists. With this change, starting firmware without a resource table no longer triggers a crash. | ||||
| CVE-2026-43155 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mux: mmio: fix regmap leak on probe failure The mmio regmap that may be allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind. | ||||
| CVE-2026-23817 | 1 Hpe | 1 Arubaos-cx | 2026-05-13 | 6.5 Medium |
| A vulnerability in the web-based management interface of AOS-CX Switches could allow an unauthenticated remote attacker to redirect users to an arbitrary URL. | ||||
| CVE-2026-43146 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: Add buffer to list only after successful allocation Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating internal buffers. Previously, the buffer was enqueued in `buffers->list` before the DMA allocation. If the allocation failed, the function returned `-ENOMEM` while leaving a partially initialized buffer in the list, which could lead to inconsistent state and potential leaks. By adding the buffer to the list only after `dma_alloc_attrs()` succeeds, we ensure the list contains only valid, fully initialized buffers. | ||||
| CVE-2026-43149 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer. | ||||
| CVE-2026-43154 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix incorrect early exits in volume label handling Crafted EROFS images containing valid volume labels can trigger incorrect early returns, leading to folio reference leaks. However, this does not cause system crashes or other severe issues. | ||||
| CVE-2026-42050 | 1 Imagemagick | 1 Imagemagick | 2026-05-13 | 5.5 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-21 and 6.9.13-46, a malicious MIFF file could trigger an overflow when a user opens it in the display tool and right-clicks a tile to invoke the Load / Update menu item. This vulnerability is fixed in 7.1.2-21 and 6.9.13-46. | ||||
| CVE-2026-40300 | 1 Zulip | 2 Zulip, Zulip Server | 2026-05-13 | 6.5 Medium |
| Zulip is an open-source team collaboration tool. Prior to 12.0, With message_edit_history_visibility_policy set to "moves", /api/v1/messages/{id}/history still returns historical content values, allowing low-privilege users to recover text that was edited away from other users' messages. This vulnerability is fixed in 12.0. | ||||
| CVE-2026-43142 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen1: Destroy internal buffers after FW releases After the firmware releases internal buffers, the driver was not destroying them. This left stale allocations that were no longer used, especially across resolution changes where new buffers are allocated per the updated requirements. As a result, memory was wasted until session close. Destroy internal buffers once the release response is received from the firmware. | ||||