| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A missing validation check in FreeRTOS-Plus-TCP's IPv6 packet processing code can lead to an out-of-bounds read when receiving a IPv6 packet with incorrect payload lengths in the packet header. This issue only affects applications using IPv6.
We recommend users upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes. |
| A Stack-based buffer overflow vulnerability in SMA100 Apache httpd server's mod_cgi module environment variables allows a remote unauthenticated attacker to potentially execute code as a 'nobody' user in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances firmware 10.2.0.8-37sv, 10.2.1.1-19sv, 10.2.1.2-24sv and earlier versions. |
| A security vulnerability has been detected in DCMTK up to 3.6.5. The affected element is the function parseQuota of the component dcmqrscp. The manipulation of the argument StorageQuota leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Upgrading to version 3.6.6 is sufficient to fix this issue. The identifier of the patch is 0fef9f02e. It is recommended to upgrade the affected component. |
| A buffer overflow vulnerability in SonicOS allows a remote attacker to cause Denial of Service (DoS) and potentially execute arbitrary code by sending a malicious request to the firewall. This vulnerability affected SonicOS Gen 6 version 6.5.4.7, 6.5.1.12, 6.0.5.3, SonicOSv 6.5.4.v and Gen 7 version 7.0.0.0. |
| OpenSLP as used in ESXi has a denial-of-service vulnerability due a heap out-of-bounds read issue. A malicious actor with network access to port 427 on ESXi may be able to trigger a heap out-of-bounds read in OpenSLP service resulting in a denial-of-service condition. |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition. |
| A vulnerability was determined in LibTIFF up to 4.5.1. Affected by this issue is the function readSeparateStripsetoBuffer of the file tools/tiffcrop.c of the component tiffcrop. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The patch is identified as 8a7a48d7a645992ca83062b3a1873c951661e2b3. It is recommended to apply a patch to fix this issue. |
| OpenSLP as used in ESXi and the Horizon DaaS appliances has a heap overwrite issue. VMware has evaluated the severity of this issue to be in the Critical severity range with a maximum CVSSv3 base score of 9.8. |
| OpenWrt Project is a Linux operating system targeting embedded devices. Prior to version 24.10.4, local users could read and write arbitrary kernel memory using the ioctls of the ltq-ptm driver which is used to drive the datapath of the DSL line. This only effects the lantiq target supporting xrx200, danube and amazon SoCs from Lantiq/Intel/MaxLinear with the DSL in PTM mode. The DSL driver for the VRX518 is not affected. ATM mode is also not affected. Most VDSL lines use PTM mode and most ADSL lines use ATM mode. OpenWrt is normally running as a single user system, but some services are sandboxed. This vulnerability could allow attackers to escape a ujail sandbox or other contains. This is fixed in OpenWrt 24.10.4. There are no workarounds. |
| OpenWrt Project is a Linux operating system targeting embedded devices. Prior to version 24.10.4, ubusd contains a heap buffer overflow in the event registration parsing code. This allows an attacker to modify the head and potentially execute arbitrary code in the context of the ubus daemon. The affected code is executed before running the ACL checks, all ubus clients are able to send such messages. In addition to the heap corruption, the crafted subscription also results in a bypass of the listen ACL. This is fixed in OpenWrt 24.10.4. There are no workarounds. |
| A vulnerability stemming from floating-point arithmetic precision errors exists in the QuickJS engine's implementation of TypedArray.prototype.indexOf() when a negative fromIndex argument is supplied.
* The fromIndex argument (read as a double variable, $d$) is used to calculate the starting position for the search.
* If d is negative, the index is calculated relative to the end of the array by adding the array's length (len) to d:
$$d_{new} = d + \text{len}$$
* Due to the inherent limitations of floating-point arithmetic, if the negative value $d$ is extremely small (e.g., $-1 \times 10^{-20}$), the addition $d + \text{len}$ can result in a loss of precision, yielding an outcome that is exactly equal to $\text{len}$.
* The result is then converted to an integer index $k$: $k = \text{len}$.
* The search function proceeds to read array elements starting from index $k$. Since valid indices are $0$ to $\text{len}-1$, starting the read at index $\text{len}$ is one element past the end of the array.
This allows an attacker to cause an Out-of-Bounds Read of one element immediately following the buffer. While the scope of this read is small (one element), it can potentially lead to Information Disclosure of adjacent memory contents, depending on the execution environment. |
| In the Linux kernel, the following vulnerability has been resolved:
objtool, spi: amd: Fix out-of-bounds stack access in amd_set_spi_freq()
If speed_hz < AMD_SPI_MIN_HZ, amd_set_spi_freq() iterates over the
entire amd_spi_freq array without breaking out early, causing 'i' to go
beyond the array bounds.
Fix that by stopping the loop when it gets to the last entry, so the low
speed_hz value gets clamped up to AMD_SPI_MIN_HZ.
Fixes the following warning with an UBSAN kernel:
drivers/spi/spi-amd.o: error: objtool: amd_set_spi_freq() falls through to next function amd_spi_set_opcode() |
| Lack of boundary checking of a buffer in set_skb_priv() of modem interface driver prior to SMR Oct-2021 Release 1 allows OOB read and it results in arbitrary code execution by dereference of invalid function pointer. |
| A vulnerability exists in the QuickJS engine's BigInt string conversion logic (js_bigint_to_string1) due to an incorrect calculation of the required number of digits, which in turn leads to reading memory past the allocated BigInt structure.
* The function determines the number of characters (n_digits) needed for the string representation by calculating:
$$ \\ \text{n\_digits} = (\text{n\_bits} + \text{log2\_radix} - 1) / \text{log2\_radix}$$
$$$$This formula is off-by-one in certain edge cases when calculating the necessary memory limbs. For instance, a 127-bit BigInt using radix 32 (where $\text{log2\_radix}=5$) is calculated to need $\text{n\_digits}=26$.
* The maximum number of bits actually stored is $\text{n\_bits}=127$, which requires only two 64-bit limbs ($\text{JS\_LIMB\_BITS}=64$).
* The conversion loop iterates $\text{n\_digits}=26$ times, attempting to read 5 bits in each iteration, totaling $26 \times 5 = 130$ bits.
* In the final iterations of the loop, the code attempts to read data that spans two limbs:
C
c = (r->tab[pos] >> shift) | (r->tab[pos + 1] << (JS_LIMB_BITS - shift));
* Since the BigInt was only allocated two limbs, the read operation for r->tab[pos + 1] becomes an Out-of-Bounds Read when pos points to the last valid limb (e.g., $pos=1$).
This vulnerability allows an attacker to cause the engine to read and process data from the memory immediately following the BigInt buffer. This can lead to Information Disclosure of sensitive data stored on the heap adjacent to the BigInt object. |
| No proper validation of the length of user input in http_server_get_content_type_from_extension. |
| D-Link DIR-816A2_FWv1.10CNB05 was discovered to contain a stack overflow via the statuscheckpppoeuser parameter in the dir_setWanWifi function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Tenda AC6 V2.0 15.03.06.50 was discovered to contain a stack overflow in the ssid parameter in the fast_setting_wifi_set function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Multiple buffer overflows in the SetClientState function of Tenda AC6 v.15.03.06.50 allows attackers to cause a Denial of Service (DoS) via injecting a crafted payload into the limitSpeed, deviceId, and limitSpeedUp parameters. |
| Insufficient Granularity of Access Control vulnerability in opentext Flipper allows Exploiting Incorrectly Configured Access Control Security Levels. The vulnerability could allow a low-privilege user to elevate privileges within the application.
This issue affects Flipper: 3.1.2. |
| Insufficient Granularity of Access Control vulnerability in opentext Flipper allows Exploiting Incorrectly Configured Access Control Security Levels. The vulnerability could allow a low privilege user to interact with the backend API without sufficient privileges.
This issue affects Flipper: 3.1.2. |
