| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| uhttpd is a small HTTP server. In unpatched repository snapshots, `uh_ubus_data_send()` in `ubus.c` can desynchronize HTTP request boundaries when a `POST /ubus` JSON body arrives in multiple TCP segments. An initial segment completing a JSON object sets `du->jsobj`; a later segment takes the existing-object parse-error path and returns zero bytes consumed. The caller neither drains the remaining declared `Content-Length` nor sets `connection_close`. An HTTP request embedded in the unread body suffix is consequently processed as a new request on the same keep-alive connection. The reported reproducer returned a JSON-RPC parse error followed by a second HTTP response. This application-layer body-handler flaw is distinct from Transfer-Encoding header case handling and chunk-length state reset, and affects deployments enabling ubus, including the default OpenWrt configuration and potential proxy/CDN deployments. Repository patches 7b1bec45826bd78c8afc993435bdc0f1df2fe399 and b2285de129b9adc8b12f84f9a27c16c21f2b57a5 address this issue. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| uhttpd is a small HTTP server. In unpatched repository snapshots, `client_parse_header()` in `client.c` lowercases header names but compares the `Transfer-Encoding` value to `chunked` using case-sensitive `strcmp`. A mixed-case transfer-coding token is accepted without enabling `r->transfer_chunked`, despite transfer-coding tokens being case-insensitive. On a keep-alive connection, the `chunked` POST body is left unread and request-shaped body bytes are parsed as another HTTP request, permitting HTTP request smuggling and boundary desynchronization. Commits ae015e099986ceace44975cb69629841a2d58d37 and 6641b050e5f7c7fd9ae92e8e119d6d6dfc6e9837 patch the issue. |
| The Web Interface for OpenWRT LuCI version 19.07 and lower has been discovered to have a cross-site scripting vulnerability. |
| LuCI is the OpenWrt Configuration Interface. Versions prior to both 24.10.5 and 25.12.0, contain a stored XSS vulnerability in the wireless scan modal, where SSID values from scan results are rendered as raw HTML without any sanitization. The wireless.js file in the luci-mod-network package passes SSIDs via a template literal to dom.append(), which processes them through innerHTML, allowing an attacker to craft a malicious SSID containing arbitrary HTML/JavaScript. Exploitation requires the user to actively open the wireless scan modal (e.g., to connect to a Wi-Fi access point or survey nearby channels), and only affects OpenWrt versions newer than 23.05/22.03 up to the patched releases (24.10.6 and 25.12.1). The issue has been fixed in version LuCI 26.072.65753~068150b. |
| A reflected cross-site scripting (XSS) vulnerability in the /admin/system/packages endpoint of Luci OpenWRT v18.06.2 allows attackers to execute arbitrary Javascript in the context of a user's browser via a crafted payload. This vulnerability was fixed in OpenWRT v19.07.0. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to both 24.10.6 and 25.12.1, the jp_get_token function, which performs lexical analysis by breaking input expressions into tokens, contains a memory leak vulnerability when extracting string literals, field labels, and regular expressions using dynamic memory allocation. These extracted results are stored in a jp_opcode struct, which is later copied to a newly allocated jp_opcode object via jp_alloc_op. During this transfer, if a string was previously extracted and stored in the initial jp_opcode, it is copied to the new allocation but the original memory is never freed, resulting in a memory leak. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6, a vulnerability in the hotplug_call function allows an attacker to bypass environment variable filtering and inject an arbitrary PATH variable, potentially leading to privilege escalation. The function is intended to filter out sensitive environment variables like PATH when executing hotplug scripts in /etc/hotplug.d, but a bug using strcmp instead of strncmp causes the filter to compare the full environment string (e.g., PATH=/some/value) against the literal "PATH", so the match always fails. As a result, the PATH variable is never excluded, enabling an attacker to control which binaries are executed by procd-invoked scripts running with elevated privileges. This issue has been fixed in version 24.10.6. |
| In DA, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS09915215; Issue ID: MSV-3801. |
| In wlan service, there is a possible command injection due to improper input validation. This could lead to remote code execution with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00244189; Issue ID: WCNCR00244189. |
| A stored cross-site scripting (XSS) vulnerability was discovered in the Web Interface for OpenWRT LuCI version 19.07 which allows attackers to inject arbitrary Javascript in the OpenWRT Hostname via the Hostname Change operation. |
| There is missing input validation of host names displayed in OpenWrt before 19.07.8. The Connection Status page of the luci web-interface allows XSS, which can be used to gain full control over the affected system via ICMP. |
| applications/luci-app-ddns/luasrc/model/cbi/ddns/detail.lua in the DDNS package for OpenWrt 19.07 allows remote authenticated users to inject arbitrary commands via POST requests. |
| In OpenWrt 19.07.x before 19.07.7, when IPv6 is used, a routing loop can occur that generates excessive network traffic between an affected device and its upstream ISP's router. This occurs when a link prefix route points to a point-to-point link, a destination IPv6 address belongs to the prefix and is not a local IPv6 address, and a router advertisement is received with at least one global unique IPv6 prefix for which the on-link flag is set. This affects the netifd and odhcp6c packages. |
| An issue was discovered in OpenWrt 18.06.0 to 18.06.6 and 19.07.0, and LEDE 17.01.0 to 17.01.7. A bug in the fork of the opkg package manager before 2020-01-25 prevents correct parsing of embedded checksums in the signed repository index, allowing a man-in-the-middle attacker to inject arbitrary package payloads (which are installed without verification). |
| libubox in OpenWrt before 18.06.7 and 19.x before 19.07.1 has a tagged binary data JSON serialization vulnerability that may cause a stack based buffer overflow. |
| libuci in OpenWrt before 18.06.9 and 19.x before 19.07.5 may encounter a use after free when using malicious package names. This is related to uci_parse_package in file.c and uci_strdup in util.c. |
| In OpenWrt LuCI git-20.x, remote unauthenticated attackers can retrieve the list of installed packages and services. NOTE: the vendor disputes the significance of this report because, for instances reachable by an unauthenticated actor, the same information is available in other (more complex) ways, and there is no plan to restrict the information further |
| An exploitable information leak vulnerability exists in the ustream-ssl library of OpenWrt, versions 18.06.4 and 15.05.1. When connecting to a remote server, the server's SSL certificate is checked but no action is taken when the certificate is invalid. An attacker could exploit this behavior by performing a man-in-the-middle attack, providing any certificate, leading to the theft of all the data sent by the client during the first request.An exploitable information leak vulnerability exists in the ustream-ssl library of OpenWrt, versions 18.06.4 and 15.05.1. When connecting to a remote server, the server's SSL certificate is checked but no action is taken when the certificate is invalid. An attacker could exploit this behavior by performing a man-in-the-middle attack, providing any certificate, leading to the theft of all the data sent by the client during the first request. |
