Export limit exceeded: 225546 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (225546 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72120 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). | ||||
| CVE-2026-72119 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms. | ||||
| CVE-2026-72116 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match. | ||||
| CVE-2026-72115 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_notify() on NETDEV_UNREGISTER and in bcm_rx_setup() when SETTIMER reconfigures the timer values. A (re-)claim is only possible on CAN devices in NETREG_REGISTERED dev->reg_state to cover the release in bcm_notify() where reg_state becomes NETREG_UNREGISTERING until synchronize_net(). | ||||
| CVE-2026-72114 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME. | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-72111 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects. | ||||
| CVE-2026-72110 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map. | ||||
| CVE-2026-72018 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | ||||
| CVE-2026-108674 | 1 Jeecg | 1 Jeecg Boot | 2026-10-16 | 4.3 Medium |
| JeecgBoot through 3.9.5 contains a missing authorization vulnerability in the OpenApiController queryById handler that allows low-privileged authenticated users to read OpenAPI definitions without openapi permissions. Attackers can request GET /openapi/queryById with an entry id to obtain internal origin URLs, virtual paths, IP whitelists, and header and parameter templates. | ||||
| CVE-2026-105836 | 1 Webkul | 1 Qloapps | 2026-10-16 | 5.4 Medium |
| QloApps through 1.7.0 contains an authorization bypass vulnerability in AdminProductsController::ajaxProcessBulkUpdateRooms that allows hotel-restricted back-office employees to modify rooms of other hotels. Attackers can submit foreign room IDs in the id_rooms parameter to change status, floor, comments, or inactive dates, disrupting availability and bookings. | ||||
| CVE-2026-108128 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-108127 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-85338 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-10-16 | 7.8 High |
| Out-of-bounds read in Microsoft Graphics Component allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-69947 | 1 Microsoft | 17 Windows 10 21h2, Windows 10 21h2, Windows 10 22h2 and 14 more | 2026-10-16 | 6.8 Medium |
| Heap-based buffer overflow in Windows Overlay Filter allows an unauthorized attacker to execute code with a physical attack. | ||||
| CVE-2026-97765 | 1 Microsoft | 14 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 11 more | 2026-10-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-97743 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-16 | 6.5 Medium |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-96618 | 1 Hexpm | 1 Hex | 2026-10-16 | 4.3 Medium |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex allows an untrusted package mirror to exhaust the memory or disk space of the machine running mix deps.get, mix deps.update, mix hex.package fetch or mix hex.docs fetch. Hex treats a mirror configured with HEX_MIRROR_URL, HEX_MIRROR or mirror_url as untrusted: it doesn't send credentials to it, and it checks registry signatures and package checksums that the mirror can't forge. Several response paths consume memory or disk in proportion to what the mirror sends before any of those checks run. Hex.HTTP.request/5 reads the whole response body into memory and decompresses it with :zlib.gunzip/1 whenever the response's Content-Encoding contains gzip, with no limit on the compressed or decompressed size. Hex doesn't ask for compressed responses, so the server decides whether this step runs. It applies to registry, package, docs and API responses. Package tarballs have no download size limit. Hex 2.5.1 holds the whole tarball in memory and writes it to the cache, and the development branch streams it to a temporary file; the 16 MiB tarball limit is checked only when the file is unpacked. The tarball is then unpacked, into deps/<app> in 2.5.1 and into a staging directory on the development branch, before its checksums are compared with the registry. mix hex.docs fetch, and mix hex.docs offline when docs are missing, write the docs tarball to disk and extract it with :mix_hex_erl_tar.extract/2 without the 16 MiB compressed and 128 MiB decompressed limits that mix_hex_tarball:unpack_docs/3 applies. The signed registry doesn't cover docs tarballs, so nothing checks them. Registry responses are also decompressed before their signature is checked, in hex_core code that Hex vendors; that part is tracked in https://github.com/hexpm/hex_core/security/advisories/GHSA-7c4r-cgf9-9jmq. This issue affects hex: from 0.11.2 before 2.5.2. | ||||
| CVE-2026-96612 | 1 Hexpm | 1 Hex | 2026-10-16 | 8.8 High |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in hexpm hex allows a malicious package publisher to delete a directory outside the project's deps directory and extract package files into it when a developer fetches dependencies. A package release's requirements carry an app label that names the dependency's OTP application. Hex takes this label from the repository's signed registry and uses it as the dependency's application name without validating it (Hex.RemoteConverger.deps/2, Hex.Mix.to_lock/1). Mix derives the dependency's checkout directory as deps/<app>, and Hex.SCM.update/1 runs File.rm_rf!/1 on that directory and unpacks the package into it. hex.pm only checks the label's length, so a publisher can set it to a value such as ../../target. When a project depends on such a release directly or transitively, mix deps.get or mix deps.update deletes the directory the label resolves to and writes the labelled package's files there. This happens before any dependency code is compiled. This issue affects hex: from 0.6.0 before 2.5.2. | ||||
| CVE-2026-89202 | 1 Siemens | 1 Ruggedcom Crossbow | 2026-10-16 | 6.5 Medium |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly perform authorization checks for device disconnection requests. This could allow an authenticated attacker with minimal privileges to disconnect active sessions of other users, including administrators, leading to a denial of service. | ||||