Export limit exceeded: 231739 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (231739 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98802 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | ||||
| CVE-2026-98829 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop oversized fragments to avoid extra_len overflow In ieee80211_rx_h_defragment(), fragment payloads are accumulated into entry->extra_len as subsequent fragments arrive: entry->extra_len += rx->skb->len; When the final fragment arrives, the head fragment is dequeued, and pskb_expand_head() is called with entry->extra_len to ensure sufficient tailroom for all queued fragments before copying: if (skb_tailroom(rx->skb) < entry->extra_len) { if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len, GFP_ATOMIC))) { ... } } while ((skb = __skb_dequeue(&entry->skb_list))) { skb_put_data(rx->skb, skb->data, skb->len); dev_kfree_skb(skb); } In commit 69f132236827 ("mac80211: shrink struct ieee80211_fragment_entry"), entry->extra_len was narrowed from unsigned int to u16 in order to reduce structure memory footprint. However, an IEEE 802.11 frame sequence can contain up to 16 fragments (frag numbers 0..15). If a sequence of large fragments arrives (e.g. from a malicious peer or rogue AP), the sum of fragment lengths can exceed 65535 bytes (for example, 15 fragments of 4400 bytes total 66000 bytes). Because extra_len is a u16, this addition overflows and wraps around modulo 65536 (e.g. 66000 wraps to 464). Consequently, pskb_expand_head() allocates only the truncated amount of tailroom (or is skipped entirely if the head fragment already has >= 464 bytes of tailroom). When skb_put_data() subsequently iterates through the queued skb list, it appends the full payload into the undersized buffer, causing skb_put() to trigger skb_over_panic() and crash the kernel in softirq context. A legitimate MSDU in IEEE 802.11 is at most 2304 bytes (or up to 7935/11454 bytes for A-MSDU, which is not fragmented), well below U16_MAX. Fix this without increasing the size of struct ieee80211_fragment_entry by checking whether adding the incoming fragment length would exceed U16_MAX. If so, purge the queued fragments and drop the frame. [assign a separate drop reason] | ||||
| CVE-2026-98835 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Fix array boundary check The driver performs a sanity check for an array size, when converting a register value to an array index. The check incorrectly accepts the sizeof(array) as a last index, when last valid index should be sizeof(array) - 1. Fix the check by bailing out when index >= sizeof(array). | ||||
| CVE-2026-98844 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfs: clear post-EOF pagecache when extending a file via write Fix netfs to erase the contents of a hole created after the EOF by an ordinary write if dirty data has been previously left there by writes through an mmapped region. Neither the buffered nor the unbuffered/DIO write path clears that stale pagecache. Zero the tail of the folio straddling the EOF before an extending write. That is the only folio that can hold data written past the EOF through an mmap, as pages wholly beyond the EOF can't be faulted in. The folio is zeroed rather than dropped so a concurrent extending write can't lose data. Both write paths downgrade the i_rwsem to shared, so extending writes can run concurrently and the i_size read by the caller may be stale by the time the folio is locked. Re-read i_size under the folio lock and clamp the zeroed range up to it, so a racing write that already put data into the folio isn't clobbered. Wait for any writeback on the folio to finish before zeroing it so that the pagecache isn't modified while it may still be read by the transport during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather than blocking on the folio lock, on writeback, or in folio_mkclean()'s rmap walk when the folio is mapped. truncate_pagecache() can't be used here: it must be called with the i_rwsem held exclusively, but these write paths only hold it shared, and it would block unconditionally, breaking IOCB_NOWAIT. Callers that hold i_rwsem exclusively for the whole resize (truncate, setattr, fallocate, clone) exclude any genuine concurrent buffered writer, so staleness can instead be decided from the folio's dirty state, as pagecache_isize_extended() already does for filesystems that serialise writes against truncate/setattr via a single i_rwsem. Export netfs_clear_stale_post_isize() helper to handle such case. The helper is required by the CIFS client to fix generic/363. | ||||
| CVE-2026-98848 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Assign .num before accessing .hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS) about the number of elements in .hws[], so that it can warn when .hws[] is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in ac100_rtc_register_clks() due to .num being assigned only after every clkout clock has been stored in .hws[]. With CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC 15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report during probe, and with CONFIG_UBSAN_TRAP the first store traps. Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was allocated with, right after the allocation. That is the value the loop counter ends up at on the success path anyway, so the provider's behaviour is unchanged. | ||||
| CVE-2026-107433 | 2 Miniorange, Wordpress-extensions | 2 Wp Oauth Server, Wp Oauth Server | 2026-10-24 | 6.5 Medium |
| Missing Authorization vulnerability in miniOrange WP OAuth Server miniorange-oauth-20-server allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP OAuth Server: from n/a through 6.4.0. | ||||
| CVE-2026-110627 | 2 Macwarrior, Oxygenz | 2 Clipbucket-v5, Clipbucket | 2026-10-24 | 4.7 Medium |
| ClipBucket v5 through 5.5.3-#206 contains a reflected cross-site scripting vulnerability in admin_area/index.php that allows attackers to inject HTML via the val parameter in mode=add_todo. Attackers can lure a logged-in administrator into submitting a cross-site POST form without CSRF protection, executing script in the admin panel origin. | ||||
| CVE-2026-99020 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table. | ||||
| CVE-2026-98789 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix objects stuck in free_by_rcu_ttrace do_call_rcu_ttrace() returns early when call_rcu_ttrace_in_progress is set and leaves the objects in free_by_rcu_ttrace. __free_rcu() frees waiting_for_gp_ttrace only and clears the flag. Hence the objects that free_bulk() or __free_by_rcu() added while RCU tasks trace GP was in flight stay in free_by_rcu_ttrace until free_bulk() or alloc_bulk() is called for the same bpf_mem_cache again, which may never happen. The number of such objects is not bounded. Turn call_rcu_ttrace_in_progress into three states: 0 - idle 1 - __free_rcu() is queued 2 - __free_rcu() is queued and free_by_rcu_ttrace got more objects since do_call_rcu_ttrace() sets 2. __free_rcu() does cmpxchg(1 -> 0) and starts the next GP when it fails. It cannot clear the flag first and check free_by_rcu_ttrace later, since bpf_mem_alloc_destroy() frees bpf_mem_cache without waiting for RCU callbacks when the flag is zero. Now __free_rcu() queues itself, so the one that didn't see 'draining' may do call_rcu_tasks_trace() after rcu_barrier_tasks_trace() in free_mem_alloc(). Queue it under rcu_read_lock() and do synchronize_rcu() before the barriers. Calling rcu_barrier_tasks_trace() twice works too, but creating and destroying hash maps in a loop on many cpus slows down to one free_mem_alloc() per GP and kworkers pile up. | ||||
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-98820 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: set RQF_USE_SCHED when the operation is known The cached requests are allocated for one operation but can be handed out for another. A passthrough command has RQF_USE_SCHED cleared, so using those flags for a subsequent read/write bio will insert it into the scheduler without ->prepare_request() and frees it without ->finish_request(). For kyber, this leaks the domain token acquired at dispatch and stalls the queue. Don't set RQF_USE_SCHED based on the first operation the batch happened to be allocated for. Instead, set it after the request is claimed by an operation. Introduce a helper function, blk_mq_rq_late_init() for this, and absorb blk_mq_rq_time_init() since the two run together. | ||||
| CVE-2026-98822 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prevent AP VLAN tx from other interfaces Since the station lookup was factored out of ieee80211_build_hdr(), ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN frames, not only for control port frames. A unicast frame sent on one interface thus matches a station of a different VLAN of the same BSS and is transmitted to it. Only match stations of the interface the frame is sent on, except for control port frames, since those may be sent for VLAN stations directly on the BSS interface. | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2026-111227 | 2 Netgate, Pfsense | 2 Pfsense, Pfsense | 2026-10-24 | 5.5 Medium |
| Netgate pfSense CE through 2.9.0 contains a CRLF injection vulnerability in services_unbound_acls.php that allows authenticated users with the DNS Resolver: Access Lists privilege to inject Unbound configuration directives. Attackers can embed CR/LF characters in the aclname or aclaction fields written to access_lists.conf to add local-data, local-zone, or forward-zone directives and control DNS answers served to LAN clients. | ||||
| CVE-2026-108438 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-24 | 6.5 Medium |
| Use after free in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-91405 | 1 Oracle | 1 Outside In Technology | 2026-10-24 | 7.5 High |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In PDF Export SDK). The supported version that is affected is 8.5.8. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-54185 | 2 Themeco, Wordpress | 2 Cornerstone, Wordpress | 2026-10-23 | 8.5 High |
| Subscriber SQL Injection in Cornerstone < 7.8.8 versions. | ||||
| CVE-2023-24562 | 1 Siemens | 1 Solid Edge Se2023 | 2026-10-23 | 7.8 High |
| A vulnerability has been identified in Solid Edge SE2022 (All versions < V222.0MP12), Solid Edge SE2023 (All versions < V223.0Update2). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | ||||
| CVE-2026-47768 | 1 Juev | 1 Nebula-mesh | 2026-10-23 | 5.5 Medium |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.2, newly-minted operator API key exposed in redirect URL (Referer, history, proxy logs). This issue has been patched in version 0.3.2. | ||||
| CVE-2026-48058 | 1 Juev | 1 Nebula-mesh | 2026-10-23 | N/A |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh virtual private network. Prior to version 0.3.2, internal/web/session.go and internal/web/oidc.go set HttpOnly and SameSite=Lax on every cookie but never Secure. A single plaintext request to the origin (operator on a LAN, mistyped URL, HTTP→HTTPS not strictly enforced, reverse proxy misconfiguration) discloses the session. This issue has been patched in version 0.3.2. | ||||