Export limit exceeded: 237706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (237706 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-33797 | 2 Juniper, Juniper Networks | 4 Junos, Junos Os Evolved, Junos Os and 1 more | 2026-04-23 | 7.4 High |
| An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS). An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS: * 25.2 versions before 25.2R2 This issue does not affect Junos OS versions before 25.2R1. This issue affects Junos OS Evolved: * 25.2-EVO versions before 25.2R2-EVO This issue does not affect Junos OS Evolved versions before 25.2R1-EVO. eBGP and iBGP are affected. IPv4 and IPv6 are affected. | ||||
| CVE-2026-23331 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected. Let's say we bind() an UDP socket to the wildcard address with a non-zero port, connect() it to an address, and disconnect it from the address. bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put the socket into the 4-tuple hash table. Then, __udp_disconnect() calls sk->sk_prot->rehash(sk). It computes a new hash based on the wildcard address and moves the socket to a new slot in the 4-tuple hash table, leaving a garbage in the chain that no packet hits. Let's remove such a socket from 4-tuple hash table when disconnected. Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after udp_hash4_dec(hslot2) in udp_unhash4(). | ||||
| CVE-2026-23334 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: handle short interrupt urb messages properly If an interrupt urb is received that is not the correct length, properly detect it and don't attempt to treat the data as valid. | ||||
| CVE-2026-23325 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. | ||||
| CVE-2026-23326 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Fix fragment node deletion to prevent buffer leak After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly. | ||||
| CVE-2026-23314 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio() In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns without calling of_node_put(child), causing the device node reference leak. | ||||
| CVE-2026-23323 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver The recently added macsmc-hwmon driver contained several critical bugs in its sensor population logic and float conversion routines. Specifically: - The voltage sensor population loop used the wrong prefix ("volt-" instead of "voltage-") and incorrectly assigned sensors to the temperature sensor array (hwmon->temp.sensors) instead of the voltage sensor array (hwmon->volt.sensors). This would lead to out-of-bounds memory access or data corruption when both temperature and voltage sensors were present. - The float conversion in macsmc_hwmon_write_f32() had flawed exponent logic for values >= 2^24 and lacked masking for the mantissa, which could lead to incorrect values being written to the SMC. Fix these issues to ensure correct sensor registration and reliable manual fan control. Confirm that the reported overflow in FIELD_PREP is fixed by declaring macsmc_hwmon_write_f32() as __always_inline for a compile test. | ||||
| CVE-2026-23324 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: usb: etas_es58x: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. | ||||
| CVE-2026-1660 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user to cause denial of service when importing issues due to improper input validation. | ||||
| CVE-2026-6290 | 1 Rapid7 | 1 Velociraptor | 2026-04-23 | 8 High |
| Velociraptor versions prior to 0.76.3 contain a vulnerability in the query() plugin which allows access to all orgs with the user's current ACL token. This allows an authenticated GUI user with access in one org, to use the query() plugin, in a notebook cell, to run VQL queries on other orgs which they may not have access to. The user's permissions in the other org are the same as the permissions they have in the org containing the notebook. | ||||
| CVE-2026-3254 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 3.5 Low |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user to load unauthorized content into another user's browser due to improper input validation in the Mermaid sandbox. | ||||
| CVE-2026-5262 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 8 High |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.1.0 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an unauthenticated user to access tokens in the Storybook development environment due to improper input validation. | ||||
| CVE-2026-5377 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 4.3 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 18.11.1 that could have allowed an authenticated user to access titles of confidential or private issues in public projects due to improper access control in the issue description rendering process. | ||||
| CVE-2026-5816 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 8 High |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.10.4 and 18.11 before 18.11.1 that could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions. | ||||
| CVE-2019-25709 | 2 Codefuture, Scripteen | 2 Image Hosting Script, Free Image Hosting Script | 2026-04-23 | 9.8 Critical |
| CF Image Hosting Script 1.6.5 allows unauthenticated attackers to download and decode the application database by accessing the imgdb.db file in the upload/data directory. Attackers can extract delete IDs stored in plaintext from the deserialized database and use them to delete all pictures via the d parameter. | ||||
| CVE-2026-6515 | 1 Gitlab | 1 Gitlab | 2026-04-23 | 5.4 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed a user to use invalidated or incorrectly scoped credentials to access Virtual Registries under certain conditions. | ||||
| CVE-2026-1564 | 2 Pega, Pegasystems | 2 Pega Platform, Pega Infinity | 2026-04-23 | 4.8 Medium |
| Pega Platform versions 8.1.0 through 25.1.1 are affected by an HTML Injection vulnerability in a user interface component. Requires a high privileged user with a developer role. | ||||
| CVE-2026-1711 | 2 Pega, Pegasystems | 2 Pega Platform, Pega Infinity | 2026-04-23 | 4.8 Medium |
| Pega Platform versions 8.1.0 through 25.1.1 are affected by a Stored Cross-Site Scripting vulnerability in a user interface component. Requires a high privileged user with a developer role. | ||||
| CVE-2026-39350 | 1 Istio | 1 Istio | 2026-04-23 | 5.4 Medium |
| Istio is an open platform to connect, manage, and secure microservices. In versions 1.25.0 through 1.27.8, 1.28.0 through 1.28.5, 1.29.0, and 1.29.1, the serviceAccounts and notServiceAccounts fields in AuthorizationPolicy incorrectly interpret dots (.) as a regular expression matcher. Because . is a valid character in a service account name, an AuthorizationPolicy ALLOW rule targeting a service account such as cert-manager.io also matches cert-manager-io, cert-managerXio, etc. A DENY rule targeting the same name fails to block those variants. Fixes are available in versions 1.29.2, 1.28.6, and 1.27.9. | ||||
| CVE-2026-40502 | 1 Hkuds | 1 Openharness | 2026-04-23 | 8.8 High |
| OpenHarness prior to commit dd1d235 contains a command injection vulnerability that allows remote gateway users with chat access to invoke sensitive administrative commands by exploiting insufficient distinction between local-only and remote-safe commands in the gateway handler. Attackers can execute administrative commands such as /permissions full_auto through remote chat sessions to change permission modes of a running OpenHarness instance without operator authorization. | ||||