| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: Fix pdsc_check_pci_health function to use work thread
When the driver notices fw_status == 0xff it tries to perform a PCI
reset on itself via pci_reset_function() in the context of the driver's
health thread. However, pdsc_reset_prepare calls
pdsc_stop_health_thread(), which attempts to stop/flush the health
thread. This results in a deadlock because the stop/flush will never
complete since the driver called pci_reset_function() from the health
thread context. Fix by changing the pdsc_check_pci_health_function()
to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's
work queue.
Unloading the driver in the fw_down/dead state uncovered another issue,
which can be seen in the following trace:
WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440
[...]
RIP: 0010:__queue_work+0x358/0x440
[...]
Call Trace:
<TASK>
? __warn+0x85/0x140
? __queue_work+0x358/0x440
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x358/0x440
queue_work_on+0x28/0x30
pdsc_devcmd_locked+0x96/0xe0 [pds_core]
pdsc_devcmd_reset+0x71/0xb0 [pds_core]
pdsc_teardown+0x51/0xe0 [pds_core]
pdsc_remove+0x106/0x200 [pds_core]
pci_device_remove+0x37/0xc0
device_release_driver_internal+0xae/0x140
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xa0
pdsc_cleanup_module+0x10/0x780 [pds_core]
__x64_sys_delete_module+0x142/0x2b0
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fbd9d03a14b
[...]
Fix this by preventing the devcmd reset if the FW is not running. |
| MISP installation scripts generated an Apache HTTP virtual-host configuration containing an incorrectly formatted HTTP-to-HTTPS redirect:
Redirect permanent / https://misp.example
Apache’s Redirect directive appends any portion of the requested path that follows the matched prefix to the configured destination URL. Because the destination did not end with /, attacker-controlled path content was appended directly to the hostname rather than to its URL path.
For example, a request resembling:
http://misp.example/@attacker.example/
could result in a redirect resembling:
https://misp.example@attacker.example/
Under standard URL parsing, misp.example is interpreted as user information and attacker.example as the destination host. An unauthenticated remote attacker could therefore construct a URL hosted under the legitimate MISP domain that redirects users to an attacker-controlled website.
The vulnerability could be used for phishing, credential collection, or potentially disclosing sensitive query-string information preserved during the redirect. Exploitation requires a user to follow the crafted HTTP URL.
The fix adds the missing trailing slash to the redirect destination, ensuring that appended request data remains part of the path on the configured MISP host.
Existing installationsExisting MISP installations should review their Apache HTTP virtual-host configuration and ensure that the HTTPS redirect destination ends with a trailing slash:
Redirect permanent / https://misp.example/
After updating the configuration, validate it with apachectl configtest and reload or restart Apache for the change to take effect |
| IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 and IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 could allow a remote attacker to conduct phishing attacks, caused by an open redirect vulnerability. An attacker could exploit this vulnerability using a specially crafted request to redirect a victim to arbitrary Web sites. |
| The User Frontend: AI Powered Frontend Posting, User Directory, Profile, Membership & User Registration plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.3.1 via the payment_page() function due to missing validation on the 'user_id' user controlled key. This makes it possible for unauthenticated attackers to activate a free subscription pack for any user on the site, overwriting their existing paid subscription and causing loss of paid features. |
| OpenStack Compute (Nova) Grizzly, Folsom (2012.2), and Essex (2012.1) allows remote authenticated users to gain access to a VM in opportunistic circumstances by using the VNC token for a deleted VM that was bound to the same VNC port. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix transport_* TOCTOU
Transport assignment may race with module unload. Protect new_transport
from becoming a stale pointer.
This also takes care of an insecure call in vsock_use_local_transport();
add a lockdep assert.
BUG: unable to handle page fault for address: fffffbfff8056000
Oops: Oops: 0000 [#1] SMP KASAN
RIP: 0010:vsock_assign_transport+0x366/0x600
Call Trace:
vsock_connect+0x59c/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: move notifier's packet_dev_mc out of rcu critical section
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
__mutex_lock+0x106/0xe80 kernel/locking/mutex.c:746
team_change_rx_flags+0x38/0x220 drivers/net/team/team_core.c:1781
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f8/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286 packet_dev_mc net/packet/af_packet.c:3698 [inline]
packet_dev_mclist_delete net/packet/af_packet.c:3722 [inline]
packet_notifier+0x292/0xa60 net/packet/af_packet.c:4247
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11972
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
Calling `PACKET_ADD_MEMBERSHIP` on an ops-locked device can trigger
the `NETDEV_UNREGISTER` notifier, which may require disabling promiscuous
and/or allmulti mode. Both of these operations require acquiring
the netdev instance lock.
Move the call to `packet_dev_mc` outside of the RCU critical section.
The `mclist` modifications (add, del, flush, unregister) are protected by
the RTNL, not the RCU. The RCU only protects the `sklist` and its
associated `sks`. The delayed operation on the `mclist` entry remains
within the RTNL. |
| SuperPlane before 0.27.0 contains a broken object-level authorization vulnerability in the CanvasService gRPC handlers that allows authenticated users with viewer-level access to one organization to access resources belonging to other organizations by supplying arbitrary canvas or queue UUIDs without organization scoping. Attackers can read cross-tenant execution history and event payloads containing sensitive secrets, write queue items and canvas events into victim organizations, delete arbitrary canvases, and disrupt automation workflows across tenant boundaries. |
| Next.js is a React framework for building full-stack web applications. In versions 12.0.0 through 15.5.20 and 16.0.0 through 16.2.10, a
rewrites() or redirects() rule that builds its external destination hostname from request-controlled input can be pointed at an arbitrary hostname, regardless of the rule's hostname suffix. For a rewrite, Next.js proxies the request to that arbitrary host and serves the response from the application's origin, leading to Server-Side Request forgery. A redirects() rule configured this way is vulnerable to an Open Redirect. This issue has been fixed in versions 15.5.21 and 16.2.11. |
| Vvveb before 1.0.8.3 contains an unrestricted file upload vulnerability in the plugin upload endpoint that allows super_admin users to execute arbitrary PHP code by uploading a malicious plugin ZIP file. Attackers can craft a ZIP containing a plugin.php with a valid Slug header and a public/index.php file with arbitrary PHP code, which executes as the web server user once accessed via subsequent unauthenticated HTTP requests to the plugin's public path. |
| Vvveb before version 1.0.8.2 contains an XML external entity (XXE) injection vulnerability in the admin Tools/Import feature that allows authenticated site_admin users to read arbitrary files and modify database records. Attackers can exploit the XML parser configuration in system/import/xml.php to inject file:// or php://filter entity references that are resolved and persisted into the application database, enabling arbitrary file disclosure and administrator password hash overwriting for privilege escalation. |
| Vvveb before 1.0.8.3 contains an uncontrolled recursion vulnerability in the admin controller dispatch cycle where Base::init() repeatedly invokes permission() on error handlers, causing infinite recursion until PHP memory limits are exhausted. Attackers can send sustained requests to forbidden admin URLs from a low-privilege account to exhaust PHP memory on all workers and cause denial of service to legitimate traffic. |
| NovaRad NovaPACS Diagnostics Viewer 8.5.19.75 contains an unauthenticated XML External Entity (XXE) injection vulnerability in XML preference import settings. Attackers can craft malicious XML files with DTD parameter entities to retrieve arbitrary system files through an out-of-band channel attack. |
| Leantime 3.6.2 and prior contains a broken access control vulnerability that allows authenticated users to read milestone data from projects they are not assigned to by supplying arbitrary integer milestone IDs to the tickets.getMilestone JSON-RPC endpoint. Attackers can enumerate integer milestone IDs through the JSON-RPC API to access project planning information, milestone titles, descriptions, and timelines across all projects on the instance regardless of project membership. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()
A DIRECTORY entry's value field is used as the dir_offset for a
recursive call into __tb_property_parse_dir() with no depth counter.
A crafted peer that chains DIRECTORY entries into a back-reference
loop drives the parser until the kernel stack is exhausted and the
guard page fires. Any untrusted XDomain peer (cable, dock, in-line
inspector, adjacent host) that reaches the PROPERTIES_REQUEST
control-plane exchange can trigger this without authentication.
Thread a depth counter through tb_property_parse() and
__tb_property_parse_dir(), and reject blocks that exceed
TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any
observed legitimate XDomain layout.
Operators who do not need XDomain host-to-host discovery can disable
the path entirely with thunderbolt.xdomain=0 on the kernel command
line. |
| SigNoz before 0.134.0 contains an open redirect vulnerability in the SSO authentication flow that allows unauthenticated attackers to steal session tokens from any user on instances configured with Google OAuth, SAML, or OIDC. Attackers can call the unauthenticated sessions context endpoint with a ref parameter pointing to an attacker-controlled host, deliver the resulting crafted login URL to a victim, and receive the victim's access and refresh tokens when they complete SSO authentication. |
| Symfony is a PHP framework for web and console applications and a set of reusable PHP components. Prior to 5.4.52, 6.4.40, 7.4.12, and 8.0.12, Crawler::addXmlContent() set DOMDocument::$validateOnParse = true before loadXML(), re-enabling external entity resolution and allowing attacker-supplied XML to expand file:// entities such as local files. This issue is fixed in versions 5.4.52, 6.4.40, 7.4.12, and 8.0.12. |
| The Awesome Support – WordPress HelpDesk & Support Plugin plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 6.3.7. This is due to the wpas_get_ticket_replies_ajax() function failing to verify whether the authenticated user has permission to view the specific ticket being requested. This makes it possible for authenticated attackers, with subscriber-level access and above, to access sensitive information from all support tickets in the system by manipulating the ticket_id parameter. |
