| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CSV formula injection vulnerability in the export functionality of the Coupa Supplier Portal SaaS platform. The vulnerability arises because certain user-controlled data, such as event names or templates within the Tenders module, are not properly validated or sanitised before being included in CSV files generated by the application. An attacker with low privileges can input specially crafted values that begin with characters interpreted as formulas by spreadsheet applications. When a victim downloads and opens the generated file in a compatible client, the content may be interpreted as a formula, potentially leading to unauthorised actions such as the execution of commands via mechanisms such as DDE, access to information, or interaction with system resources under the victim’s context. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the DHCP client's option walk advances its offset one byte less than its read pointer for every option it skips. A DHCP server, or any host on the link that answers first, can make the client read up to about a kilobyte past the received message, and the same walk copies out-of-bounds bytes into the application's buffer when it retrieves a user option. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops.
The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged.
Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce.
The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. |
| CGI::Cookie versions from 4.67 before 5.00 for Perl allow denial of service via the client cookie expires value used as a regex in parse.
CGI's cookie method reads the Cookie request header through parse, which interpolates the header's expires value unescaped into the substitution pattern that removes it from the cookie string.
A client can make the request die with an invalid pattern, or tie up the process with one that backtracks catastrophically. |
| CGI versions before 5.00 for Perl allow open redirects via HTML entity decoding of the URL after application validation in redirect.
redirect decodes HTML entities in its URL before writing the Location header, so a URL the application has already validated can change meaning. For example, //evil.example/ becomes //evil.example/ and sends the user to another host. |
| CGI versions from 4.71 before 5.00 for Perl allow denial of service via a plain string dereferenced as a symbolic reference in uploadInfo.
uploadInfo dereferences its argument and calls its filename method without checking that it is an upload filehandle. A plain string naming a defined global variable, such as the parameter value from ?upload=0, is treated as a symbolic reference, and the method call on it dies. |
| The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/controller/ll_sw/nordic/lll/lll_conn.c enqueued any non-empty data PDU after only the sequence-number and (for encrypted links) MIC checks, and the corresponding isr_rx() handlers in lll_central_iso.c, lll_peripheral_iso.c, lll_sync_iso.c and lll_scan_aux.c did the same for ISO and extended-advertising PDUs. The nRF radio stores the received header verbatim and truncates only the payload at PCNF1.MAXLEN, so a frame declaring more octets than were configured leaves a node buffer whose len field describes more data than the buffer holds.
An attacker within radio range that can emit a hand-crafted link-layer PDU — for a connection, any peer that establishes an unencrypted LE connection to a connectable advertiser; for CONFIG_BT_CTLR_SYNC_ISO, any broadcaster the device is synchronised to — can set the length byte up to 255 while the controller has programmed a much smaller maximum (lll->dle.eff.max_rx_octets, which is 27 until a Data Length Update, or the negotiated cis_lll->rx.max_pdu). No pairing, authentication or user interaction is required. On encrypted links the CCM MIC check normally rejects such a frame first, so the exposure is on unencrypted traffic, which is why the added check is placed after decryption.
The unchecked length reaches hci_acl_encode() in subsys/bluetooth/controller/hci/hci.c, which performs net_buf_add(buf, pdu_data->len) followed by a memcpy() of that many bytes out of the node_rx pool element. Because CONFIG_BT_CTLR_DATA_LENGTH_MAX and CONFIG_BT_BUF_ACL_RX_SIZE both default to 27, this is an out-of-bounds read of up to roughly 228 bytes past the received PDU and a corresponding out-of-bounds write past the HCI ACL buffer into neighbouring buffers of the same pool; the tailroom test in net_buf_simple_add() is only enforced when CONFIG_NET_BUF_HARDENING (or CONFIG_ASSERT) is enabled. On the ISO paths the same unchecked length makes isoal_rx_append_to_sdu() read past the ISO node buffer and emit adjacent controller RAM to the host as ISO data. The practical result is remote memory corruption and controller crashes, plus disclosure of controller memory into the host data path.
The fix rejects any received PDU whose length exceeds the value that was used to configure the radio reception. Note that lll_sync.c (periodic advertising sync reception) was not changed and still enqueues received PDUs without an equivalent bound. |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255.
Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array.
The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact.
The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. |
| Zephyr's Precision Time Protocol receive handler ptp_msg_post_recv() in subsys/net/lib/ptp/msg.c takes the 4-bit message type straight off the wire via ptp_msg_type() (msg->header.type_major_sdo_id & 0xF, range 0-15) and uses it to index the msg_size[] table. That table only defines entries up to PTP_MSG_MANAGEMENT (0xD), giving it ARRAY_SIZE == 14. Before the fix there was no upper-bound check, so the undefined types 0xE and 0xF indexed one or two int slots past the end of the array — an out-of-bounds read of adjacent read-only data.
The out-of-bounds value is then reused as a length: it gates msg_size[type] > cnt, and when it is small or negative it makes cnt - msg_size[type] a large positive budget passed to msg_tlv_post_recv(), whose TLV loop then walks the message suffix past the received bytes, performing further out-of-bounds reads and in-place byte-swap writes on memory beyond the message slab.
The defect is reached directly from the network: ptp_port_event_gen() in subsys/net/lib/ptp/port.c reads a PTP frame with ptp_transport_recv() and calls ptp_msg_post_recv() with the attacker-chosen type. PTP uses UDP multicast or raw Ethernet (0x88F7) and is unauthenticated, so any host on the same link can trigger the indexing on a CONFIG_PTP-enabled node with no preconditions.
The reliably reproducible impact is a denial of service (fault/crash); a limited memory-corruption path exists but depends on the build-specific value adjacent to msg_size[], which the attacker cannot tune. The fix rejects type >= ARRAY_SIZE(msg_size) with -EBADMSG before any indexing. |
| A security flaw has been discovered in Linksys E5600 1.1.0.26. Affected by this issue is the function init_multipart of the file /cgi-bin/upload_fw.cgi of the component Header Parser. The manipulation results in out-of-bounds write. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.1 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.2 fixes the issue. |
| A vulnerability was identified in Linksys E5600 1.1.0.26. Affected by this vulnerability is the function strcpy of the file /cgi-bin/mesh_login.cgi of the component JSON Request Parser. The manipulation of the argument username/password/token/source/cn/action leads to out-of-bounds write. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, the new method neutralizeArraySpeciesBatch works with objects from the other side but can call into this side via getter on the array prototype exposing objects of the wrong side into the sandbox. This can be used to get host objects and get the host Function object. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 45.0.0 to before 46.0.7, if a non-contiguous buffer was passed to APIs which accepted Python buffers (e.g. Hash.update()), this could lead to buffer overflows. This vulnerability is fixed in 46.0.7. |
| A flaw has been found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected by this vulnerability is the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component MAC Filter Handler. This manipulation of the argument addEffect causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. |
| SD JWT JS is a JavaScript implementation of the Selective Disclosure JWT (SD-JWT) specification. In version 0.19.0 and earlier, `@sd-jwt/decode`, also used by `@sd-jwt/core`, silently drops a tampered Disclosure whose digest no longer matches the Issuer-signed `_sd` array and returns a reduced claim set, reporting success while the Issuer signature remains valid. Both a tampered Disclosure that remains valid JSON and a Disclosure containing invalid UTF-8 bytes reach this silent-drop behavior. In the latter case, the `TextDecoder / Buffer` decoding path substitutes U+FFFD replacement characters, recovering syntactically valid disclosure data instead of rejecting the malformed input. This violates RFC 9901 section 7.1 step 5, which requires rejection of unreferenced Disclosures, and section 7.1 step 3 / section 4.2.1, which require rejection of invalid Disclosures. A malicious holder can exploit this omission primitive, including through `SDJwtInstance.verify()` when key binding is required. An on-path attacker can also tamper with a Disclosure when the relying party does not enforce key binding; enforced key binding rejects on-path tampering because it invalidates the KB-JWT `sd_hash` binding. If the relying party defaults to allowing access when a constraining age, role, or restriction claim is absent, the silent claim reduction can change an authorization decision without an error. This issue is fixed in `@sd-jwt/core` version 0.20.0; no patched version of the standalone `@sd-jwt/decode` package is identified. |
| A weakness has been identified in TOTOLINK A950RG 4.1.2cu.5268_B20221104. This affects the function setAppEasyWizardConfig of the file /cgi-bin/cstecgi.cgi of the component Easy Setup Wizard Handler. Executing a manipulation of the argument functionType can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| Buffer Overflow vulnerability in Proftpd commit 4017eff8 allows a remote attacker to execute arbitrary code and can cause a Denial of Service (DoS) on the FTP service by sending a maliciously crafted message to the ProFTPD service port. |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. |
