| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope session state changes to bound connections
ksmbd_all_conn_set_status() treats every connection whose transient
binding flag is set as belonging to the target SessionId. A logoff or
session replacement can consequently move an unrelated connection to
NEED_RECONNECT or NEED_SETUP.
Pass the target session itself and select connections using either the
connection-local session xarray or the session's permanent channel list.
Use the same association test while waiting for requests to drain.
Serialize session-wide status changes under request_lock and do not
overwrite EXITING or RELEASING. Protect the shutdown transition with the
same lock so a concurrent session update cannot revive a closing
connection. |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-security-providers-jwt). Supported versions that are affected are 4.0.0-4.5.5 and 27.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. While the vulnerability is in Helidon, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 5.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:L/I:N/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never
clears VM_MAYWRITE on the resulting read-only mapping. This allows
a userspace daemon to mmap the per-queue command buffer PROT_READ,
then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was
never cleared.
The command buffer holds struct ublksrv_io_desc entries that are
kernel-written ABI; a writable mapping lets an unprivileged daemon
process corrupt fields such as addr, op_flags, nr_sectors, and
start_sector.
Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and
the 2026-08-13 ptp/vmclock fix (a5edadbae57e).
Verified via mprotect() PoC: before the fix, a PROT_READ mapping can
be upgraded to PROT_READ|PROT_WRITE and a write into the command
buffer corrupts io_desc fields (confirmed under KASAN). After the
fix, mprotect() returns -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
Currently, Alpha's pci_mmap_resource() does not check
security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap
PCI BARs.
The generic version has had this check since commit eb627e17727e ("PCI:
Lock down BAR access when the kernel is locked down") to prevent DMA
attacks when the kernel is locked down.
Add the same check to Alpha's pci_mmap_resource(). |
| gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening. |
| When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations. |
| While investigating ARTEMIS-2964 it was found that the creation of advisory messages in the OpenWire protocol head of Apache ActiveMQ Artemis 2.15.0 bypassed policy based access control for the entire session. Production of advisory messages was not subject to access control in error. |
| Improper authorization in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| Improper Authorization vulnerability in nerves-hub nerves_hub_web allows cross-organization device control via device bulk actions and device update API.
Missing authorization checks in the device bulk actions and device update API endpoints allow authenticated users to target devices belonging to other organizations and perform actions outside of their privilege level.
An attacker can select devices outside of their organization by manipulating device identifiers and perform management actions on them, such as moving them to products they control. This may allow attackers to interfere with firmware updates, access device functionality exposed by the platform, or disrupt device connectivity.
In environments where additional features such as remote console access are enabled, this could lead to full compromise of affected devices.
This issue affects nerves_hub_web: from 1.0.0 before 2.4.0. |
| Hirschmann Industrial HiVision versions 06.0.00 and 07.0.00 prior to 06.0.06 and 07.0.01 contains an improper authorization vulnerability that allows read-only users to gain write access to managed devices by bypassing access control mechanisms. Attackers can exploit alternative interfaces such as the web interface or SNMP browser to modify device configurations despite having restricted permissions. |
| A security vulnerability has been detected in decolua 9router up to 0.3.47. The impacted element is an unknown function of the file /api of the component Administrative API Endpoint. The manipulation leads to authorization bypass. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.3.75 is sufficient to resolve this issue. It is suggested to upgrade the affected component. |
| The Icons Factory plugin for WordPress is vulnerable to Arbitrary File Deletion due to insufficient authorization and improper path validation within the delete_files() function in all versions up to, and including, 1.6.12. This makes it possible for unauthenticated attackers to to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| The weDocs plugin for WordPress is vulnerable to unauthorized access in all versions up to, and including, 2.1.14. This is due to the plugin not properly verifying that a user is authorized to perform an action in the create_item_permissions_check function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify global plugin settings. |
| The g-FFL Cockpit plugin for WordPress is vulnerable to unauthorized modification of data due to IP-based authorization that can be spoofed in the handle_enqueue_only() function in all versions up to, and including, 1.7.1. This makes it possible for unauthenticated attackers to delete arbitrary products. |
| InvenTree is an Open Source Inventory Management System. Prior to 1.2.7 and 1.3.0, any users who have staff access permissions can install plugins via the API, without requiring "superuser" account access. This level of permission requirement is out of alignment with other plugin actions (such as uninstalling) which do require superuser access. The vulnerability allows staff users (who may be considered to have a lower level of trust than a superuser account) to install arbitrary (and potentially harmful) plugins. This vulnerability is fixed in 1.2.7 and 1.3.0. |
| InvenTree is an Open Source Inventory Management System. Prior to 1.2.7 and 1.3.0, a non-staff authenticated user can elevate their account to a staff level via a POST request against their user account endpoint. The write permissions on the API endpoint are improperly configured, allowing any user to change their staff status. This vulnerability is fixed in 1.2.7 and 1.3.0. |
| PlaciPy is a placement management system designed for educational institutions. In version 1.0.0, the code evaluation endpoint does not validate the assessment lifecycle state before allowing execution. There is no check to ensure that the assessment has started, is not expired, or the submission window is currently open. |
| PolarLearn is a free and open-source learning program. In 0-PRERELEASE-16 and earlier, the group chat WebSocket at wss://polarlearn.nl/api/v1/ws can be used without logging in. An unauthenticated client can subscribe to any group chat by providing a group UUID, and can also send messages to any group. The server accepts the message and stores it in the group’s chatContent, so this is not just a visual spam issue. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.2.10, an authentication bypass vulnerability in FUXA allows an unauthenticated, remote attacker to gain administrative access via the heartbeat refresh API and execute arbitrary code on the server. This issue has been patched in FUXA version 1.2.10. |
| monetr is a budgeting application focused on planning for recurring expenses. Prior to 1.12.3, a transaction integrity flaw allows an authenticated tenant user to soft-delete synced non-manual transactions through the transaction update endpoint, despite the application explicitly blocking deletion of those transactions via the normal DELETE path. This bypass undermines the intended protection for imported transaction records and allows protected transactions to be hidden from normal views. This vulnerability is fixed in 1.12.3. |
