| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| Off-by-one Error vulnerability in Apache Tomcat impacting the [N] flag on the rewrite valves causes rewrite processing to restart at the second rule rather than the first rule.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121 which fix the issue. |
| Out-of-bounds read in Remote Desktop Client allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place. |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - validate input packet lengths
iforce_process_packet() reads fixed fields from joystick, wheel and
status packets without first checking their lengths. In particular, the
shared hats-and-buttons helper unconditionally reads data[6]. The status
tail is a sequence of 16-bit effect addresses, but an incomplete final
address is also consumed. A successful zero-length USB URB additionally
reads the packet ID before the common parser is called.
Reject the zero-length USB transfer, require the seven-byte joystick and
wheel prefixes and the two-byte status prefix, and consume only complete
status-tail addresses. |
| ParseAcceptLanguage quadratic-time DoS via Locale middleware on unauthenticated requests |
| Repository Visibility Manipulation via Git Push Options |
| No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally. |
| No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 IBM PowerVM could allow a local attacker to obtain sensitive information or cause a denial of service due to improper control of format strings. |
| Improper neutralization of input used for LLM prompting in the python_repl tool in Amazon Strands Agents Tools before 0.8.5 might allow remote actors to execute arbitrary Python code on the agent's host by bypassing the human consent gate, via a crafted prompt that forwards non_interactive_mode as a keyword argument through the batch tool. To remediate this issue, users should upgrade to version 0.8.5 or later. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the ASMI web interface. An unauthenticated attacker on the management network can cause the ASMI web server to crash with possible memory corruption and generate an error log; hosted partitions are not affected. The ASMI web interface will restart automatically; however, repeated exploitation could result in a sustained loss of access to the ASMI management interface, resulting in an integrity and availability impact. |
| A flaw in Node.js Permission Model enforcement allows `trace_events.createTracing().enable()` Writes Trace Logs Outside `--allow-fs-write`.
This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations.
This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**. |
| When reading a specially crafted ZIP archive, or a derived formats, an Apache Ant build can be made to allocate large amounts of memory that leads to an out of memory error, even for small inputs. This can be used to disrupt builds using Apache Ant. Commonly used derived formats from ZIP archives are for instance JAR files and many office files. Apache Ant prior to 1.9.16 and 1.10.11 were affected. |
| When reading a specially crafted TAR archive an Apache Ant build can be made to allocate large amounts of memory that finally leads to an out of memory error, even for small inputs. This can be used to disrupt builds using Apache Ant. Apache Ant prior to 1.9.16 and 1.10.11 were affected. |
| The POST /api/provider-nodes/validate route in 9router takes a caller-supplied baseUrl and issues server-side HTTP requests to it, guarding the destination with assertPublicUrl from src/shared/utils/ssrfGuard.js. That guard compares hostname strings only: it resolves no DNS, does not revalidate after a redirect, and its IPv4-mapped IPv6 branch is unreachable. The branch matches ^::ffff:(\d+\.\d+\.\d+\.\d+)$, but the WHATWG URL parser canonicalizes such literals to hextets before the guard runs, so new URL("http://[::ffff:127.0.0.1]/").hostname yields [::ffff:7f00:1] and the pattern is tested against a string it is never handed. Every IPv4-mapped address therefore passes, and http://[::ffff:7f00:1] and http://[::ffff:a9fe:a9fe] reach loopback and link-local metadata addresses; a hostname whose A record points at an internal address passes as well because no resolution occurs. In the custom-embedding branch the upstream response body is truncated to 200 bytes and returned to the caller whenever the upstream status is neither 2xx nor 401 nor 403, which discloses the beginning of internal responses, and the other validation types remain usable for blind internal port scanning through status and timing differences. The caller-supplied apiKey is forwarded to the internal destination as an Authorization Bearer header. A dashboard session is required by default, and none is required when requireLogin is disabled. |
