| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Visual Studio allows an unauthorized attacker to execute code over a network. |
| Stack-based buffer overflow in SQL Server allows an authorized attacker to execute code over a network. |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound the connect_sn TLV walk to the skb
Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and
add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(),
and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in
TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and
nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same
pattern remains unbounded: nfc_llcp_connect_sn().
nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header
(type, length) followed by length bytes of value, without checking that
the two header bytes or the declared length stay within the buffer. It
returns a pointer to a service name of up to 255 bytes that may point
past the end of the skb; it is subsequently consumed by memcmp() in
nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as
"skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter
than the LLCP header underflows to a huge length and the walk runs far
past the buffer.
nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and
nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby
NFC device can reach this without authentication; LLCP link activation
happens automatically after NFC-DEP, and the nfc_llcp_rx_skb()
dispatcher applies no minimum-length guard.
Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and
validate each declared length before use, matching the approach already
used for nfc_llcp_recv_snl(). Starting the walk at
&skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the
size_t underflow for short frames.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses
EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated,
but their get and put callbacks access the value through
ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but wsa-macro was missed.
On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value
sanity check and every read of these controls fails with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Allocate iomap inline_data using alloc_page
This fixes a BUG reported in iomap_write_end_inline:
iomap_inline_data_valid checks that the inline_data fits within
a page. If the inline_data is allocated with kmemdup there's no
guarantee that it's page-aligned, so the check sometimes fails.
Allocate it with alloc_page to ensure it's page-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
The DBSC5 DRAM controller protects DRAM content using inline ECC.
The inline ECC utilizes areas of DRAM for its operation, which are
in the DRAM address range, but must not be accessed or modified.
Describe the inline ECC carveout areas used by the DBSC5 controller
on this hardware as reserved-memory, which must not be accessed.
Include DRAM areas which are unprotected by ECC as well, those are
parts of the DRAM which directly precede the ECC carveout.
In case of high DRAM utilization, unless the inline ECC carveouts
are properly reserved, Linux may use and corrupt the memory used
by the DBSC5 DRAM controller for inline ECC, which would lead to
the system becoming unstable. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject unrepresentable multicast TVLV offsets
The network and transport header fields in struct sk_buff are 16-bit
offsets from skb->head, and U16_MAX is reserved as the unset transport
header value. batadv_tvlv_call_handler() sets both fields from a received
multicast TVLV without checking whether the TVLV end is representable.
If the end offset exceeds the field's range, skb_set_transport_header()
truncates it so that the transport header precedes the network header.
The negative difference is then returned by skb_network_header_len() as
a large u32. batadv_mcast_forw_packet() consequently accepts an oversized
multicast tracker and accesses memory beyond the skb data.
Add skb_set_transport_header_careful(), an offset-aware counterpart to
skb_reset_transport_header_careful(), which validates the final
head-relative offset before assigning it. Use the new helper in
batadv_tvlv_call_handler() and reject unrepresentable TVLVs before
setting the network header. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: option: fix slab OOB read in interrupt URB callback
The interrupt URB buffer is allocated in setup_port_interrupt_in() based
on the endpoint's wMaxPacketSize:
buffer_size = usb_endpoint_maxp(epd);
port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
When a USB device declares wMaxPacketSize = 8 on its interrupt IN
endpoint, the buffer is allocated from kmalloc-8 cache (exactly
8 bytes).
If the device sends a short packet (actual_length < wMaxPacketSize),
the URB completes with status == 0 and the callback proceeds to read:
data[sizeof(struct usb_ctrlrequest)]
which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte
buffer. This results in a slab out-of-bounds read.
Fix this by adding the missing bounds check: first verify that the
actual length is large enough to contain the struct usb_ctrlrequest
header before accessing req_pkt->bRequestType and req_pkt->bRequest,
and then verify that there is an additional byte for the modem signal
state before reading data[sizeof(struct usb_ctrlrequest)] inside the
conditional. Use sizeof(*req_pkt) instead of sizeof(struct
usb_ctrlrequest) for consistency.
[ johan: use dev_err(); split signals declaration and initialisation ] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec()
io_vec_fill_bvec() computes the folio size with a plain int 1:
unsigned long folio_size = 1 << imu->folio_shift;
imu->folio_shift is unsigned int and comes from folio_shift() of the
folio backing the registered buffer, so it can be 32 or more on a 64 bit
kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the
count is taken modulo 32, so a shift of 34 yields 4 rather than 16G.
Every other folio_shift shift in this file already uses 1UL.
The result is that the segment estimate and the fill loop disagree.
io_estimate_bvec_size() sizes the bvec array with the real shift:
max_segs += (iov[i].iov_len >> shift) + 2;
so a 1M iovec on a 16G folio is charged 2 segments, while
io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4
bytes and writes res_bvec[bvec_idx] a quarter of a million times, past
the end of the array it was given. src_bvec is advanced once per
iteration as well, so imu->bvec is read past its end at the same time.
validate_fixed_range() only checks that the range is inside the
registered buffer and does not bound the segment count.
Reaching it needs a folio with a shift of at least 32, which means a
gigantic hugetlb page: 16G on arm64 with 64K pages, where
CONT_PMD_SHIFT is 34 and hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT)
registers that size, and likewise on powerpc. x86_64 tops out at 1G, so
a shift of 30, which still fits in int and is unaffected.
Use 1UL, as the rest of the file does. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: digital: clamp SENSF_RES length to the destination buffer
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_aml: validate firmware segment lengths
aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.
Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: dummy: Check card index validity at probe
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
