Export limit exceeded: 10273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10273 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64578 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A remote client can craft a compound request whose last element has exactly 64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte past the receive buffer, producing a slab-out-of-bounds read. BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14 The buggy address is located 172 bytes inside of allocated 173-byte region Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ... kasan_report (mm/kasan/report.c:595) ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) handle_ksmbd_work (fs/smb/server/server.c:119) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Reject any compound element that is too small to hold StructureSize2 before dereferencing it. | ||||
| CVE-2026-64577 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: gtp: check skb_pull_data() return in gtp1u_send_echo_resp() gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr + gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For a 16-19 byte echo request the pull fails and returns NULL without advancing skb->data; execution continues, and the following skb_push() plus the IP header pushed by iptunnel_xmit() move skb->data below skb->head, tripping skb_under_panic(). Fix it by dropping the packet when skb_pull_data() fails. skbuff: skb_under_panic: ... kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:2648) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82) gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920) udp_queue_rcv_one_skb (net/ipv4/udp.c:2388) ... Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-64573 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NVM tag length underflow in TLV parser In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is "while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a size_t (12), so "length" is converted to size_t and any firmware-supplied "length" < 12 makes the subtraction wrap to a huge value. The loop body then reads a 12-byte struct tlv_type_nvm past the end of the short vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it). Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both operands are non-negative, so it no longer underflows and a "length" too small for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) | ||||
| CVE-2026-64565 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well] | ||||
| CVE-2026-20846 | 1 Microsoft | 31 Office, Windows 10 1607, Windows 10 1809 and 28 more | 2026-08-19 | 7.5 High |
| Buffer over-read in Windows GDI+ allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2020-15670 | 1 Mozilla | 4 Firefox, Firefox Esr, Firefox Mobile and 1 more | 2026-08-19 | 8.8 High |
| Mozilla developers reported memory safety bugs present in Firefox for Android 79. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 80, Firefox ESR < 78.2, Thunderbird < 78.2, and Firefox for Android < 80. | ||||
| CVE-2026-2229 | 2 Nodejs, Undici | 2 Undici, Undici | 2026-08-19 | 7.5 High |
| ImpactThe undici WebSocket client is vulnerable to a denial-of-service attack due to improper validation of the server_max_window_bits parameter in the permessage-deflate extension. When a WebSocket client connects to a server, it automatically advertises support for permessage-deflate compression. A malicious server can respond with an out-of-range server_max_window_bits value (outside zlib's valid range of 8-15). When the server subsequently sends a compressed frame, the client attempts to create a zlib InflateRaw instance with the invalid windowBits value, causing a synchronous RangeError exception that is not caught, resulting in immediate process termination. The vulnerability exists because: * The isValidClientWindowBits() function only validates that the value contains ASCII digits, not that it falls within the valid range 8-15 * The createInflateRaw() call is not wrapped in a try-catch block * The resulting exception propagates up through the call stack and crashes the Node.js process | ||||
| CVE-2026-72160 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72285 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Reject concurrent change to CPUID entry count Reject KVM_TDX_INIT_VM if userspace changes cpuid.nent between the initial read and the subsequent copy of the initialization data. tdx_td_init() first reads user_data->cpuid.nent to size the flexible kvm_tdx_init_vm copy. The copied structure also contains cpuid.nent, and that field can differ from the value used to size the allocation if userspace modifies the input concurrently. setup_tdparams_cpuids() later passes init_vm->cpuid.nent to kvm_find_cpuid_entry2(), which uses it as the array bound for the copied entries. Require the copied count to match the value used to size the allocation so that CPUID parsing cannot access beyond the entries actually copied. | ||||
| CVE-2026-72300 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code. | ||||
| CVE-2026-72244 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpu/buddy: bail out of try_harder when alignment cannot be honoured The try_harder contiguous fallback could return a range whose start offset did not match the caller's min_block_size. When a candidate's start is misaligned, realign it: free the misaligned run and reallocate exactly @size at the next lower min_block_size boundary. This keeps the returned size unchanged with no surplus to trim, and rejects the request only when no aligned candidate fits. v2: align misaligned candidates down to min_block_size instead of bailing out, for both the RHS and LHS paths (Matthew). | ||||
| CVE-2026-72011 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/diag: Add missing array_index_nospec() call to memtop_get_page_count() 'level' is user space controlled and used to read from an array. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-68455 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type. | ||||
| CVE-2026-72046 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq->tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing. | ||||
| CVE-2026-72076 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging The debug logging in ims_pcu_irq() unconditionally prints data from pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the control URB exceeds pcu->max_in_size, this leads to an out-of-bounds read. Fix this by printing from the correct buffer associated with the URB. | ||||
| CVE-2026-72078 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - validate control endpoint type The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint. | ||||
| CVE-2026-72089 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. Reject logs whose size is smaller than the header (which also rejects size == 0). | ||||
| CVE-2026-72232 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | ||||
| CVE-2026-68458 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: cache secctx size before release zeroes it binder_transaction() bounds the scatter-gather buffer area with sg_buf_end_offset and subtracts the aligned LSM context size because the secctx is written at the tail of that area. The subtraction reads lsmctx.len, but that field has already been cleared by the time the line runs: security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */ lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64)) extra_buffers_size += lsmctx_aligned_size ... security_release_secctx(&lsmctx) /* memset zeroes len */ ... sg_buf_end_offset = sg_buf_offset + extra_buffers_size - ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */ security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len reads back as 0 and the subtraction contributes nothing, leaving sg_buf_end_offset too large by the aligned secctx size on every transaction to a txn_security_ctx node. Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset - sg_buf_offset as the sole upper bound on its copy, so the inflated end offset lets the copy run into the bytes that already hold the secctx. The aligned size must therefore be cached before release rather than re-read from the now-cleared field. Fix by caching it in lsmctx_aligned_size at function scope when it is first computed and subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after release. Reuse the same value for the earlier buf_offset computation. | ||||
| CVE-2026-72296 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ife: require ETH_HLEN to be pullable in ife_decode() ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. | ||||