Export limit exceeded: 10122 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10122 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68124 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.6 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68478 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: reject a card that reports too many blocks msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks. | ||||
| CVE-2026-68474 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access() spufs_mem_mmap_access() computes the local store offset as address - vma->vm_start, but bounds-checks it against vma->vm_end instead of the local store size. On 64-bit, offset is always well below vma->vm_end, so the clamp never fires and len stays unbounded against the LS_SIZE buffer returned by ctx->ops->get_ls(). Reject offsets at or beyond LS_SIZE and clamp len to the remaining space, mirroring the guard already used by spufs_mem_mmap_fault() and spufs_ps_fault(). | ||||
| CVE-2026-73193 | 1 Perl5-dbi | 1 Dbi | 2026-08-18 | 9.8 Critical |
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write on 32-bit perl via an integer wraparound in the output buffer size computed by preparse. preparse reserves its output buffer with `newSV(strlen(statement) * 7 + 16)`, budgeting seven output bytes per input byte for the longest ':p99999' expansion. The product is computed in STRLEN, which is 32 bits wide on a 32-bit perl build, so a statement of 613,566,757 bytes multiplies to 4,294,967,299, wraps modulo 2^32 to 3, and reserves 19 bytes. The parser then copies the statement out through a raw pointer with no capacity check, writing the whole 585 MB input past the end of the allocation. The 99,999 placeholder limit does not bound this path, which is reached by ordinary non-placeholder content. Any caller that passes an untrusted statement of that length to preparse on a 32-bit perl gets a heap out-of-bounds write of attacker controlled bytes. Builds with a 64-bit STRLEN are not affected, since the wrap there needs a statement of about 2.3 exabytes. | ||||
| CVE-2026-72018 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL. | ||||
| CVE-2026-72025 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. | ||||
| CVE-2026-72226 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements. | ||||
| CVE-2026-71969 | 1 Op-tee | 1 Op-tee Os | 2026-08-17 | 6.7 Medium |
| OP-TEE OS through 4.10.0, fixed in commit 7b8b494, contains a buffer underwrite vulnerability in the RSA NOPAD encrypt and decrypt operations within the mbedTLS software backend and SE050 hardware driver that allows a malicious Trusted Application to corrupt secure-world heap memory by supplying an input length exceeding the RSA modulus size. When src_len exceeds rsa_len, the subtraction expression wraps to a large unsigned value, causing a subsequent memcpy to write attacker-controlled data before the destination buffer in S-EL1 secure-world heap memory. | ||||
| CVE-2026-72277 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if guest VNCR isn't normal memory When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable memory attributes, even if the underlying PFN isn't memory. This gets particularly hairy if the endpoint doesn't support cacheable memory attributes, potentially throwing an SError on writeback... While KVM does permit cacheable memory attributes on certain PFNMAP VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the simpler thing for now and just reject everything that isn't memory. | ||||
| CVE-2026-72217 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing xdr_buf_to_bvec() writes a bio_vec into the caller's array before testing whether that slot is in range, and the head branch performs the store with no check at all. When the caller's budget is exactly used up, the next store lands one element past the end of the array. The overflow label returns count - 1, which masks the surplus store but cannot undo it. rq_bvec, the array passed by nfsd_vfs_write(), is allocated to exactly rq_maxpages entries with no slack. The OOB store can land in adjacent slab memory; the bv_len and bv_offset fields written there are derived from client-supplied RPC payload sizes. Move the in-range check ahead of the store in the head, page-loop, and tail branches. With the check at the top of each sequence, count is incremented only after a successful store, so the overflow label can return count directly. | ||||
| CVE-2026-72298 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | ||||
| CVE-2026-74554 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup() ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is wrong: dp_peer->peer_id for an MLO peer always carries the ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS (256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The intended bitmap entry also never gets cleared, so subsequent ath12k_peer_ml_alloc() calls eventually run out of IDs. The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and is stored in ahsta->ml_peer_id. Use that instead. While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so the bitmap and ahsta->ml_peer_id stay in sync. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74300 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses. | ||||
| CVE-2023-6931 | 3 Debian, Linux, Redhat | 6 Debian Linux, Linux Kernel, Enterprise Linux and 3 more | 2026-08-17 | 7.8 High |
| A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation. A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group(). We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b. | ||||
| CVE-2026-72301 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get In sof_ipc3_bytes_put(), the size used for the memcpy is derived from the old data->size already in the buffer, not the incoming new data's size field. If the new data has a different size, the copy length is wrong: it may truncate valid data or copy stale bytes. Similarly, sof_ipc3_bytes_get() checks data->size against max_size without accounting for the sizeof(struct sof_ipc_ctrl_data) offset of the flex array within the allocation. Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata) from the bounds check to match the actual available space. | ||||
| CVE-2026-72153 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data. | ||||
| CVE-2026-70461 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 8.2 High |
| rsync 3.2.5 before 3.5.0 contains a heap out-of-bounds write vulnerability that allows remote unauthenticated attackers to write one attacker-controlled byte past the end of a heap allocation by supplying a crafted files-from entry. Attackers can trigger the vulnerability against a read-only rsync daemon module by providing a files-from entry containing both an interior and trailing backslash, causing the add_implied_include() function to under-count the trailing backslash when sizing the destination buffer. | ||||
| CVE-2026-70458 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 8.2 High |
| rsync 3.0.0 before 3.5.0 contains an out-of-bounds write vulnerability that allows attackers to corrupt memory by triggering HLINK_BUMP processing on file entries with the FLAG_HLINKED flag set while the hard-link preservation option is inactive. Attackers can exploit the missing F_SUM field in the file_struct layout to access memory past the end of the allocated structure, corrupting adjacent heap or stack data. | ||||
| CVE-2026-70457 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 6.5 Medium |
| rsync 3.2.3 before 3.5.0 contains an out-of-bounds write in parse_size_arg() where the return value of snprintf() is used directly as an index into a .bss-segment array without bounds checking. When snprintf truncates the formatted size string, the return value equals the number of characters that would have been written including the truncated portion, and this value may exceed the array length. The subsequent indexed write targets memory outside the intended array bounds, corrupting .bss memory. | ||||
| CVE-2026-70456 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 8.2 High |
| rsync 3.0.1 before 3.5.0 contains an out-of-bounds write vulnerability in the read_args() function that allows a malicious sender to corrupt adjacent heap memory by sending a crafted argument list. When the argument count causes the argv allocation to be exactly full, the trailing NULL terminator is written one slot beyond the allocation boundary, corrupting adjacent heap memory. | ||||