Export limit exceeded: 235608 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 33202 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (33202 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-112061 | 1 Rtmpdump | 1 Librtmp | 2026-10-19 | 4.3 Medium |
| librtmp (RTMPDump) through 2.6 contains a heap out-of-bounds read vulnerability in AMFProp_Decode that reads an AMF0 strict-array element count before checking that four bytes remain. A malicious RTMP server or man in the middle can send an AMF0 body ending with a strict-array type byte and fewer than four trailing bytes to crash the client. | ||||
| CVE-2026-98816 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overflow of jump offset in constant blinding bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into: AX = imm ^ rnd AX ^= rnd if rX op AX goto off and subtracts 2 from off when the jump is backward. off is s16, so -32767 and -32768 wrap and the jump goes 32767 insns forward, past the end of the prog. The jump is inside the patch, hence bpf_adj_branches() doesn't check it. The kernel crashes when such prog runs with bpf_jit_harden=2. Return -ERANGE in such case. bpf_jit_blind_constants() fails the same way when blinding of other insns moves a jump out of range. | ||||
| CVE-2026-46471 | 2026-10-19 | 5.5 Medium | ||
| An issue was discovered in GStreamer gst-plugins-good before 1.28.2. While parsing an MP4 file, the isomp4 plugin's qtdemux_parse_uuid function may read past the end of a heap-allocated buffer, allowing an attacker to disclose heap memory contents. | ||||
| CVE-2026-98868 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject a kset that overruns its segment cache_replay(), the writeback worker and the GC worker read a kset of get_kset_onmedia_size() bytes and advance the position by it. A forged key_num makes that size exceed the segment's remaining space, so the advance walks past the segment and trips the cache_pos_advance() BUG_ON. Reject a kset whose on-media size exceeds cache_seg_remain() before use. | ||||
| CVE-2026-98434 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions") incorrectly removed. | ||||
| CVE-2026-98828 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: reject short WMI command responses ath9k_wmi_rsp_callback() removes the validated WMI header and copies the number of bytes expected by the waiting command into its response buffer. A device response shorter than that expectation can therefore be read beyond the skb payload. Record -EMSGSIZE for a short response, complete the waiter, and return the stored status from the command path. This also prevents callers from consuming stale response bytes as a successful reply. | ||||
| CVE-2026-98803 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | ||||
| CVE-2026-98731 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the "skb->len < plen" check and letting skb_trim() truncate the packet. Widen plen to u32 so the addition cannot wrap. | ||||
| CVE-2026-98730 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_frame() eventually copies skb->data into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended. A user-space process with HCI_CHANNEL_USER access can inject an oversized packet and overflow the buffer. Reject packets larger than BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry. | ||||
| CVE-2026-98675 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned. | ||||
| CVE-2026-98626 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Restrict CO-RE poisoning to relocatable instructions CO-RE relocation records can name any instruction offset. When a relocation cannot be resolved, bpf_core_patch_insn() currently poisons its target before checking whether that instruction is a valid relocation target. Malformed metadata can therefore replace jumps, calls, exits, register-source arithmetic, or non-immediate loads instead of failing at the relocation step. Handle poisoning only after the instruction has passed the same class and operand-form checks used for a resolved relocation. Route invalid forms through the existing diagnostic and return a hard error. Keep poisoning supported instructions, including both halves of a plain ldimm64, so an unresolved relocation in dead code remains valid. Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return its status directly from each validated instruction case. This avoids routing the success path through a common label and leaves the helper free to report errors. The shared relocation code applies this restriction to both libbpf and in-kernel CO-RE. | ||||
| CVE-2026-98611 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check params size before reading reserved fields bpf_crypto_ctx_create() is a kfunc whose second argument is declared with the __sz annotation, so the verifier only guarantees that params__sz bytes of params are valid. The function nevertheless reads params->reserved[0] and params->reserved[1] (offsets 14 and 15) before comparing params__sz against the size of struct bpf_crypto_params, so a BPF program can pass a shorter buffer and have the kernel read past the region that was validated for it. Move the size check in front of the reserved field reads. | ||||
| CVE-2026-98599 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject non-negative offsets in stack_slot_obj_get_spi() bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division, which truncates toward zero. For off == 0, this produces spi 0, the same index used by the valid stack slot at fp-8. stack_slot_obj_get_spi() currently checks alignment and the resulting spi bounds, but does not reject the non-negative offset itself. It can therefore validate a PTR_TO_STACK register holding fp+0 against an iterator stored at fp-8 even though the runtime receives the actual fp+0 pointer. An effectful iterator kfunc can then interpret memory outside the BPF stack as iterator state. Reject non-negative offsets before converting the offset to an spi. All valid stack objects begin at a negative offset from the frame pointer. | ||||
| CVE-2026-98597 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98590 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sock context code generation Currently, the ctx access code reads the rx_queue_mapping field with either a 4-byte or 2-byte load. The rest of the bits in the register are marked known zero by the verifier. However, the emitted ctx access code places in the register on certain the special value (-1) using BPF_MOV_IMM64, which gets sign-extended to turn on all the bits in the register. By shifting this value right, the program ends up with a value at runtime above what the verifier assumes is possible. Fix this by ensuring the read value is as wide as the assumed size. Use MOV32 instructions instead of MOV64 instructions to keep the upper bits zero as assumed by the verifier. Also properly report the size of the destination variable (the bpf_sock field, 4 bytes) instead of the source (the socket field, 2 bytes). | ||||
| CVE-2026-98575 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below. | ||||
| CVE-2026-98572 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||
| CVE-2026-98481 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: port100: reject frames whose declared length exceeds the received data port100_recv_response() passes the URB transfer buffer to port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen) bytes of frame->data. datalen is a 16-bit field supplied by the device and is never checked against the number of bytes actually received (urb->actual_length), so a device reporting a datalen larger than the received frame makes port100_data_checksum() read out of bounds past the transfer buffer. Reject a response whose declared frame size does not fit the received length before validating it. Found by 0sec (https://0sec.ai) using automated source analysis; the missing bound is evident from source. Compile-tested. | ||||
| CVE-2026-98461 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode. | ||||