| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A type mismatch vulnerability was found in QEMU's vhost inflight migration VMState handling. The destination buffer size is stored as a uint64_t but read by the VMS_VBUFFER load path as a signed int32_t. On little-endian hosts, a crafted incoming migration state with bit 31 set causes the value to be interpreted as negative and then implicitly converted to a very large size_t, leading qemu_get_buffer() to copy migration-stream data beyond the bounds of the mmap-backed inflight region.
This can result in a crash of the QEMU process or memory corruption. Exploitation requires control of the migration producer or write access to the migration channel, combined with a destination configured to use vhost inflight migration. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, ws_read_frame() decoded a WebSocket frame's 64-bit extended payload length with a 32-bit byte swap and narrowed the result into a signed length. A value whose surviving low word became negative bypassed the signed size check and was reinterpreted as an enormous unsigned count, causing client bytes to overwrite memory beyond the 64 KiB receive buffer. Any client completing a /socket WebSocket upgrade on an enabled mod_xml_rpc endpoint reached the parser before HTTP authentication; both the module and WebSocket endpoint are disabled by default. The heap overwrite can corrupt connection pointers and crash FreeSWITCH, ending every concurrent session, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| A flaw was found in Undertow, an HTTP server, within its HTTP response header writing path. The `writeString()` method performs a silent narrowing cast from 16-bit Unicode characters to 8-bit bytes when writing HTTP response header values. A remote attacker can exploit this by supplying specific Unicode characters in user-controlled input that an application places into response headers. This can lead to the truncation of these characters into ASCII control characters or special symbols, potentially resulting in limited integrity impact or information disclosure if the application does not properly sanitize user input. |
| In the Samsung Exynos H-Arx DRM plugin, improper input validation during buffer operations can cause memory corruption, potentially leading to denial of service or privilege escalation. |
| Tesseract is an open source OCR engine. Prior to 5.5.4, GENERIC_2D_ARRAY::DeSerializeSize in src/ccstruct/matrix.h reads matrix dimensions as signed int32_t values and compares them only with UINT16_MAX, allowing negative values to reach ResizeNoInit. Negative dimensions or a 65535 by 65535 product can create inconsistent allocation state and later out-of-bounds accesses while loading a crafted traineddata file, causing denial of service. This issue is fixed in version 5.5.4. |
| An integer truncation vulnerability in the QTextCodec conversion functions of the Qt 5 Core Compatibility APIs module impacts the Qt Framework. An application using the affected functionality could crash. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb->len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transport header inside the
Ethernet header.
Such skbs are not exotic:
- At the time of commit d0c081b49137 ("flow_dissector: properly cap
thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO
skbs larger than 64KB (MTU checks are skipped for GSO, and
alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0
pages on top of the linear part).
- BIG TCP now makes skbs larger than 64KB common.
- The following patch makes tun_get_user() dissect IFF_TAP frames
before eth_type_trans() pulls the Ethernet header, so a GSO frame
carrying a 65522..65535 byte L3 packet will be dissected with
skb->len in [65536, 65549].
Compare as u32 instead. If the resulting offset cannot be represented
in the u16 key_control->thoff, cap it to U16_MAX and report the
dissection as failed rather than silently returning a wrong transport
offset. thoff is still set on failure, as some callers (such as
eth_get_headlen()) use it regardless of the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject >8 byte return values on return-reading trampoline paths
btf_distill_func_proto() builds the function model used for the
fentry/fexit/fmod_ret/fsession trampolines and struct_ops. It has
accepted a 16-byte __int128 return value since the trampoline was
introduced: __get_type_size() returns the integer's type size, and the
return-type check only rejected ret < 0.
But the BPF trampoline preserves only 8 bytes of the return value (RAX on
x86, i.e. R0). For an attach type that reads the target's return value the
second half (RDX / R3) is neither saved nor restored, so a program
attached to a function returning a 16-byte value corrupts the value seen
by the real caller and itself observes only half of it. struct_ops
trampolines have the same limitation.
This affects the attach types that read the target's return value: fexit,
fmod_ret and fsession (plus the _multi variants of fexit and fsession),
and struct_ops. fentry/fentry_multi run before the target returns and are
unaffected.
Reject a >8 byte return value for these attach types in
bpf_check_attach_target() and bpf_check_attach_btf_id_multi(), and for
struct_ops in bpf_struct_ops_desc_init(). |
| Unspecified vulnerability in the Java SE and Java SE Embedded components in Oracle Java SE 6u105, 7u91, and 8u66 and Java SE Embedded 8u65 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to 2D. |
| Unspecified vulnerability in Oracle Java SE 6u101, 7u85, and 8u60, and Java SE Embedded 8u51, allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Libraries. |
| An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption. |
| An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation. |
| An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the 'num' parameter results in a signed comparison vulnerability. If an attacker underflows the 'num' parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data. |
| lookupName in resolve.c in SQLite 3.30.1 omits bits from the colUsed bitmask in the case of a generated column, which allows attackers to cause a denial of service or possibly have unspecified other impact. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation
ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and
ha->max_qpairs are u8. Deriving the queue count as
"ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board
(or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X
vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X
count of 1 zeroes it as well, and in target mode the subsequent
"ha->max_req_queues--" then underflows 0 to 255.
When the count is 0, qla2x00_alloc_queues() calls
kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is
not NULL, so the allocation check passes and the following
"ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory
or crashing the kernel.
Add qla_calc_queue_count() to clamp the derived value into
[1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and
use it at all three derivation sites (qla25xx_iospace_config(),
qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the
target-mode decrement so it cannot reintroduce a zero (which would in
turn underflow max_qpairs). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf()
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
