| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A logic vulnerability was found in GStreamer's webrtcbin component. The _check_sdp_crypto() function contains an inverted boolean condition that causes it to accept remote SDP offers or answers that lack the required a=fingerprint attribute, while incorrectly rejecting those that include it. An attacker with the ability to intercept and modify WebRTC signaling messages could exploit this to bypass the SDP-level DTLS certificate fingerprint binding, weakening defenses against man-in-the-middle attacks on media streams. |
| Vyper from 0.1.0b10 before 0.2.3 generates incorrect code for a return statement inside a for loop in an internal function called two or more internal calls deep, producing an invalid jump destination (stack underflow). Affected contracts revert such calls unnecessarily, which in limited circumstances could enable denial of service against public contracts. |
| Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. |
| The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was ((length/hop/source/target checks) && (icmp_hdr->code != 0)). Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated length is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet. |
| Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat's rewrite valve meant that if the first condition in an OR chain matched, subsequent non-OR conditions were skipped.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Nest is a framework for building scalable Node.js server-side applications. In versions 11.1.15 and below, a NestJS application using @nestjs/platform-fastify GET middleware can be bypassed because Fastify automatically redirects HEAD requests to the corresponding GET handlers (if they exist). As a result: middleware will be completely skipped, the HTTP response won't include a body (since the response is truncated when redirecting a HEAD request to a GET handler), and the actual handler will still be executed. This issue is fixed in version 11.1.16. |
| A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. |
| An elevation of privilege vulnerability in the kernel Qualcomm power driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Critical due to the possibility of a local permanent device compromise, which may require reflashing the operating system to repair the device. Product: Android. Versions: N/A. Android ID: A-35392981. References: QC-CR#826589. |
| An electromagnetic-wave side-channel issue was discovered on NXP SmartMX / P5x security microcontrollers and A7x secure authentication microcontrollers, with CryptoLib through v2.9. It allows attackers to extract the ECDSA private key after extensive physical access (and consequently produce a clone). This was demonstrated on the Google Titan Security Key, based on an NXP A7005a chip. Other FIDO U2F security keys are also impacted (Yubico YubiKey Neo and Feitian K9, K13, K21, and K40) as well as several NXP JavaCard smartcards (J3A081, J2A081, J3A041, J3D145_M59, J2D145_M59, J3D120_M60, J3D082_M60, J2D120_M60, J2D082_M60, J3D081_M59, J2D081_M59, J3D081_M61, J2D081_M61, J3D081_M59_DF, J3D081_M61_DF, J3E081_M64, J3E081_M66, J2E081_M64, J3E041_M66, J3E016_M66, J3E016_M64, J3E041_M64, J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, J2E082_M65, J3E081_M64_DF, J3E081_M66_DF, J3E041_M66_DF, J3E016_M66_DF, J3E041_M64_DF, and J3E016_M64_DF). |
| magento-scripts contains scripts and configuration used by Create Magento App, a zero-configuration tool-chain which allows one to deploy Magento 2. In versions 1.5.1 and 1.5.2, after changing the function from synchronous to asynchronous there wasn't implemented handler in the start, stop, exec, and logs commands, effectively making them unusable. Version 1.5.3 contains patches for the problems. |
| In updateCapabilities of ConnectivityService.java, there is a possible incorrect network state determination due to a logic error in the code. This could lead to biasing of networking tasks to occur on non-VPN networks, which could lead to remote information disclosure, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-179053823 |
| An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001. |
| An issue was discovered in includes/head.inc.php in rConfig before 3.9.4. An unauthenticated attacker can retrieve saved cleartext credentials via a GET request to settings.php. Because the application was not exiting after a redirect is applied, the rest of the page still executed, resulting in the disclosure of cleartext credentials in the response. |
| Signal Private Messenger Android v4.59.0 and up and iOS v3.8.1.5 and up allows a remote non-contact to ring a victim's Signal phone and disclose currently used DNS server due to ICE Candidate handling before call is answered or declined. |
| A logic issue was addressed with improved restrictions. This issue is fixed in iOS 13.4 and iPadOS 13.4, tvOS 13.4, Safari 13.1, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. A file URL may be incorrectly processed. |
| A vulnerability in the Session Initiation Protocol (SIP) of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect handling of incoming SIP traffic. An attacker could exploit this vulnerability by sending a series of SIP packets to an affected device. A successful exploit could allow the attacker to exhaust memory on an affected device, causing it to crash and leading to a DoS condition. |
| Leptonica before 1.80.0 allows a denial of service (application crash) via an incorrect left shift in pixConvert2To8 in pixconv.c. |
| MediaWiki before 1.35.1 blocks legitimate attempts to hide log entries in some situations. If one sets MediaWiki:Mainpage to Special:MyLanguage/Main Page, visits a log entry on Special:Log, and toggles the "Change visibility of selected log entries" checkbox (or a tags checkbox) next to it, there is a redirection to the main page's action=historysubmit (instead of the desired behavior in which a revision-deletion form appears). |
| An Authorization Bypass vulnerability in the Marmind web application with version 4.1.141.0 allows users with lower privileges to gain control to files uploaded by administrative users. The accessed files were not visible by the low privileged users in the web GUI. |
