| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-blkback: Avoid UAF when reading I/O statistics
Reading I/O statistics via sysfs concurrently with tearing down a
frontend device might result in UAF or a NULL dereference, as the
reading of the statistics data is not synchronized with freeing the
data.
Use a rwlock for synchronizing.
This is XSA-528 / CVE-2026-100082 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix UAF when reading statistics data
The network statistic data in the driver is protected by RCU.
Unfortunately when tearing down the queues after an error during
connecting to the frontend (e.g. due to illegal Xenstore data filled
in by the guest), the statistic data is being freed without
synchronizing the RCU state. In case the data is being read via sysfs
in this phase, access to already freed memory or memory being in new
use is possible.
Fix that by calling synchronize_net() before freeing the queue data.
This is XSA-526 / CVE-2026-100080 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| CivetWeb through 1.16, when built with USE_HTTP2 and enable_http2 on, contains a use-after-free vulnerability in handle_http2() that retains freed :method and :path pointers. Unauthenticated remote attackers can send a later HEADERS frame omitting these pseudo-headers to influence request method or path seen by access rules, or crash the server. |
| The vulnerability is a Use-After-Free (UAF) in the EVS AIDL HAL, arising from a data race on an unsynchronized `std::weak_ptr` within `EvsEnumerator::openCamera()`. Specifically, concurrent calls from a privileged UID (e.g., `AID_AUTOMOTIVE_EVS`) can cause a torn `weak_ptr` state, leading to a virtual call through a freed object's vtable at `cameraObj->getCameraInfo(&desc)`. This allows for potential arbitrary code execution within the `hal_evs_default` process. |
| A flaw was found in libarchive. An attacker can cause a Denial of Service (DoS) or potential information disclosure due to a use-after-free vulnerability, which occurs when a program reads memory that has already been released. This issue arises when the archive_entry_copy_mac_metadata() function deallocates an internal buffer before completing a data copy. An attacker who can supply input to an application utilizing this function can trigger the flaw to crash the application or read uninitialized memory data. |
| A vulnerability was found in libssh, where an uninitialized variable exists under certain conditions in the privatekey_from_file() function. This flaw can be triggered if the file specified by the filename doesn't exist and may lead to possible signing failures or heap corruption. |
| A flaw was found in OpenSSL's handling of the properties argument in certain functions. This vulnerability can allow use-after-free exploitation, which may result in undefined behavior or incorrect property parsing, leading to OpenSSL treating the input as an empty string. |
| The use-after-free vulnerability was found in the AuthentIC driver in OpenSC packages, occuring in the card enrolment process using pkcs15-init when a user or administrator enrols or modifies cards. An attacker must have physical access to the computer system and requires a crafted USB device or smart card to present the system with specially crafted responses to the APDUs, which are considered high complexity and low severity. This manipulation can allow for compromised card management operations during enrolment. |
| A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service. |
| A use-after-free flaw was found in PackageKitd. In some conditions, the order of cleanup mechanics for a transaction could be impacted. As a result, some memory access could occur on memory regions that were previously freed. Once freed, a memory region can be reused for other allocations and any previously stored data in this memory region is considered lost. |
| Multiple Use-After-Free vulnerabilities were found in the add_archive_element function in ld/ldmain.c of the GNU linker (ld), a component of binutils. The root cause is that plugin_maybe_claim() in ld/plugin.c frees the original BFD object via bfd_close/_bfd_delete_bfd when entry->the_bfd->my_archive == NULL, but the caller retains both the original abfd parameter and a shallow copy (orig_input.the_bfd) as dangling pointers. These dangling pointers are subsequently dereferenced at three distinct locations in add_archive_element:
1. Line ~1442: accessing abfd->my_archive via bfd_usrdata(abfd->my_archive)
2. Line ~1493: multiple accesses to abfd and abfd->my_archive in a conditional check and bfd_get_filename call
3. Line ~1525: dereferencing the shallow copy orig_input.the_bfd->my_archive in trace/verbose logging
The vulnerability is triggered when LTO plugins are active (link_info.lto_plugin_active is true) and the input object has abfd->my_archive == NULL, which is a valid state for standalone object files. Red Hat builds binutils with --enable-plugins and --enable-lto, confirming the vulnerable code path is compiled in and reachable.
An attacker who can supply a crafted object or archive file to a build process using LTO-enabled linking could exploit this flaw to cause a denial of service (linker crash via segmentation fault). Arbitrary code execution is theoretically possible through heap manipulation but is substantially mitigated by hardening measures including stack protector, FORTIFY_SOURCE, ASLR, and PIE.
The attack surface is limited to build-time environments — the linker is a development tool not exposed in production runtime. The most realistic exploitation scenario is a supply chain attack introducing a crafted object file as a build dependency in CI/CD pipelines or development environments. |
| A flaw was found in the libblkid library of util-linux. During nested partition probing, the BSD, Minix, Solaris x86, and UnixWare partition probers cache a raw pointer to a parent partition entry in a dynamically allocated array. When subsequent partition additions cause the array to be reallocated, this pointer becomes stale, leading to a heap use-after-free read. An attacker who can present a crafted block device image (for example, via USB insertion or a loop-mounted disk image) can trigger this flaw without user interaction, as libblkid is invoked automatically by udev/udisks as root on block-device hot-plug events. This could lead to limited information disclosure or denial of service. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause race condition in hardware performance counters buffer’s destruction path leading to read and/or write UAF.
The race condition in the destruction path could lead to reference counter being decremented in non-atomical way allowing other code paths using a freed object to read and/or write kernel heap memory. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to free memory in still in use, replace with another allocation and cause arbitrary memory reads or writes to physical memory pages.
A memory buffer managed by a CPU thread of control (driver) and accessed by a GPU thread of control (firmware) can be freed while in use. Software installed and run as a non-privileged user may replace that buffer with another and replace a shared resource (memory page address list) managed by the CPU thread of control (driver) leading to the GPU accessing memory not managed by the CPU thread of control (driver). |
| FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, peer_find_template() in src/netflow_plugin/netflow_collector.cpp and src/netflow_plugin/netflow_v9_collector.cpp returns a pointer into global_netflow9_templates after releasing the cache mutex. On deployments with at least two entries in netflow_ports, concurrent template redefinition and data-flowset processing can let add_update_peer_template() reassign the template and free its records vector while another listener dereferences the escaped pointer. An unauthenticated sender that can reach both NetFlow/IPFIX listener ports can trigger a heap-use-after-free and reliably crash FastNetMon. No fixed release is available as of this review. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix cached_dev.sb_bio use-after-free and crash
In our production environment, we have received multiple crash reports
regarding libceph, which have caught our attention:
```
[6888366.280350] Call Trace:
[6888366.280452] blk_update_request+0x14e/0x370
[6888366.280561] blk_mq_end_request+0x1a/0x130
[6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd]
[6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd]
[6888366.280903] __complete_request+0x22/0x70 [libceph]
[6888366.281032] osd_dispatch+0x15e/0xb40 [libceph]
[6888366.281164] ? inet_recvmsg+0x5b/0xd0
[6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph]
[6888366.281405] ceph_con_process_message+0x79/0x140 [libceph]
[6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph]
[6888366.281661] ceph_con_workfn+0x329/0x680 [libceph]
```
After analyzing the coredump file, we found that the address of
dc->sb_bio has been freed. We know that cached_dev is only freed when it
is stopped.
Since sb_bio is a part of struct cached_dev, rather than an alloc every
time. If the device is stopped while writing to the superblock, the
released address will be accessed at endio.
This patch hopes to wait for sb_write to complete in cached_dev_free.
It should be noted that we analyzed the cause of the problem, then tell
all details to the QWEN and adopted the modifications it made. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
cxl_detach_ep() is called during bottom-up removal when all CXL memory
devices beneath a switch port have been removed. For each port in the
hierarchy it locks both the port and its parent, removes the endpoint,
and if the port is now empty, marks it dead and unregisters the port
by calling delete_switch_port(). There are two places during this work
where the parent_port may be used after freeing:
First, a concurrent detach may have already processed a port by the
time a second worker finds it via bus_find_device(). Without pinning
parent_port, it may already be freed when we discover port->dead and
attempt to unlock the parent_port. In a production kernel that's a
silent memory corruption, with lock debug, it looks like this:
[]DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current())
[]WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310
[]Call Trace:
[]mutex_unlock+0xd/0x20
[]cxl_detach_ep+0x180/0x400 [cxl_core]
[]devm_action_release+0x10/0x20
[]devres_release_all+0xa8/0xe0
[]device_unbind_cleanup+0xd/0xa0
[]really_probe+0x1a6/0x3e0
Second, delete_switch_port() releases three devm actions registered
against parent_port. The last of those is unregister_port() and it
calls device_unregister() on the child port, which can cascade. If
parent_port is now also empty the device core may unregister and free
it too. So by the time delete_switch_port() returns, parent_port may
be free, and the subsequent device_unlock(&parent_port->dev) operates
on freed memory. The kernel log looks same as above, with a different
offset in cxl_detach_ep().
Both of these issues stem from the absence of a lifetime guarantee
between a child port and its parent port.
Establish a lifetime rule for ports: child ports hold a reference to
their parent device until release. Take the reference when the port
is allocated and drop it when released. This ensures the parent is
valid for the full lifetime of the child and eliminates the use after
free window in cxl_detach_ep().
This is easily reproduced with a reload of cxl_acpi in QEMU with CXL
devices present. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: platform: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260 |
