Search
Search Results (13 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-4426 | 2 Libarchive, Redhat | 8 Libarchive, Enterprise Linux, Hardened Images and 5 more | 2026-11-06 | 6.5 Medium |
| A flaw was found in libarchive. An Undefined Behavior vulnerability exists in the zisofs decompression logic, caused by improper validation of a field (`pz_log2_bs`) read from ISO9660 Rock Ridge extensions. A remote attacker can exploit this by supplying a specially crafted ISO file. This can lead to incorrect memory allocation and potential application crashes, resulting in a denial-of-service (DoS) condition. | ||||
| CVE-2025-71305 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/display/dp_mst: Add protection against 0 vcpi When releasing a timeslot there is a slight chance we may end up with the wrong payload mask due to overflow if the delayed_destroy_work ends up coming into play after a DP 2.1 monitor gets disconnected which causes vcpi to become 0 then we try to make the payload = ~BIT(vcpi - 1) which is a negative shift. VCPI id should never really be 0 hence skip changing the payload mask if VCPI is 0. Otherwise it leads to <7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc [drm_display_helper]] port ffff888126ce9000 (3) <4> [515.287267] -----------[ cut here ]----------- <3> [515.287268] UBSAN: shift-out-of-bounds in ../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36 <3> [515.287271] shift exponent -1 is negative <4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary) <4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER <4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 1645 03/15/2024 <4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work [drm_display_helper] <4> [515.287303] Call Trace: <4> [515.287304] <TASK> <4> [515.287306] dump_stack_lvl+0xc1/0xf0 <4> [515.287313] dump_stack+0x10/0x20 <4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0 <4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0 <4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d [drm_display_helper] <4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe] <4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0 <4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60 <4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe] <4> [515.287740] ? find_held_lock+0x31/0x90 <4> [515.287747] ? lock_release+0xce/0x2a0 <4> [515.287754] drm_atomic_check_only+0x6a2/0xb40 <4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140 <4> [515.287765] drm_atomic_commit+0x6e/0xf0 <4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10 <4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0 <4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0 <4> [515.287795] ? mutex_lock_nested+0x1b/0x30 <4> [515.287801] drm_client_modeset_commit+0x26/0x50 <4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110 <4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140 <4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0 <4> [515.287819] drm_client_hotplug+0x6c/0xf0 <4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0 <4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30 <4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410 [drm_display_helper] <4> [515.287861] process_one_work+0x22b/0x6f0 <4> [515.287874] worker_thread+0x1e8/0x3d0 <4> [515.287879] ? __pfx_worker_thread+0x10/0x10 <4> [515.287882] kthread+0x11c/0x250 <4> [515.287886] ? __pfx_kthread+0x10/0x10 <4> [515.287890] ret_from_fork+0x2d7/0x310 <4> [515.287894] ? __pfx_kthread+0x10/0x10 <4> [515.287897] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-64006 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix dst corruption in same register operation For lshift and rshift, the shift operations are performed in a loop over 32-bit words. The loop calculates the shifted value and write it to dst, and then immediately reads from src to calculate the carry for the next iteration. Because src and dst could point to the same memory location, the carry is incorrectly calculated using the newly modified dst value instead of the original src value. Adding a temporary local variable to cache the original value before writing to dst and using it for the carry calculation solves the problem. In addition, partial overlap is rejected from control plane for all kind of operations including byteorder. This was tested with the following bytecode: table test_table ip flags 0 use 1 handle 1 ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1 ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ] ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ] | ||||
| CVE-2026-72450 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72347 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_connmark: reject invalid shift parameters Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path. | ||||
| CVE-2026-46101 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: reject zero shift in nft_bitwise Reject zero shift operands for nft_bitwise left and right shift expressions during initialization. The carry propagation logic computes the carry from the adjacent 32-bit word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this into a 32-bit shift, which is undefined behaviour. Reject zero shift operands in the control plane, alongside the existing check for values greater than or equal to 32, so malformed rules never reach the packet path. | ||||
| CVE-2026-31624 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: clamp report_size in s32ton() to avoid undefined shift s32ton() shifts by n-1 where n is the field's report_size, a value that comes directly from a HID device. The HID parser bounds report_size only to <= 256, so a broken HID device can supply a report descriptor with a wide field that triggers shift exponents up to 256 on a 32-bit type when an output report is built via hid_output_field() or hid_set_field(). Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in hid_report_raw_event") added the same n > 32 clamp to the function snto32(), but s32ton() was never given the same fix as I guess syzbot hadn't figured out how to fuzz a device the same way. Fix this up by just clamping the max value of n, just like snto32() does. | ||||
| CVE-2026-74297 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. | ||||
| CVE-2026-72483 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. | ||||
| CVE-2026-64512 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Suppress UBSAN warning caused by field misuse The definition of reg->access_width changes depending on the reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses access_width to indicate the PCC region, which can result in a UBSAN if the value is greater than 4. For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming) Lets fix this by validating the region type, as well as whether access_width has a value. Then since we are returning bit_width directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting the size. | ||||
| CVE-2016-9842 | 8 Apple, Canonical, Debian and 5 more | 22 Iphone Os, Mac Os X, Tvos and 19 more | 2025-12-04 | 8.8 High |
| The inflateMark function in inflate.c in zlib 1.2.8 might allow context-dependent attackers to have unspecified impact via vectors involving left shifts of negative integers. | ||||
| CVE-2025-46152 | 2 Linuxfoundation, Pytorch | 2 Pytorch, Pytorch | 2025-10-03 | 5.3 Medium |
| In PyTorch before 2.7.0, bitwise_right_shift produces incorrect output for certain out-of-bounds values of the "other" argument. | ||||
Page 1 of 1.