| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Erlang/OTP ssl application does not detect cycles when reconstructing an incomplete peer certificate chain during a TLS or DTLS handshake. In ssl_certificate:handle_incomplete_chain/5, the received chain is passed to ssl_certificate:build_certificate_chain/5, which walks issuer relationships via ssl_certificate:do_certificate_chain/7 with no cycle detection and no depth limit. When the peer supplies two mutually cross-signed certificates in unordered form (A issues B, B issues A), the issuer lookup alternates between the two certificates and the pair of functions recurses indefinitely, growing the call stack and chain accumulator without bound.
An unauthenticated remote attacker can send a crafted certificate chain in a TLS or DTLS Certificate handshake message to exhaust available memory and crash the BEAM node. Only a TCP connection and a partial handshake are required; no authentication or completed handshake is needed, and both TLS/DTLS servers and clients are affected when processing peer certificate messages.
This issue affects OTP from OTP 23.2 before OTP 27.3.4.15, OTP 28.5.0.4, and OTP 29.0.4, corresponding to ssl from 10.2 before 11.2.12.11, 11.6.0.4, and 11.7.4. |
| Allocation of resources without limits in Erlang/OTP public_key certificate path validation allows a remote unauthenticated attacker to cause denial of service by sending a crafted X.509 certificate chain during the TLS handshake.
During RFC 5280 policy processing in public_key:pkix_path_validation/3, the certificate policy tree maintained by pubkey_policy_tree grows without an upper bound. When a certificate chain contains M policies per certificate and K certificates, the tree grows on the order of M^K nodes because pubkey_policy_tree:add_leaves/2 and pubkey_policy_tree:add_leaf_siblings/2 extend the tree per policy per certificate. A modest chain with many policies per certificate is enough to pin BEAM schedulers and exhaust the node's memory, taking down the entire VM. The attacker only needs to be able to present a certificate chain to the victim, which is the normal precondition for a TLS handshake, so exploitation succeeds against any incoming or outgoing TLS connection that validates the peer's chain (the default for SSL/TLS clients and mutual-TLS servers).
This is the same vulnerability class as OpenSSL's X509_verify_cert policy tree DoS.
This vulnerability is associated with program files lib/public_key/src/pubkey_policy_tree.erl and program routines pubkey_policy_tree:add_leaves/2 and pubkey_policy_tree:add_leaf_siblings/2.
This issue affects OTP from OTP 26.2 before OTP 27.3.4.15, OTP 28.5.0.4, and OTP 29.0.4, corresponding to public_key from 1.15 before 1.17.1.5, 1.20.3.4, and 1.21.4. |
| Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. |
| Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication.
When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames.
The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability.
This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl.
This issue affects OTP from OTP 29.0 before OTP 29.0.2, corresponding to ssh from 6.0 before 6.0.1. |
| The Erlang/OTP httpc HTTP client does not enforce a limit on the total size of response headers received from a server. The max_header_size option defaults to nolimit, and httpc_response:parse_headers/6 accumulates every header into a list before the length check runs (which only fires after the terminating CRLF CRLF is received).
A malicious or compromised HTTP server can send an arbitrarily large number of headers, or headers with very large values, causing the client process to allocate unbounded memory until the system runs out of memory or the BEAM VM crashes. A proof-of-concept server sending 100,000 headers of roughly 4000 bytes each caused the client VM to allocate over 13 GB of memory in under 30 seconds.
Any application using httpc:request/4,5 to connect to untrusted servers is affected. No authentication is required: any server the client connects to (including via a redirect or man-in-the-middle) can trigger the exhaustion.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP stdlib allows a remote attacker to degrade availability by supplying a URI whose port component is a very long run of digits.
uri_string:get_port/1 passes the port substring to binary_to_integer/1 with no length bound, catching only error:badarg, so a syntactically valid port of up to roughly 1.26 million digits converts successfully and costs the calling process hundreds of milliseconds of arbitrary-precision arithmetic. The conversion is reached from every authority-parsing path in uri_string:parse/1, including the host, registered-name, and IPv4 and IPv6 forms. parse/1 is the documented interface for parsing URIs, so any application that parses an attacker-supplied URI is exposed without further configuration. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 21.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to stdlib from 3.5 before 6.2.2.5, 7.3.0.2, and 8.0.4. |
| httpd has never implemented obs-fold (RFC 2616 §2.2 / RFC 7230 §3.2.4 header continuation lines). Every CRLF followed by a non-CRLF octet unconditionally starts a new header. This missing feature became a security concern as the understanding of HTTP request smuggling attacks evolved.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, 5.20.2.2, and 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending valid request headers with a large Content-Length and then stalling before the body is complete.
httpd_request_handler:handle_info/2 cancels the request timeout as soon as a parse step succeeds, which includes the headers, and the clause that handles a decoder asking for more data re-arms the socket with {active, once} without setting any further timer. httpd_request:whole_body/2 returns such a continuation whenever the bytes received are fewer than the announced Content-Length, so a well-formed request that stops mid-body leaves the worker waiting indefinitely. The periodic byte-rate check that would reclaim it is armed only when minimum_bytes_per_second is configured, which it is not by default. Repeating this across connections occupies every worker permitted by max_clients and denies service to legitimate clients at negligible bandwidth cost.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| httpd function check_header/3 rejects duplicate Content-Length (per CVE-2026-23941) but never checks for the TE+CL co-presence that RFC 9112 §6.3 identifies as a probable smuggling attempt. handle_body/3 frames by chunked and silently discards Content-Length. A CL-preferring front-end paired with chunked-preferring inets creates a classic CL.TE front-end/back-end desync.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP inets httpc allows a malicious or compromised HTTP server to degrade availability by returning a numeric header whose value is a very long run of digits.
httpc_handler.erl converts the server-supplied Content-Length with list_to_integer/1 before comparing it against max_body_size, so the size check cannot protect the conversion, and the option defaults to nolimit in any case. The same unbounded conversion appears in httpc_response:format_response/1 for Content-Length and in httpc_response:get_ms_from_retry_after/1 for Retry-After, which is guarded only by a check that the first character is a digit. A value of up to roughly 1.26 million digits converts successfully and costs the requesting process hundreds of milliseconds of arbitrary-precision arithmetic per response. The conversion function is documented to accept integers of any size, so bounding the input is the caller's responsibility.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| The mod_auth module in OTP's inets httpd server, when configured with dets or mnesia authentication backends and multiple directory configuration blocks, collapses all directory blocks into a single shared user/group namespace. A user added to one protected directory is accepted as valid for all other protected directories on the same server instance.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, 9.6.2.3, and 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.
This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, 16.4.0.6, and 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown. |
| Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP ssh allows an authenticated remote attacker to exhaust node memory by repeatedly opening session channels that are never assigned a handler.
The "session" clause of ssh_connection:handle_msg/4 checks only minimal_remote_max_packet_size before calling setup_session/5, which unconditionally builds a #channel{} record and stores it in the ETS channel cache. The max_channels daemon option is consulted only by ssh_channel_sup:max_num_channels_not_exceeded/2, which counts supervisor children, so a channel that never gets a shell, exec, or subsystem handler is invisible to the limit and setting the option to a finite value does not mitigate the attack. RFC 4254 section 5.1 permits many session channels per connection, and each record costs only a few hundred bytes, so a single authenticated connection can accumulate channels until the node runs out of memory and the emulator terminates, affecting every application on it. No file contents, credentials, or write access are obtainable.
This issue affects OTP from OTP 18.1.2 before OTP 27.3.4.18, OTP 28.5.0.7, and OTP 29.1.1, corresponding to ssh from 4.1.1 before 5.2.11.13, 5.5.2.6, and 6.0.6. Whether OTP before OTP 18.1.2, corresponding to ssh before 4.1.1, is affected is unknown. |
| Inefficient algorithmic complexity in the Erlang/OTP asn1 OBJECT IDENTIFIER decoder allows a remote unauthenticated attacker to cause denial of service by sending a crafted OID during the TLS handshake.
The BER OID decoder asn1rtt_ber:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_ber.erl and the equivalent PER helper asn1rtt_per_common:dec_subidentifiers/3 in lib/asn1/src/asn1rtt_per_common.erl accumulate a base-128 subidentifier into an unbounded integer using (Av bsl 7) + H per continuation byte. Each shift and addition on the growing accumulator is linear in the number of bits already accumulated, giving quadratic total work in the size of a single subidentifier. The JER helper asn1rtt_jer:json2oid/1 in lib/asn1/src/asn1rtt_jer.erl exhibits the same class of unbounded-integer parsing when decoding a dot-separated OID from JSON. A DER-encoded OBJECT IDENTIFIER with one very large arc (approximately 262 KB of continuation bytes) consumes roughly 13 seconds of CPU on typical hardware.
The vulnerable decoder is generated into every ASN.1 module that contains an OBJECT IDENTIFIER, including OTP-PUB-KEY which is reached during X.509 certificate parsing via public_key:pkix_decode_cert/2. This decoder runs before any signature or trust chain verification, so any Erlang service that parses peer TLS certificates is exposed: the default for TLS clients (which always parse the server certificate) and for mutual-TLS servers (which parse client certificates).
This vulnerability is associated with program files lib/asn1/src/asn1rtt_ber.erl, lib/asn1/src/asn1rtt_per_common.erl and lib/asn1/src/asn1rtt_jer.erl and program routines asn1rtt_ber:dec_subidentifiers/3, asn1rtt_per_common:dec_subidentifiers/3 and asn1rtt_jer:json2oid/1.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.18, OTP 28.5.0.7, and OTP 29.1.1, corresponding to asn1 from 3.0 before 5.3.4.3, 5.4.3.1, and 5.5.2. Whether OTP before OTP 17.0, corresponding to asn1 before 3.0, is affected is unknown. |
| Missing Release of Resource after Effective Lifetime vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by sending a request with a chunked body whose chunk-size line is not a hexadecimal number. The worker serving the connection is never released and no timeout reclaims it, so repeating the request across connections occupies every available worker and denies service to legitimate clients. No authentication is required and the default configuration is affected.
The chunk-size line must arrive in a write separate from the headers. When the body accompanies the headers, httpd_request_handler:handle_body/3 calls http_chunk:decode/3 inside a try ... catch throw:Error, so the {error, {chunk_size, _}} thrown by http_chunk:decode_size/4 is answered with 400 Bad Request. When the chunk size arrives later, the decoder is resumed through a bare catch in httpd_request_handler:handle_info/2, which converts the throw into a return value rather than raising it; the resulting error tuple is then treated as the next decoder continuation, the socket is re-armed, and the worker waits for data that never comes. The request timeout has already been cancelled at the point the headers were accepted, and the periodic byte-rate check is only armed when minimum_bytes_per_second is configured, which it is not by default.
This issue affects OTP from OTP 18.1.4 before OTP 27.3.4.17, OTP 28.5.0.6, and OTP 29.0.6, corresponding to inets from 6.0.3 before 9.3.2.7, 9.6.2.3, and 9.7.2. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Erlang OTP (ssh_sftpd module) allows Path Traversal.
This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routines ssh_sftpd:is_within_root/2.
The SFTP server uses string prefix matching via lists:prefix/2 rather than proper path component validation when checking if a path is within the configured root directory. This allows authenticated users to access sibling directories that share a common name prefix with the configured root directory. For example, if root is set to /home/user1, paths like /home/user10 or /home/user1_backup would incorrectly be considered within the root.
This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14. |
| Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion.
The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS.
Two compression algorithms are affected:
* zlib: Activates immediately after key exchange, enabling unauthenticated attacks
* zlib@openssh.com: Activates post-authentication, enabling authenticated attacks
Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments.
This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4.
This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14. |
