Search

Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Search Examples

CVEs in KEV CVEs with EPSS >= 80% Crit. Microsoft High Apache SQL Injection (CWE-89) Linux Kernel High (CVSS 3.1) Apache Struts RCE (Remote Code Execution) XSS (CWE-79) Critical (CVSS 4.0) CVEs to check

Search Results (19 CVEs found)

Export CSV
CVE Vendors Products Updated CVSS v3.1
CVE-2025-60674 1 Dlink 2 Dir-878, Dir-878 Firmware 2025-11-17 6.8 Medium
A stack buffer overflow vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin in the rc binary's USB storage handling module. The vulnerability occurs when the "Serial Number" field from a USB device is read via sscanf into a 64-byte stack buffer, while fgets reads up to 127 bytes, causing a stack overflow. An attacker with physical access or control over a USB device can exploit this vulnerability to potentially execute arbitrary code on the device.
CVE-2025-60672 1 Dlink 2 Dir-878, Dir-878 Firmware 2025-11-17 6.5 Medium
An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDynamicDNSSettings' functionality, where the 'ServerAddress' and 'Hostname' parameters in prog.cgi are stored in NVRAM and later used by rc to construct system commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.
CVE-2025-60673 2 D-link, Dlink 4 Dir-878, Dir-878 Firmware, Dir-878 and 1 more 2025-11-17 6.5 Medium
An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDMZSettings' functionality, where the 'IPAddress' parameter in prog.cgi is stored in NVRAM and later used by librcm.so to construct iptables commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.
CVE-2022-43184 1 Dlink 2 Dir-878, Dir-878 Firmware 2025-05-08 9.8 Critical
D-Link DIR878 1.30B08 Hotfix_04 was discovered to contain a command injection vulnerability via the component /bin/proc.cgi.
CVE-2022-41140 1 Dlink 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more 2025-04-01 8.8 High
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of multiple D-Link routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the lighttpd service, which listens on TCP port 80 by default. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-13796.
CVE-2021-30072 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 9.8 Critical
An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication.
CVE-2020-8864 1 Dlink 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more 2024-11-21 8.8 High
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of empty passwords. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9471.
CVE-2020-8863 1 Dlink 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more 2024-11-21 8.8 High
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470.
CVE-2020-15633 2 D-link, Dlink 6 Dir-867 Firmware, Dir-878 Firmware, Dir-882 Firmware and 3 more 2024-11-21 8.8 High
This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.20B10_BETA. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP requests. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-10835.
CVE-2019-9125 2 D-link, Dlink 2 Dir-878 Firmware, Dir-878 2024-11-21 N/A
An issue was discovered on D-Link DIR-878 1.12B01 devices. Because strncpy is misused, there is a stack-based buffer overflow vulnerability that does not require authentication via the HNAP_AUTH HTTP header.
CVE-2019-9124 2 D-link, Dlink 2 Dir-878 Firmware, Dir-878 2024-11-21 N/A
An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password.
CVE-2019-8319 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.
CVE-2019-8318 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.
CVE-2019-8317 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field.
CVE-2019-8316 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.
CVE-2019-8315 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.
CVE-2019-8314 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.
CVE-2019-8313 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.
CVE-2019-8312 1 Dlink 2 Dir-878, Dir-878 Firmware 2024-11-21 8.8 High
An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.