| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Denial of Service via OOM vulnerability in Apache ActiveMQ, ActiveMQ Broker.
An authenticated OpenWire client that sends a ConsumerInfo for a temporary queue/topic owned by another connection is rejected with InvalidDestinationException, but the rejected Subscription is left behind in the region's subscriptions map. Repeating the request leaks broker heap until OOM because the broker does not clean up the rejected subscriptions in the map.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; ActiveMQ Broker: from 6.0.0 before 6.3.3, before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3, or 5.19.12, which fixes the issue. |
| Input validation vulnerability in Apache ActiveMQ configured to use the LDAPAuthorizationMapPlugin allows an authenticated attacker to create or address a destination with a crafted name containing LDAP DN special characters (such as comma, plus, equals, backslash) can manipulate the LDAP search base used for ACL lookups.
This issue affects Apache ActiveMQ: from 6.3.0 before 6.3.3, from 5.19.0 before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3 or 5.19.12, which fixes the issue. |
| Improper input validation vulnerability in Apache ActiveMQ, Apache ActiveMQ KahaDB.
The ActiveMQ broker resolves connection, session and consumer state from ids that are user provided and in some scenarios does not validate that they ids are bound to that user. This allows an authenticated client to spoof another user's ids. This allows:
* an authenticated client consumes from another connection's temporary queue/topic by putting the victim's connection id in its own ConsumerId, bypassing the broker-side ownership check.
* a duplicate ConsumerId registration is only logged, after which the attacker's RemoveInfo or disconnect tears down the victim's live subscription
* a forged MessageAck for the victim's ConsumerId permanently deletes an in-flight, unacknowledged message.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.3.3, before 5.19.12; Apache ActiveMQ KahaDB: from 6.0.0 before 6.3.3, before 5.19.12.
Users are recommended to upgrade to version 6.4.0, 6.3.3, or 5.19.12, which fixes the issue. |
| Xstream API versions up to 1.4.6 and version 1.4.10, if the security framework has not been initialized, may allow a remote attacker to run arbitrary shell commands by manipulating the processed input stream when unmarshaling XML or any supported format. e.g. JSON. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to execute arbitrary code only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to occupy a thread that consumes maximum CPU time and will never return. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker to load and execute arbitrary code from a remote host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability where the processed stream at unmarshalling time contains type information to recreate the formerly written objects. XStream creates therefore new instances based on these type information. An attacker can manipulate the processed input stream and replace or inject objects, that result in a server-side forgery request. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is vulnerability which may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. No user is affected who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14. |
| Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ.
Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary
destination.
This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7, which fixes the issue. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console.
The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp.
A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure.
This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7.
Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. |
| The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password. |
| The Fileserver web application in Apache ActiveMQ 5.x before 5.14.0 allows remote attackers to upload and execute arbitrary files via an HTTP PUT followed by an HTTP MOVE request. |
| Integer Overflow or Wraparound vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ MQTT.
The fix for "CVE-2025-66168: MQTT control packet remaining length field is not properly validated" was only applied to 5.19.2 (and future 5.19.x) releases but was missed for all 6.0.0+ versions.
This issue affects Apache ActiveMQ: from 6.0.0 before 6.2.4; Apache ActiveMQ All: from 6.0.0 before 6.2.4; Apache ActiveMQ MQTT: from 6.0.0 before 6.2.4.
Users are recommended to upgrade to version 6.2.4 or a 5.19.x version starting with 5.19.2 or later (currently latest is 5.19.5), which fixes the issue. |
| A Deserialization of Untrusted Data vulnerability exists in the Apache ActiveMQ NMS AMQP Client.
This issue affects all versions of Apache ActiveMQ NMS AMQP up to and including 2.3.0, when establishing connections to untrusted AMQP servers. Malicious servers could exploit unbounded deserialization logic present in the client to craft responses that may lead to arbitrary code execution on the client side.
Although version 2.1.0 introduced a mechanism to restrict deserialization via allow/deny lists, the protection was found to be bypassable under certain conditions.
In line with Microsoft’s deprecation of binary serialization in .NET 9, the project is evaluating the removal of .NET binary serialization support from the NMS API entirely in future releases.
Mitigation and Recommendations:
Users are strongly encouraged to upgrade to version 2.4.0 or later, which resolves the issue. Additionally, projects depending on NMS-AMQP should migrate away from .NET binary serialization as part of a long-term hardening strategy. |
