| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: gso: fix ownership in __udp_gso_segment
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
The issue was caused by dput(upper) being called before
ovl_dentry_update_reval(), while upper->d_flags was still
accessed in ovl_dentry_remote().
Move dput(upper) after its last use to prevent use-after-free.
BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
ovl_link_up fs/overlayfs/copy_up.c:610 [inline]
ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170
ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223
ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136
vfs_rename+0xf84/0x20a0 fs/namei.c:4893
...
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, rem
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix oops when unload drivers paralleling
When unload hclge driver, it tries to disable sriov first for each
ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at
the time, because it removes all the ae_dev nodes, and it may cause
oops.
But we can't simply use hnae3_common_lock for this. Because in the
process flow of pci_disable_sriov(), it will trigger the remove flow
of VF, which will also take hnae3_common_lock.
To fixes it, introduce a new mutex to protect the unload process. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear acl_access/acl_default after releasing them
If getting acl_default fails, acl_access and acl_default will be released
simultaneously. However, acl_access will still retain a pointer pointing
to the released posix_acl, which will trigger a WARNING in
nfs3svc_release_getacl like this:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28
refcount_warn_saturate+0xb5/0x170
Modules linked in:
CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted
6.12.0-rc6-00079-g04ae226af01f-dirty #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb5/0x170
Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75
e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb
cd 0f b6 1d 8a3
RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380
RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56
R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001
R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0
FS: 0000000000000000(0000) GS:ffff88871ed00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0xb5/0x170
? __warn+0xa5/0x140
? refcount_warn_saturate+0xb5/0x170
? report_bug+0x1b1/0x1e0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? tick_nohz_tick_stopped+0x1e/0x40
? refcount_warn_saturate+0xb5/0x170
? refcount_warn_saturate+0xb5/0x170
nfs3svc_release_getacl+0xc9/0xe0
svc_process_common+0x5db/0xb60
? __pfx_svc_process_common+0x10/0x10
? __rcu_read_unlock+0x69/0xa0
? __pfx_nfsd_dispatch+0x10/0x10
? svc_xprt_received+0xa1/0x120
? xdr_init_decode+0x11d/0x190
svc_process+0x2a7/0x330
svc_handle_xprt+0x69d/0x940
svc_recv+0x180/0x2d0
nfsd+0x168/0x200
? __pfx_nfsd+0x10/0x10
kthread+0x1a2/0x1e0
? kthread+0xf4/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
Clear acl_access/acl_default after posix_acl_release is called to prevent
UAF from being triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU protection in ip6_default_advmss()
ip6_default_advmss() needs rcu protection to make
sure the net structure it reads does not disappear. |
| In the Linux kernel, the following vulnerability has been resolved:
ndisc: use RCU protection in ndisc_alloc_skb()
ndisc_alloc_skb() can be called without RTNL or RCU being held.
Add RCU protection to avoid possible UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: use RCU protection in __neigh_notify()
__neigh_notify() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: use RCU protection in ovs_vport_cmd_fill_info()
ovs_vport_cmd_fill_info() can be called without RTNL or RCU.
Use RCU protection and dev_net_rcu() to avoid potential UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
ndisc: extend RCU protection in ndisc_send_skb()
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: fix timer races against user threads
Rose timers only acquire the socket spinlock, without
checking if the socket is owned by one user thread.
Add a check and rearm the timers if needed.
BUG: KASAN: slab-use-after-free in rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
Read of size 2 at addr ffff88802f09b82a by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
rose_timer_expiry+0x31d/0x360 net/rose/rose_timer.c:174
call_timer_fn+0x187/0x650 kernel/time/timer.c:1793
expire_timers kernel/time/timer.c:1844 [inline]
__run_timers kernel/time/timer.c:2418 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2430
run_timer_base kernel/time/timer.c:2439 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2449
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period
io_eventfd_do_signal() is invoked from an RCU callback, but when
dropping the reference to the io_ev_fd, it calls io_eventfd_free()
directly if the refcount drops to zero. This isn't correct, as any
potential freeing of the io_ev_fd should be deferred another RCU grace
period.
Just call io_eventfd_put() rather than open-code the dec-and-test and
free, which will correctly defer it another RCU grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
pps: Fix a use-after-free
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837e6 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: avoid erroring out after sock_init_data() in packet_create()
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: inet: do not leave a dangling sk pointer in inet_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: bsg: Set bsg_queue to NULL after removal
Currently, this does not cause any issues, but I believe it is necessary to
set bsg_queue to NULL after removing it to prevent potential use-after-free
(UAF) access. |
