Export limit exceeded: 21564 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1015 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-22897 | 5 Haxx, Netapp, Oracle and 2 more | 30 Curl, Cloud Backup, H300e and 27 more | 2026-10-14 | 5.3 Medium |
| curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. | ||||
| CVE-2020-11655 | 7 Canonical, Debian, Netapp and 4 more | 18 Ubuntu Linux, Debian Linux, Ontap Select Deploy Administration Utility and 15 more | 2026-10-14 | 7.5 High |
| SQLite through 3.31.1 allows attackers to cause a denial of service (segmentation fault) via a malformed window-function query because the AggInfo object's initialization is mishandled. | ||||
| CVE-2019-19126 | 5 Canonical, Debian, Fedoraproject and 2 more | 6 Ubuntu Linux, Debian Linux, Fedora and 3 more | 2026-10-14 | 3.3 Low |
| On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program. | ||||
| CVE-2019-12904 | 2 Gnupg, Opensuse | 2 Libgcrypt, Leap | 2026-10-14 | 5.9 Medium |
| In Libgcrypt 1.8.4, the C implementation of AES is vulnerable to a flush-and-reload side-channel attack because physical addresses are available to other processes. (The C implementation is used on platforms where an assembly-language implementation is unavailable.) NOTE: the vendor's position is that the issue report cannot be validated because there is no description of an attack | ||||
| CVE-2021-21290 | 6 Debian, Netapp, Netty and 3 more | 27 Debian Linux, Active Iq Unified Manager, Cloud Secure Agent and 24 more | 2026-10-08 | 6.2 Medium |
| Netty is an open-source, asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In Netty before version 4.1.59.Final there is a vulnerability on Unix-like systems involving an insecure temp file. When netty's multipart decoders are used local information disclosure can occur via the local system temporary directory if temporary storing uploads on the disk is enabled. On unix-like systems, the temporary directory is shared between all user. As such, writing to this directory using APIs that do not explicitly set the file/directory permissions can lead to information disclosure. Of note, this does not impact modern MacOS Operating Systems. The method "File.createTempFile" on unix-like systems creates a random file, but, by default will create this file with the permissions "-rw-r--r--". Thus, if sensitive information is written to this file, other local users can read this information. This is the case in netty's "AbstractDiskHttpData" is vulnerable. This has been fixed in version 4.1.59.Final. As a workaround, one may specify your own "java.io.tmpdir" when you start the JVM or use "DefaultHttpDataFactory.setBaseDir(...)" to set the directory to something that is only readable by the current user. | ||||
| CVE-2021-34693 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-08 | 5.5 Medium |
| net/can/bcm.c in the Linux kernel through 5.12.10 allows local users to obtain sensitive information from kernel stack memory because parts of a data structure are uninitialized. | ||||
| CVE-2020-24511 | 4 Debian, Intel, Netapp and 1 more | 11 Debian Linux, Microcode, Fas\/aff Bios and 8 more | 2026-10-08 | 6.5 Medium |
| Improper isolation of shared resources in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2020-12769 | 5 Canonical, Debian, Linux and 2 more | 36 Ubuntu Linux, Debian Linux, Linux Kernel and 33 more | 2026-10-08 | 5.5 Medium |
| An issue was discovered in the Linux kernel before 5.4.17. drivers/spi/spi-dw.c allows attackers to cause a panic via concurrent calls to dw_spi_irq and dw_spi_transfer_one, aka CID-19b61392c5a8. | ||||
| CVE-2020-12357 | 3 Intel, Netapp, Siemens | 568 Bios, Core I3-l13g4, Core I5-l16g7 and 565 more | 2026-10-08 | 6.7 Medium |
| Improper initialization in the firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2019-14565 | 3 Intel, Linux, Microsoft | 3 Software Guard Extensions Sdk, Linux Kernel, Windows | 2026-10-08 | 7.8 High |
| Insufficient initialization in Intel(R) SGX SDK Windows versions 2.4.100.51291 and earlier, and Linux versions 2.6.100.51363 and earlier, may allow an authenticated user to enable information disclosure, escalation of privilege or denial of service via local access. | ||||
| CVE-2018-14647 | 6 Canonical, Debian, Fedoraproject and 3 more | 15 Ubuntu Linux, Debian Linux, Fedora and 12 more | 2026-10-07 | 7.5 High |
| Python's elementtree C accelerator failed to initialise Expat's hash salt during initialization. This could make it easy to conduct denial of service attacks against Expat by constructing an XML document that would cause pathological hash collisions in Expat's internal data structures, consuming large amounts CPU and RAM. The vulnerability exists in Python versions 3.7.0, 3.6.0 through 3.6.6, 3.5.0 through 3.5.6, 3.4.0 through 3.4.9, 2.7.0 through 2.7.15. | ||||
| CVE-2026-92502 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b/0x5d0 __writeback_inodes_wb+0x54/0x100 wb_writeback+0x1ac/0x320 wb_workfn+0x394/0x470 And followed by the warning: EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263: comm (sd-umount): data will be lost This issue is not reproduced every time, but frequently. The reproduction step is to create a VM with 8 CPUs, 16G memory and setup data=journal: sudo tune2fs -o journal_data /dev/vda1 Run fio: rm -f fiotest fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio --iodepth=256 --numjobs=8 --filename=fiotest --filesize=30G --group_reporting Reboot the VM, and check the console output from: virsh console testvm But there is no dirty inode, folio_clear_dirty_for_io clears PG_dirty but leaves tags PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE set which are only cleared by __folio_start_writeback. In data=journal mode, jbd2 checkpoints the journalled data to its final location and clears its own dirty flag without touching folio PG_dirty or xarray dirty flags. The commit f4a2b42e7891 ("ext4: fix stale xarray tags after writeback") fixes when PG_dirty is still set but there is no dirty page. Another case is PG_dirty is cleared, but PAGECACHE_TAG_DIRTY and PAGECACHE_TAG_TOWRITE is still set. In this case, writeback thread checks clean folio and skips it in mpage_prepare_extent_to_map: if (!folio_test_dirty(folio) || ... folio_unlcok(folio); continue And never reaches ext4_bio_write_folio where the commit f4a2b42e7891 clears the stale xarray tags. Print debug logs after the filesystem is remounted read-only: writepages RDONLY nrpages=2048 dirtytag=1 wbtag=0 towrite=1 sync=0 And all folios are actually clean: folio idx=3 dirty=0 wb=0 checked=0 dirtybuf=0 jbddirty=0 mapped=1 ... We need to clear the xarray stale tags for such clean folios by cycling them through writeback in the skip path, the same way f4a2b42e7891 does in ext4_bio_write_folio. | ||||
| CVE-2026-89849 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler. | ||||
| CVE-2026-89903 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and RESTORE_SOME() restores it only when returning to user mode; the context-switch path never writes it. Therefore the live $r21 at trampoline exit is already correct, and nothing inbetween can change it legitimately (kernel C code cannot write a global register variable). The same flaw existed even in the pre-rethook kretprobe trampoline since v6.3; it was carried over when rethook replaced it. Drop both the save and the restore here. Drop the restore is enough to solve the issue, and drop the save is to keep the code tidy and no need to clear it. | ||||
| CVE-2025-37802 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING" wait_event_timeout() will set the state of the current task to TASK_UNINTERRUPTIBLE, before doing the condition check. This means that ksmbd_durable_scavenger_alive() will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: do not call blocking ops when !TASK_RUNNING; state=2 set at [<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0 WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160 mutex lock is not needed in ksmbd_durable_scavenger_alive(). | ||||
| CVE-2026-80881 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix buffer head management in ocfs2_read_blocks() In ocfs2_read_blocks(), caller should't assume that buffer head returned by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops b_count from 1 to 0. If it is not so, buffer head remains on hold and likely to be returned by the next call to 'sb_getblk()' unchanged - that is, with BH_Uptodate bit set even if it has failed validation previously, thus allowing to insert that buffer head into OCFS2 metadata cache and submit it to upper layers. To avoid such a scenario, BH_Uptodate should be cleared immediately after 'validate()' callback has detected some data inconsistency. | ||||
| CVE-2026-80868 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: Allocate iomap inline_data using alloc_page This fixes a BUG reported in iomap_write_end_inline: iomap_inline_data_valid checks that the inline_data fits within a page. If the inline_data is allocated with kmemdup there's no guarantee that it's page-aligned, so the check sometimes fails. Allocate it with alloc_page to ensure it's page-aligned. | ||||
| CVE-2026-80647 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 | ||||
| CVE-2026-80626 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable. | ||||
| CVE-2020-1048 | 1 Microsoft | 18 Windows 10, Windows 10 1507, Windows 10 1607 and 15 more | 2026-08-19 | 7.8 High |
| An elevation of privilege vulnerability exists when the Windows Print Spooler service improperly allows arbitrary writing to the file system. An attacker who successfully exploited this vulnerability could run arbitrary code with elevated system privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. To exploit this vulnerability, an attacker would have to log on to an affected system and run a specially crafted script or application. The update addresses the vulnerability by correcting how the Windows Print Spooler Component writes to the file system. | ||||