| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush
nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop
replace without holding nh->lock, racing the unlocked IPv6 route
add/delete that mutate the list under nh->lock and free fib6_info
entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()):
BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
Read of size 8 at addr ffff888012953e18 by task exploit/146
nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
replace_nexthop (net/ipv4/nexthop.c:2610)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Unlike the other f6i_list walks, this one bumps each route's sernum via
fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock
around it would invert the established tb6_lock -> nh->lock order and
deadlock. As the only purpose is to invalidate cached dsts, bump the
IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead,
mirroring the rt_cache_flush() already done for IPv4 just above. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers.
This patch also disables BH when transmitting the skb to address a
possible migration to different CPU leading to imbalanced decrementation
of the recursion counters.
This is modeled after Florian Westphal's dev_xmit_recursion*() API
available since commit 97cdcf37b57e ("net: place xmit recursion in
softnet data") according to its current state in the tree. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: call _ntfs_bad_inode() when failing to rename
It is safe to call _ntfs_bad_inode on live inodes since:
commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.")
The WARN_ON was added when it wasn't safe by:
commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further
operations on the inconsistent inode. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release pages on atomic dio size mismatch
If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a
short bio, the REQ_ATOMIC size check rejects it before submission. The
old error path only dropped the bio reference, leaving any pages already
attached to the bio unreleased.
Release or unbounce the pages before falling through to out_put_bio on
this error path.
This bug was reported by sashiko:
https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject user command submission without a command BO
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix crash when destroying a suspended hardware context
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix NULL pointer dereference of mgmt_chann
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Weak authentication in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. |
| When a Gitea Actions run was inserted, older runs in the same workflow-level concurrency group were cancelled without checking whether the new run still needed approval. Because fork pull request runs are inserted under the base repository, a user who can open a pull request from a fork could cancel trusted in-progress runs that share a concurrency group with `cancel-in-progress` enabled, without approval and without running any code. On self-hosted runners this can interrupt deployments and leave partial state behind. |
| A improper validation of certificate with host mismatch vulnerability in Fortinet FortiOS 7.6.1 through 7.6.6, FortiProxy 7.6.2 through 7.6.6 may allow attacker to information disclosure via <insert attack vector here> |
| In the Linux kernel, the following vulnerability has been resolved:
quota: Fix race of dquot_scan_active() with quota deactivation
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it. |
| In the Linux kernel, the following vulnerability has been resolved:
ptrace: slightly saner 'get_dumpable()' logic
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate Rock Ridge CE continuation extent against volume size
rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE
record and passes it to sb_bread() without checking that the block
number is within the mounted ISO 9660 volume. commit e595447e177b
("[PATCH] rock.c: handle corrupted directories") added cont_offset
and cont_size rejection for the CE continuation but did not validate
the extent block number itself. commit f54e18f1b831 ("isofs: Fix
infinite looping over CE entries") later capped the CE chain length
at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.
With a crafted ISO mounted via udisks2 (desktop optical auto-mount)
or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at
an out-of-range block or at blocks belonging to an adjacent
filesystem on the same block device. sb_bread() on an out-of-range
block returns NULL cleanly via the block layer EIO path, so there
is no memory-safety violation. For in-range reads of adjacent-
filesystem data, the CE buffer is parsed as Rock Ridge records and
only the text of SL sub-records reaches userspace through
readlink(), which makes the info-leak channel narrow and difficult
to exploit; still, rejecting the malformed CE outright matches the
rejection shape already present in the same function for
cont_offset and cont_size.
Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next
to the existing offset/size rejection, printing the same
corrupted-directory-entry notice. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
Yiming reports an integer underflow in mpi_read_raw_from_sgl() when
subtracting "lzeros" from the unsigned "nbytes".
For this to happen, the scatterlist "sgl" needs to occupy more bytes
than the "nbytes" parameter and the first "nbytes + 1" bytes of the
scatterlist must be zero. Under these conditions, the while loop
iterating over the scatterlist will count more zeroes than "nbytes",
subtract the number of zeroes from "nbytes" and cause the underflow.
When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally
introduced the bug, it couldn't be triggered because all callers of
mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to
"nbytes".
However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto
interface without scatterlists"), the underflow can now actually be
triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a
larger "out_len" than "in_len" and filling the "in" buffer with zeroes,
crypto_akcipher_sync_prep() will create an all-zero scatterlist used for
both the "src" and "dst" member of struct akcipher_request and thereby
fulfil the conditions to trigger the bug:
sys_keyctl()
keyctl_pkey_e_d_s()
asymmetric_key_eds_op()
software_key_eds_op()
crypto_akcipher_sync_encrypt()
crypto_akcipher_sync_prep()
crypto_akcipher_encrypt()
rsa_enc()
mpi_read_raw_from_sgl()
To the user this will be visible as a DoS as the kernel spins forever,
causing soft lockup splats as a side effect.
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
NETIF_F_IPV6_CSUM only advertises support for checksum offload of
packets without IPv6 extension headers. Packets with extension
headers must fall back onto software checksumming. Since TSO
depends on checksum offload, those must revert to GSO.
The below commit introduces that fallback. It always checks
network header length. For tunneled packets, the inner header length
must be checked instead. Extend the check accordingly.
A special case is tunneled packets without inner IP protocol. Such as
RFC 6951 SCTP in UDP. Those are not standard IPv6 followed by
transport header either, so also must revert to the software GSO path. |
