| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component.
This issue affects Apache Camel: from 4.21.0 before 4.22.2.
WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap. |
| Plex Media Server before 1.43.3.10861 allows an authenticated user to request arbitrary internal or external addresses via the '/video/:/transcode/universal' path parameter. |
| FasterXML jackson-databind 2.x before 2.9.7 might allow remote attackers to conduct server-side request forgery (SSRF) attacks by leveraging failure to block the axis2-jaxws class from polymorphic deserialization. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability where the processed stream at unmarshalling time contains type information to recreate the formerly written objects. XStream creates therefore new instances based on these type information. An attacker can manipulate the processed input stream and replace or inject objects, that result in a server-side forgery request. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16. |
| XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.15, a Server-Side Forgery Request vulnerability can be activated when unmarshalling. The vulnerability may allow a remote attacker to request data from internal resources that are not publicly available only by manipulating the processed input stream. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.15. The reported vulnerability does not exist if running Java 15 or higher. No user is affected who followed the recommendation to setup XStream's Security Framework with a whitelist! Anyone relying on XStream's default blacklist can immediately switch to a whilelist for the allowed types to avoid the vulnerability. Users of XStream 1.4.14 or below who still want to use XStream default blacklist can use a workaround described in more detailed in the referenced advisories. |
| Weaver e-Bridge contains an unauthenticated arbitrary file read vulnerability that allows remote attackers to access arbitrary files on the host system by supplying a file: URL to the downloadUrl parameter of the saveYZJFile endpoint. Attackers can exploit this flaw to read sensitive files such as /etc/passwd or configuration and credential files, and the same endpoint's support for http(s) URLs also enables server-side request forgery against internal network resources. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-17. |
| Server Side Request Forgery in vRealize Operations Manager API (CVE-2021-21975) prior to 8.4 may allow a malicious actor with network access to the vRealize Operations Manager API can perform a Server Side Request Forgery attack to steal administrative credentials. |
| When requests to the internal network for webhooks are enabled, a server-side request forgery vulnerability in GitLab affecting all versions starting from 10.5 was possible to exploit for an unauthenticated attacker even on a GitLab instance where registration is disabled |
| VMware Workspace ONE UEM console 20.0.8 prior to 20.0.8.37, 20.11.0 prior to 20.11.0.40, 21.2.0 prior to 21.2.0.27, and 21.5.0 prior to 21.5.0.37 contain an SSRF vulnerability. This issue may allow a malicious actor with network access to UEM to send their requests without authentication and to gain access to sensitive information. |
| mcp-remote versions 0.1.32 through 0.1.38 are vulnerable to Server-Side Request Forgery (SSRF) via the resource_metadata URL extracted from a remote MCP server's WWW-Authenticate header |
| A flaw was found in Red Hat Quay's Proxy Cache configuration feature. When an organization administrator configures an upstream registry for proxy caching, Quay makes a network connection to the specified registry hostname without verifying that it points to a legitimate external service. An attacker with organization administrator privileges could supply a crafted hostname to force the Quay server to make requests to internal network services, cloud infrastructure endpoints, or other resources that should not be accessible from the Quay application. |
| An SSRF issue was discovered in OpenStack Glance before Newton. The 'copy_from' feature in the Image Service API v1 allowed an attacker to perform masked network port scans. With v1, it is possible to create images with a URL such as 'http://localhost:22'. This could then allow an attacker to enumerate internal network details while appearing masked, since the scan would appear to originate from the Glance Image service. |
| A server-side request forgery (SSRF) vulnerability was found in galaxy_ng, the Ansible Galaxy server plugin for Pulp. An authenticated user with namespace management permissions can set a namespace avatar URL to an arbitrary address, including internal networks, loopback, or cloud instance metadata endpoints. A background worker fetches that URL without checking the destination, which lets the attacker probe internal services and enumerate reachable IP addresses. The HTTP client is also configured without an overall timeout, so a slow or non-responsive target can pin workers and cause a denial of service. |
| A server-side request forgery (SSRF) vulnerability was found in multiple AWX notification backends. The webhook, Mattermost, Rocket.Chat, and Grafana notification backends use notification template URLs as direct HTTP request targets without validating the target address against private, loopback, or reserved IP ranges. An organization notification administrator can create notification templates pointing to internal or loopback addresses, causing the AWX control node to issue HTTP requests to services that are not externally accessible. Additionally, the webhook notification backend follows HTTP redirects and resends configured Basic Authentication credentials to redirect targets regardless of host change, allowing an attacker to exfiltrate notification credentials by redirecting to an attacker-controlled host. The Grafana backend sends its API key in the Authorization header to the configured target URL. |
| A flaw was found in Apicurio Registry. The WSDLReaderAccessor creates a wsdl4j WSDLReader without disabling the javax.wsdl.importDocuments feature. When the VALIDITY rule is set to FULL, an attacker with Developer-role access can upload a WSDL document containing attacker-controlled import locations, causing the registry to issue HTTP requests to arbitrary internal URLs (server-side request forgery). |
| Axios is a promise based HTTP client for the browser and Node.js. Prior to 1.15.0 and 0.31.0, Axios does not correctly handle hostname normalization when checking NO_PROXY rules. Requests to loopback addresses like localhost. (with a trailing dot) or [::1] (IPv6 literal) skip NO_PROXY matching and go through the configured proxy. This goes against what developers expect and lets attackers force requests through a proxy, even if NO_PROXY is set up to protect loopback or internal services. This issue leads to the possibility of proxy bypass and SSRF vulnerabilities allowing attackers to reach sensitive loopback or internal services despite the configured protections. This vulnerability is fixed in 1.15.0 and 0.31.0. |
| A server-side request forgery (SSRF) vulnerability was found in AWX's webhook status callback mechanism. When processing GitHub pull request webhooks, AWX extracts the status callback URL (pull_request.statuses_url) from the incoming webhook payload without validating the target host against the expected Git provider. This URL is persisted in job extra variables and later used to send authenticated status updates. A user with admin role on a webhook-enabled job template can read the template's webhook signing key, forge a signed GitHub webhook payload with an arbitrary statuses_url, and cause AWX to POST status updates to an attacker-controlled or internal URL. The status update request includes the configured Git Personal Access Token (PAT) in the Authorization header, resulting in credential leakage to the attacker-specified endpoint. |
| Adobe Campaign Classic Gold Standard 10 (and earlier), 20.3.1 (and earlier), 20.2.3 (and earlier), 20.1.3 (and earlier), 19.2.3 (and earlier) and 19.1.7 (and earlier) are affected by a server-side request forgery (SSRF) vulnerability. Successful exploitation could allow an attacker to use the Campaign instance to issue unauthorized requests to internal or external resources. |
| Microsoft Exchange Server Remote Code Execution Vulnerability |
| Axios is a promise based HTTP client for the browser and Node.js. Versions prior to 1.15.0 and 0.3.1 are vulnerable to a specific gadget-style attack chain in which prototype pollution in a third-party dependency may be leveraged to inject unsanitized header values into outbound requests. This vulnerability is fixed in 1.15.0 and 0.3.1. |
