| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
Patch series "mm/hmm: A fix and a selftest", v3.
Patch 1 fixes a stale warning present from the time when only migration
softleaf entries were supported at the PMD level.
Patch 2 adds some code into hmm-tests.c which exercises the pagemap path
for PMD device-private entries.
This patch (of 2):
pagemap_pmd_range_thp() warns if a non-present PMD is not a migration
entry. This became false once device-private entries at the PMD level
were added.
Therefore, remove the stale migration-only assertion. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel
address and generally results in an oops.
Use sizeof(fifo_buffer) so the byte count matches pointer width on every
architecture.
The driver has no architecture restriction in Kconfig, so any 64-bit
build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has
been latent since the driver was added in 2017 because it is most
commonly deployed on 32-bit MCUs.
Found via a custom Coccinelle semantic patch hunting for short-byte
kfifo I/O on byte-mode kfifos used to shuttle pointers. |
| A security vulnerability has been detected in Webkul Bagisto up to 2.4.4. This vulnerability affects unknown code of the file /admin/reporting/sales/ of the component Backend Reporting Endpoint. The manipulation leads to authorization bypass. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| rsync 3.1.0 before 3.5.0 contains an access control bypass vulnerability that allows remote attackers to circumvent hosts deny rules by inducing DNS resolution failures during hostname-based access control evaluation. When a DNS lookup for a hostname-based deny rule fails, the daemon skips the rule rather than defaulting to a deny decision, enabling attackers who can trigger DNS failures to bypass module-level IP access controls and gain unauthorized access to restricted module file trees. |
| NetBox 4.5.8 contains an ORM injection vulnerability that allows authenticated attackers, including those with read-only API tokens, to inject arbitrary Django ORM lookup expressions into nested object references by supplying crafted JSON dictionary keys in POST, PUT, or PATCH requests to any REST API endpoint. Attackers can exploit the unrestricted queryset used by WritableNestedSerializer to perform boolean-based blind data extraction of sensitive field values and bypass object-level permissions across all application modules including dcim, ipam, tenancy, virtualization, circuits, and extras. |
| Courier IMAP before 6.0.1 and Courier Mail Server before 2.0.2 allow authenticated IMAP users to crash the imapd process via deeply nested parenthesized SEARCH queries. The SEARCH command parser (alloc_search_key in searchinfo.C) recursively descends on nested parenthesized groups through a mutual recursion chain with alloc_search_andlist() and alloc_search_notkey(), with no depth limit. Courier IMAP has no overall command line length limit, making exploitation trivial. A single IMAP command with ~2500 nested parentheses overflows the 8MB default stack, causing SIGSEGV. |
| CamaleonCMS version 2.9.2 and earlier contains a privilege escalation vulnerability via insecure direct object reference (IDOR) that allows authenticated low-privileged attackers to overwrite any user's credentials by exploiting a parameter confusion flaw between the authorization filter and action body in the UsersController. Attackers can send a PATCH request to the updated_ajax endpoint setting params[:id] to their own user ID to pass the self-authorization check while simultaneously setting params[:user_id] to a victim's ID, causing the controller to load and mutate the victim's account, including overwriting administrator passwords to achieve full site takeover. |
| rsync before 3.5.0 contains an arbitrary file read vulnerability that allows attackers to read files accessible to the rsync daemon process by exploiting symlink following in input configuration file handling including --files-from, --password-file, and filter merge files. Attackers can place a symlink at a predictable --files-from or --password-file path, or supply a --files-from path that escapes the daemon module root, to read arbitrary files accessible to the rsync process. |
| Flarum before 1.8.16 contains an improper session invalidation vulnerability that allows attackers who hold a valid session token to retain full account access after a victim changes their password, because the access_tokens table is never cleared on password change events. The TokensClearer::clearPasswordTokens() function only removes rows from the password_tokens table while leaving all active session cookies and API bearer tokens intact, including long-lived RememberAccessToken entries, and administrator-forced password resets via the user update endpoint are equally ineffective at revoking attacker-held sessions. |
| OpenPLC Runtime v3 contains an input validation flaw in the /upload-program-action endpoint: the epoch_time field supplied during program uploads is not validated and can be crafted to induce corruption of the programs database. After a successful malformed upload the runtime continues to operate until a restart; on restart the runtime can fail to start because of corrupted database entries, resulting in persistent denial of service requiring complete rebase of the product to recover. This vulnerability was remediated by commit 095ee09. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation. |
| Protection mechanism failure for some LLM-on-Ray before version 1.0 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires passive user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9.4.3: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.0: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 9723a8bed3aa251a26bee4583bac9d8fb064dd44) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. |
