| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix BQL reset on SQ re-activation
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page
objects, which GPUSVM requires in order to operate correctly. In
particular, get_pages() relies on hmm_range_fault() to resolve struct
pages for the target range.
Attempting to create an SVM range on such VMAs results in repeated
get_pages() failures and can lead to an infinite loop inside a driver’s
page‑fault handler. Prevent this by rejecting ranges on VM_IO or
VM_PFNMAP VMAs and returning -EIO. |
| Headroom's LLM proxy derives the memory owner from the x-headroom-user-id request header. The header is read directly at several points in headroom/proxy/handlers/openai.py, including the chat completion and websocket paths, and nothing binds the value to the caller. A client can therefore name another user's identifier and read or write that user's stored LLM memory. The fix introduces a single resolve_memory_identity seam in headroom/proxy/identity.py that honors the header only for loopback or allowlisted callers and otherwise binds the identity to the proxy-token fingerprint or the operating system user. The pip console script binds 127.0.0.1 by default, but the reference docker-compose.yml ships --host 0.0.0.0 with published ports and no required HEADROOM_PROXY_TOKEN, which the server itself warns about at startup, so a deployment following the shipped compose exposes the affected data-plane routes to the network without authentication. |
| In Splunk AI Toolkit versions below 6.0.0, a user who holds the "power" Splunk role could access and delete all relevant data in experiment history, including data associated with other users. The vulnerability is possible because Splunk AI Toolkit does not preserve the trusted experiment scope when it processes caller-controlled query values before accessing restricted history data. For more information see Experiment Assistants (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/use-ai-toolkit/5.6.4/experiment-assistants) in the Splunk documentation. |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to uncontrolled recursion. |
| A flaw was found in Ansible Lightspeed. This vulnerability, related to insufficient session expiration, allows a remote attacker to maintain persistent access to the Ansible Lightspeed instance. If an attacker exfiltrates a valid OAuth (Open Authorization) access token before a user logs out, they can continue to authenticate and access sensitive data. This is because the application fails to invalidate the token on the backend, leaving it valid until its natural expiration. This can lead to unauthorized read access to Ansible resources such as inventories, playbooks, and configuration data. |
| The SmartCrawl SEO checker, analyzer & optimizer WordPress plugin before 3.16.3 does not perform capability checks on two of its AJAX actions, allowing users with at least the Subscriber role to read the titles of private and draft posts by ID and to enumerate stored post-meta key names. |
| A vulnerability was identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. Affected by this vulnerability is the function COPY/MOVE of the component WebDAV Service. Such manipulation leads to authorization bypass. It is possible to launch the attack remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| The KiviCare WordPress plugin before 4.5.4 does not verify that the requesting user is entitled to the media file being served, allowing authenticated patient-level users to download any file in the media library, including other patients' uploaded medical reports. |
| The KiviCare WordPress plugin before 4.5.4 does not verify that the requesting user owns the appointment being modified, allowing authenticated patient-level users to cancel and reschedule other patients' appointments. |
| A spoofing vulnerability exists when Microsoft Edge does not properly parse HTTP content. An attacker who successfully exploited this vulnerability could trick a user by redirecting the user to a specially crafted website. The specially crafted website could either spoof content or serve as a pivot to chain an attack with other vulnerabilities in web services.
To exploit the vulnerability, the user must click a specially crafted URL. In an email attack scenario, an attacker could send an email message containing the specially crafted URL to the user in an attempt to convince the user to click it.
In a web-based attack scenario, an attacker could host a specially crafted website designed to appear as a legitimate website to the user. However, the attacker would have no way to force the user to visit the specially crafted website. The attacker would have to convince the user to visit the specially crafted website, typically by way of enticement in an email or instant message, and then convince the user to interact with content on the website.
The update addresses the vulnerability by correcting how Microsoft Edge parses HTTP responses. |
| An elevation of privilege vulnerability exists when the Windows Print Spooler service improperly allows arbitrary writing to the file system. An attacker who successfully exploited this vulnerability could run arbitrary code with elevated system privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
To exploit this vulnerability, an attacker would have to log on to an affected system and run a specially crafted script or application.
The update addresses the vulnerability by correcting how the Windows Print Spooler Component writes to the file system. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma6.0: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd) |
| By holding a reference to the eval() function from an about:blank window, a malicious webpage could have gained access to the InstallTrigger object which would allow them to prompt the user to install an extension. Combined with user confusion, this could result in an unintended or malicious extension being installed. This vulnerability affects Firefox < 80, Thunderbird < 78.2, Thunderbird < 68.12, Firefox ESR < 68.12, Firefox ESR < 78.2, and Firefox for Android < 80. |
| OneCRL was non-functional in the new Firefox for Android due to a missing service initialization. This could result in a failure to enforce some certificate revocations. *Note: This issue only affected Firefox for Android. Other operating systems are unaffected.*. This vulnerability affects Firefox < 83. |
| Mozilla developers reported memory safety bugs present in Firefox for Android 79. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 80, Firefox ESR < 78.2, Thunderbird < 78.2, and Firefox for Android < 80. |
| A lock was missing when accessing a data structure and importing certificate information into the trust database. This vulnerability affects Firefox < 80 and Firefox for Android < 80. |
