| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tegra/soctherma: Switch to devm cooling device registration
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix use-after-free in acpi_ds_terminate_control_method()
Fix use-after-free issue in acpi_ds_terminate_control_method() by
clearing references to method locals and arguments. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix UAF race in destroy_queue_cpsch
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol()
If during relocation we fail in insert_dirty_subvol() because
btrfs_update_reloc_root() returned an error, we will leave a root's
reloc_root field pointing to a reloc root that was freed instead of NULL,
resulting later in a use-after-free, or double free attempt during
unmount.
The sequence of steps is this:
1) During relocation the call to btrfs_update_reloc_root() in
insert_dirty_subvol() fails, so insert_dirty_subvol() returns the
error to merge_reloc_root() without adding the root to the list
rc->dirty_subvol_roots;
2) Then merge_reloc_root() aborts the current transaction because
insert_dirty_subvol() returned an error;
3) Up the call chain, merge_reloc_roots() gets the error, adds the
reloc root for root X to the local reloc_roots list and jumps to the
'out' label, where it calls free_reloc_roots() to free all the reloc
roots in the local reloc_roots list. This frees the reloc root for
root X;
4) We go up the call chain to relocate_block_group() which calls
clean_dirty_subvols() to go over dirty roots and set their
->reloc_root field to NULL, but root X is not in the dirty_subvol_roots
list, so its ->reloc_root still points to a reloc root;
5) Relocation finishes, with an error and a transaction abort, but the
->reloc_root field for root X still points to the reloc root that was
freed in step 3;
6) When unmounting the fs we end up calling:
btrfs_free_fs_roots()
btrfs_drop_and_free_fs_root()
--> calls btrfs_put_root() against root X's ->reloc_root
which is not NULL and points to the already freed
reloc root in step 4 above
Resulting in a use-after-free to a double free attempt.
Syzbot reported this with the following dmesg/syslog:
[ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5)
[ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure
[ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5
[ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction.
[ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
[ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure
[ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly
[ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure
[ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1
[ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30
[ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30
[ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409
[ 106.682946][ T5338] ==================================================================
[ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250
[ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338
[ 106.693173][ T5338]
[ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
[ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 106.694300][ T5338] Call Trace:
[ 106.694308][ T5338] <TASK>
[ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150
[ 106.694331][ T5338] print_address_description+0x55/0x1e0
[ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250
[ 106.694358][ T5338] print_report+0x58/0x70
[ 106.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix UAF in selftest IOPF reporting
IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from
group->pasid_array without synchronizing against PASID detach,
then a concurrent iommu_report_device_fault() can dereference
that borrowed handle's domain pointer after the detach erases
the handle and frees the backing struct iommufd_attach_handle.
TRIGGER_IOPF then dereferences the freed handle, causing a UAF.
Fix by adding a iopf_rwsem in mock_dev to follow the expected design
of a real driver. Hold its read side across the whole
iommu_report_device_fault() call, and its write side around every
path that attaches, detaches, or replaces a device domain.
This can block new reports and drains in-flight reports before an old
attach handle or the IOPF fault parameter can be removed.
Also take the write side while registering a mock device, since
it can invoke the mock driver's default-domain attach callback. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry
svcauth_gss_decode_credbody() writes the caller's
rpc_gss_wire_cred field by field and assigns gc_ctx.len only on
the success tail. The caller storage is svcdata->clcred, which
lives in the per-svc_rqst gss_svc_data and is reused across
requests. Early decode failures leave partially decoded state
mixed with residue from the prior request.
The trailing body_len tightness check is the sharpest case:
xdr_stream_decode_opaque_inline() has already written gc_ctx.data
with a borrowed inline pointer into the current request's XDR
pages, but gc_ctx.len retains its prior value. Once the request
pages are released the pooled clcred carries a dangling pointer
paired with a stale length.
Zero the caller's rpc_gss_wire_cred at function entry so that
every early-return path leaves a deterministic all-zero cred.
On the trailing tightness-check path, gc_ctx.len is now zero
instead of stale, which neuters length-driven consumers such as
gss_svc_searchbyctx() that would otherwise walk the dangling
data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in uverbs_free_dmah()
When accessing a dmah via the netlink path the only synchronization
mechanism for the said dmah is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
uverbs_free_dmah(), which is too late, since by that point
vendor-specific resources associated with the dmah might already be
freed. This can leave a short window where the dmah remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
uverbs_free_dmah(), ensuring that the dmah is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a dmah that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix device_register() error path
When device_register() fails in i3c_master_register_new_i3c_devs(),
put_device() is called to drop the reference taken by
device_register(). That drops the last reference, so the device's
release callback i3c_device_release() runs and frees the i3c_device.
Two problems follow from that:
i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because
desc->dev->desc still points back at the descriptor. Clear it before
calling put_device().
After put_device() frees the i3c_device, desc->dev is left pointing at
freed memory, so clear desc->dev as well. That prevents, for example,
i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
</IRQ>
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: purge async notifications upon nic error
This fixes a kernel panic in reconfig failure:
1. we have a BSS connection
2. we have a NAN connection
3. FW error occurs
4. reconfig restores the BSS connection
5. however, restoring the NAN connection fails due to a FW error.
6. erroneously, ieee80211_handle_reconfig_failure is called and marks all
interfaces as not-in-driver (will be fixed in a different patch).
7. mac80211 frees the links of the BSS connection but doesn't tell the
driver about that, as it thinks that this vif is not in the driver.
8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed
(erroneously?)
9. Therefore, async_handlers_wk is being executed, processing the
statistics notification that was received after we restored the BSS
connection.
10. the notification handler dereferences fw_id_to_bss_conf[id], which is
now a dangling pointer, as mac80211 already freed this link in (7).
11. On the first access to one of the links fields, we panic.
While this can and should be fixed by removing the call to
ieee80211_handle_reconfig_failure in (6), it is also not a good idea to
carry and maybe handle notifications from a dead FW.
We do purge the notifications when we stop the FW, but in reconfig
failure we stop the FW too late, after the notifications are processed.
In addition, async_handlers_wk can always be scheduled before the
reconfig work.
Purge the notifications immediately when transport notifies about a nic
error. |
| PDFio before 1.6.5 contains a dangling pointer vulnerability in the dictionary string-formatting function that stores a pointer to a stack-local buffer in the document dictionary without copying the string value. In multi-threaded or pooled-request environments, attackers or concurrent users can trigger stack memory reuse across requests, causing cross-tenant document content corruption by silently overwriting one caller's dictionary string values with another caller's data. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
