| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange. |
| A flaw was found in BlueZ. An out-of-bounds read vulnerability exists in the btmon Bluetooth monitor tool when processing crafted HCI Return Link Keys events. A maliciously crafted btsnoop capture file can specify a large number of link keys that exceeds the actual packet data, causing btmon to read beyond the allocated buffer and crash. |
| A flaw was found in SSSD. A local attacker can exploit this vulnerability by sending a specially crafted request to the autofs responder UNIX socket. Due to improper buffer offset calculation during request parsing, the service performs an out-of-bounds memory read. This flaw can cause the autofs responder process to crash, resulting in a denial of service (DoS). |
| A flaw was found in the Keycloak keycloak-services component, which handles the management of identity providers. The issue occurs when a delegated administrator updates an OIDC identity provider using a masked client secret sentinel value. Due to improper validation, Keycloak reuses the existing real secret even if security-sensitive fields like the token URL have been changed, allowing an attacker to redirect and capture the secret. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in TCP state lookup
TCP state handling reparses the skb to find the TCP header. For IPv6 it
uses sizeof(struct ipv6hdr), while the surrounding IPVS code already
parsed the packet with ip_vs_fill_iph_skb() and has the real
transport-header offset in iph.len.
This makes TCP state handling look at the wrong bytes when an IPv6
packet carries extension headers. Use the parsed transport offset passed
down from ip_vs_set_state() when reading the TCP header.
For IPv4 and for IPv6 packets without extension headers, the passed
offset matches the previous value. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: validate attr entry pointer before field access
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hyperv: validate initial device info bounds
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a class permission count below its inherited common
security_get_permissions() maps an inherited common's permissions into
an array sized by the class's own permissions.nprim, but class_read()
takes that nprim verbatim from the policy image and never checks that it
covers the common. A class that inherits a common of N permissions while
declaring a smaller nprim is accepted, and on load the common's
permissions are written past the class-sized array -- an out-of-bounds
heap write.
Reject a class whose permission count is below its inherited common's.
Well-formed policies, where the class count already includes the
inherited permissions, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - sanitize event type index when fetching event masks
The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK
ioctls is used to index the static counts array in evdev_get_mask_cnt()
and client evmasks array in evdev_get_mask().
While the event type is architecturally bounded by EV_CNT, speculative
execution may mispredict bounds checks and perform out-of-bounds loads.
Sanitize the event type index in evdev_get_mask_cnt() branchlessly using
array_index_mask_nospec(). This clamps the index to 0 for safe array
access and forces the returned count to 0 speculatively when the index
is out of bounds.
We do not need additional array_index_nospec() calls in evdev_get_mask()
because evdev_get_mask_cnt() speculatively forces the count (and
resulting xfer_size) to 0 for out-of-bounds types, preventing any
speculative memory access to client evmasks array. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: add permission check for KDSKBMETA ioctl
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: fix out-of-bounds read in xattr_verify()
The digest-length check in xattr_verify() mixes int and size_t:
if (xattr_len - sizeof(xattr_value->type) - hash_start >=
iint->ima_hash->length)
sizeof() yields size_t, so the usual arithmetic conversions promote
the whole left-hand side to unsigned 64-bit before the subtraction
runs. For a truncated xattr this underflows instead of going negative:
a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1)
turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length.
The check then passes and the following memcmp() reads
iint->ima_hash->length bytes starting past the end of the buffer
vfs_getxattr_alloc() allocated for it.
Nothing upstream clamps xattr_len back into a safe range first:
ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default
algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than
failing when no HMAC key is loaded, so a truncated security.ima value
reaches the length check as-is.
Rewrite the comparison so every operand stays a signed int and no
implicit conversion to size_t can occur. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in WMM_param_handler()
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length. |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix OOB read during CQ MR registration
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: sm501fb: Fix buffer errors in OF binding code
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack slot index in nospec checks
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[]. |
