Export limit exceeded: 203872 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10273 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-56111 | 2 Marlinfirmware, Marlinfw | 2 Marlin, Marlin Firmware | 2026-07-28 | 9.1 Critical |
| Marlin Firmware through 2.1.2.7, fixed in commit 1f255d1, when built with MESH_BED_LEVELING enabled, contains an out-of-bounds write vulnerability in the M421 G-code handler that allows attackers to corrupt firmware memory by supplying out-of-range X and Y grid indices. Attackers can send a single crafted G-code command via USB serial, network interface, or malicious gcode file to write an attacker-controlled 32-bit float value past the z_values array bounds, corrupting adjacent firmware variables and causing denial of service or firmware state corruption. | ||||
| CVE-2026-53994 | 2 Proftpd, Proftpd Project | 2 Proftpd, Proftpd | 2026-07-28 | 7.5 High |
| ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated remote denial of service. Depending on heap layout and adjacent allocations, heap metadata corruption and further consequences beyond denial of service may be possible, though only denial of service is demonstrated by the supplied proof of concept. | ||||
| CVE-2020-37206 | 1 Nsasoft | 2 Nsauditor Sharealarmpro Advanced Network Access Control, Sharealarmpro | 2026-07-28 | 7.5 High |
| ShareAlarmPro contains a denial of service vulnerability that allows attackers to crash the application by supplying an oversized registration key. Attackers can generate a 1000-character buffer payload to trigger an application crash when pasted into the registration key field. | ||||
| CVE-2020-37040 | 1 Codeblocks | 2 Code::blocks, Code\\ | 2026-07-28 | 8.4 High |
| Code Blocks 17.12 contains a local buffer overflow vulnerability that allows attackers to execute arbitrary code by crafting a malicious file name with Unicode characters. Attackers can trigger the vulnerability by pasting a specially crafted payload into the file name field during project creation, potentially executing system commands like calc.exe. | ||||
| CVE-2019-25741 | 1 Mobatek | 1 Mobaxterm | 2026-07-28 | 9.8 Critical |
| Mobatek MobaXterm 12.1 contains a structured exception handling (SEH) based buffer overflow vulnerability in the username field of session files that allows remote attackers to execute arbitrary code. Attackers can craft a malicious MobaXterm sessions file with overflow data that triggers the vulnerability when imported and executed, enabling reverse shell execution with user privileges. | ||||
| CVE-2019-25434 | 1 Nsasoft | 2 Nsauditor Spotauditor, Spotauditor | 2026-07-28 | 7.5 High |
| SpotAuditor 5.3.1.0 contains a denial of service vulnerability that allows unauthenticated attackers to crash the application by submitting excessive data in the registration name field. Attackers can enter a large string of characters (5000 bytes or more) in the name field during registration to trigger an unhandled exception that crashes the application. | ||||
| CVE-2018-25377 | 1 Socusoft | 1 Flash Slideshow Maker | 2026-07-28 | 8.4 High |
| Flash Slideshow Maker Professional 5.20 contains a buffer overflow vulnerability in the registration dialog that allows local attackers to execute arbitrary code by exploiting structured exception handling. Attackers can craft a malicious payload and paste it into the Name and Code fields of the Help > Register dialog to trigger a reverse shell with system privileges. | ||||
| CVE-2026-66035 | 2 Libssh2, Redhat | 2 Libssh2, Hummingbird | 2026-07-28 | 7.5 High |
| libssh2 through 1.11.1, fixed in commit 42e33d8, contains a pre-authentication heap buffer overflow vulnerability that allows a malicious SSH server to corrupt heap metadata in any connecting client by sending a packet with a packet_length smaller than the cipher's block size during Encrypt-then-MAC cipher negotiation. In the fullpacket() function in src/transport.c, the ETM path allocates a buffer of packet_length bytes but copies blocksize minus one bytes via memcpy, causing an overflow that on 32-bit glibc writes attacker-controlled bytes into an adjacent chunk's SIZE field, enabling tcache bin confusion, overlapping live objects, and function pointer overwrite during the session handshake before authentication. | ||||
| CVE-2026-66034 | 2 Libssh2, Redhat | 2 Libssh2, Hummingbird | 2026-07-28 | 7.5 High |
| libssh2 through 1.11.1, fixed in commit a13bb6c, contains a missing bounds check vulnerability that allows a malicious SSH server to trigger an arbitrary-length heap out-of-bounds read and a free of an uninitialized pointer via the publickey subsystem. In libssh2_publickey_list_fetch(), the version 1 response parser reads a server-controlled comment_len value and advances the parse pointer without verifying sufficient bytes remain in the buffer, causing the out-of-bounds read to leak heap pointers from adjacent allocations defeating ASLR, followed by heap allocator state corruption when the error cleanup path frees an uninitialized pointer from a non-zeroed realloc() region. | ||||
| CVE-2026-66033 | 2 Libssh2, Redhat | 2 Libssh2, Hummingbird | 2026-07-28 | 7.5 High |
| libssh2 through 1.11.1, fixed in commit a2ed82d, contains a pre-authentication integer underflow vulnerability in the ssh2_cipher_crypt() function in src/openssl.c that allows a malicious SSH server to crash any connecting client by negotiating AES-GCM ciphers during handshake. Attackers can exploit the underflow in the expression computing blocksize minus aadlen minus authentication tag length to trigger an out-of-bounds read and a memcpy call with a near-SIZE_MAX length argument, causing immediate process crash before any authentication occurs. | ||||
| CVE-2026-63895 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace. | ||||
| CVE-2026-59695 | 2 Zenhive, Zenhive | 2 Mpp, Mpp | 2026-07-23 | N/A |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet in a single request by naming an arbitrarily high gas price. When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including max_fee_per_gas and max_priority_fee_per_gas, without validating that they are within reasonable bounds. A malicious client embeds arbitrarily large values for these fields in the signed envelope. The server co-signs and broadcasts the transaction. The effective_gas_price billed against the fee-payer wallet is derived from the attacker-supplied ceilings, so the server pays those inflated per-gas rates out of its own wallet. A single crafted request can drain the wallet entirely, after which the server can no longer sponsor gas for legitimate payment requests. This issue affects mpp: from 0.2.0 before 0.6.0. | ||||
| CVE-2026-59694 | 2 Zenhive, Zenhive | 2 Mpp, Mpp | 2026-07-23 | N/A |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per payment by a large multiplier, degrading the sponsor's operating margin. When the mpp Elixir library is configured as fee payer (fee_payer: true), MPP.Tempo.Transaction.cosign_fee_payer/3 re-signs the client-supplied base fields of the 0x76 AASigned envelope verbatim, including the EIP-2930 access list, without validating its length or contents. EIP-2930 access list entries incur intrinsic gas (~2,400 gas per address, plus 1,900 gas per storage key) charged before any opcode executes, regardless of whether the listed addresses are ever touched. A malicious client submits a valid transferWithMemo call alongside a large number of fabricated access-list entries. The server co-signs and broadcasts the transaction. The intended transfer executes normally, but the fee-payer wallet pays a large multiple of the expected gas cost with no corresponding on-chain work. At the maintainer's default of 137 access-list entries (fitting within Bandit's 10,000-byte per-header-field limit) and 100 Gwei max_fee_per_gas, per-payment gas cost rises from ~51,287 to ~380,087 gas, a 7.4x multiplier. Sustained abuse destroys the sponsor's operating margin on low-cost payments and, over time, drains the fee-payer wallet. This issue affects mpp: from 0.2.0 before 0.6.0. | ||||
| CVE-2026-16359 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-22 | 9.1 Critical |
| Incorrect boundary conditions in the Audio/Video: GMP component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. | ||||
| CVE-2026-63883 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush. | ||||
| CVE-2026-34961 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 6.2 Medium |
| barebox prior to version 2026.04.0 contains out-of-bounds read vulnerabilities in ext4 extent parsing due to missing validation of the eh_entries field against buffer capacity in fs/ext4/ext4_common.c. Attackers can supply a malicious ext4 filesystem image via USB, SD card, or network boot to trigger heap out-of-bounds reads during boot-time filesystem parsing, potentially redirecting reads to arbitrary disk offsets. | ||||
| CVE-2026-34960 | 2 Barebox, Pengutronix | 2 Barebox, Barebox | 2026-07-18 | 6.5 Medium |
| barebox prior to version 2026.04.0 contains an out-of-bounds read vulnerability in DHCP option parsing within the dhcp_message_type() function that fails to verify the options pointer remains within received packet bounds. An attacker on the same broadcast domain can send a crafted DHCP Offer or ACK packet without a proper 0xff end marker to cause the parser to read past valid packet data and potentially crash the system. | ||||
| CVE-2020-37136 | 2 Ejinshan, Emtec | 2 Terminal Security System, Zoc Terminal | 2026-07-15 | 7.5 High |
| ZOC Terminal 7.25.5 contains a denial of service vulnerability in the private key file input field that allows attackers to crash the application. Attackers can overwrite the private key file input with a 2000-byte buffer, causing the application to become unresponsive when attempting to create SSH key files. | ||||
| CVE-2020-37130 | 2 Nsasoft, Nsauditor | 2 Nsauditor, Nsauditor | 2026-07-15 | 7.5 High |
| Nsauditor 3.2.0.0 contains a denial of service vulnerability in the registration name input field that allows attackers to crash the application. Attackers can create a malicious payload of 1000 bytes of repeated characters to trigger an application crash when pasted into the registration name field. | ||||
| CVE-2020-37128 | 2 Ejinshan, Emtec | 2 Terminal Security System, Zoc Terminal | 2026-07-15 | 6.2 Medium |
| ZOC Terminal 7.25.5 contains a script processing vulnerability that allows local attackers to crash the application by loading a maliciously crafted REXX script file. Attackers can generate an oversized script with 20,000 repeated characters to trigger an application crash and cause a denial of service. | ||||