Export limit exceeded: 235607 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1941 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74586 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT. | ||||
| CVE-2026-74583 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: fix fastmap use-after-free on filter The route4 classifier maintains a 16-slot fastmap cache that stores raw struct route4_filter pointers indexed by (id, iif). The reader (route4_classify) populates this cache via route4_set_fastmap() for every classified packet that hits a filter. The writer (route4_delete, route4_change) clears the cache via route4_reset_fastmap() before RCU-deferred kfree of the filter. This creates a UAF race: 1. Reader walks the RCU-protected bucket chain, finds filter f 2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work() 3. Reader calls route4_set_fastmap() and writes f into the cache *after* the writer's reset, caching a pointer about to be freed 4. After the RCU grace period, kfree(f) executes 5. Next classified packet on the same (id, iif) tuple hits the stale fastmap entry and reads f->res from freed memory Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a concurrent add/delete stress test (provided by both zdi and Santosh). Both triggered KASAN slab-use-after-free reports in the route4 fastmap paths. Fix: Introduce a per-filter boolean dying flag to suppress stale fastmap republishing by in-flight readers. | ||||
| CVE-2026-74573 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID taken from master->streams[0], assuming a device has exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP when master->num_streams is not one, rather than mapping it silently. | ||||
| CVE-2026-74568 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Fix race between LPI release and re-registration Fix a potential race between decrementing an LPI's reference count and evicting that structure from the LPI xarray. LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa). When the reference count of an LPI structure drops to zero, vgic_release_lpi_locked() removes the structure from the xarray and frees it under the xarray lock. However, the release of an LPI can race with a concurrent LPI re-registration with the same INTID via vgic_add_lpi() on another CPU, since the reference count drop and the xarray eviction are not performed in a single atomic step. This can happen e.g. if the guest issues a DISCARD while the LPI is still referenced from a vCPU's active-pending list (ap_list), and the same INTID is re-mapped via MAPTI. Particularly, vgic_release_lpi_locked() is called from two distinct paths: direct release via vgic_put_irq(), and deferred release via vgic_release_deleted_lpis(). During direct release, the issue can result in deleting a newly registered LPI from the xarray: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq() __vgic_put_irq() refcount_dec_and_test() vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(old_irq) == false new IRQ inserted --> __xa_store(.., intid, ..) xa_unlock_irqrestore() xa_lock_irqsave(); vgic_release_lpi_locked() __xa_erase(.., irq->intid) <-- BUG: new IRQ is erased kfree_rcu(old_irq) During the deferred release path, the old IRQ can be leaked: CPU0 (Releasing LPI) CPU1 (Adding new LPI) ==================== ===================== vgic_put_irq_norelease() __vgic_put_irq() refcount_dec_and_test() irq->pending_release = true vgic_add_lpi() xa_lock_irqsave() old_irq = xa_load(.., intid) vgic_try_get_irq_ref(oldirq) == false BUG: old IRQ overwritten --> __xa_store(.., intid, ..) xa_unlock_irqrestore() vgic_release_deleted_lpis() xa_lock_irqsave() xa_for_each() { .. } <-- old IRQ with pending_release = true is gone, so it cannot be released To fix the direct release path, move the reference count drop inside the xarray lock, making sure that vgic_add_lpi() never encounters the to-be-released LPI. In the deferred release path, the refcount drop must happen under a raw spinlock, so the xarray lock cannot be grabbed, and the same solution does not work. Instead, update vgic_add_lpi(), so that if it evicts an LPI from the xarray, it takes on the responsibility of freeing it. Consequently, an LPI may now be freed concurrently after a deferred release drops the refcount, so accessing the pending_release field is no longer safe from use-after-free. Delete all uses of the flag, and update vgic_release_deleted_lpis() to identify orphaned LPIs purely based on their refcount. | ||||
| CVE-2026-74563 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check() rds_tcp_laddr_check() looks up a scoped IPv6 interface with dev_get_by_index_rcu(), drops the RCU read-side lock, and only then passes the bare struct net_device * into ipv6_chk_addr(). dev_get_by_index_rcu() only keeps the device alive within the same RCU read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can free the net_device; ipv6_chk_addr() then dereferences the stale pointer in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading freed memory. Keep the RCU read-side lock held across the ipv6_chk_addr() call instead of dropping it right after the lookup, so the device cannot be freed while it is in use. BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) Read of size 8 at addr ffff8880106ec000 by task exploit/153 Call Trace: ... kasan_report (mm/kasan/report.c:595) __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998) ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972) rds_tcp_laddr_check (net/rds/tcp.c:370) rds_bind (net/rds/bind.c:248) __sys_bind (net/socket.c:1920) __x64_sys_bind (net/socket.c:1956) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-74548 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). | ||||
| CVE-2026-74541 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). | ||||
| CVE-2026-74540 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers. | ||||
| CVE-2026-74535 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer. | ||||
| CVE-2026-74531 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74512 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed. | ||||
| CVE-2026-74510 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callback removes it before the cancel path dereferences it. This can lead to a use-after-free and a second list_del(). Make the pairing lookup helpers transfer ownership of the pending command by removing it from hdev->mgmt_pending while holding mgmt_pending_lock. The callbacks and cancel path then complete the command and free it directly, so racing paths cannot find or free the same command again. Take a temporary hci_conn reference in cancel_pair_device() because the command completion drops the reference stored in the pending command. | ||||
| CVE-2026-74509 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix advertising data UAFs hci_find_adv_instance() returns an adv_info pointer that is valid only while hdev->lock is held. The advertising command-sync paths perform instance lookups without that lock and, in some cases, retain the pointer while waiting for a controller response. An advertising termination event can therefore interleave as follows: hci_cmd_sync_work hci_rx_work hci_find_adv_instance() __hci_cmd_sync_status() wait for controller reply hci_dev_lock() hci_remove_adv_instance() kfree(adv) adv->scan_rsp_changed = false KASAN reported: BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_set_ext_scan_rsp_data_sync+0x2e1/0x300 hci_schedule_adv_instance_sync+0x390/0x4c0 hci_cmd_sync_work+0x173/0x300 Allocated by task 87: hci_add_adv_instance+0x538/0xac0 add_advertising+0x885/0x1160 Freed by task 89: kfree+0x131/0x3c0 hci_remove_adv_instance+0x1d8/0x3b0 hci_le_ext_adv_term_evt+0x17b/0x730 Protect the instance lookup and payload construction in the extended advertising, scan response, and periodic advertising data paths. Snapshot the advertising parameters under hdev->lock, but release the lock before waiting for the controller. Clear advertising-data dirty bits before issuing their commands and restore them after a failure using a fresh lookup. Likewise, update the reported transmit power through a fresh lookup after the parameter command completes. No adv_info pointer then survives an HCI command wait. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||
| CVE-2026-74503 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Clear SNDRV_TIMER_IFLG_DEAD once the close completes snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD and returns early when the flag is already set, but the flag is never cleared again. A completed close ends in remove_slave_links(), which leaves timeri->timer NULL, so a second close is already harmless through the timer == NULL path; the early return can only be reached by an instance that was opened again in between. For such an instance the close unlinks nothing, so snd_timer_instance_free() frees an object that is still on timer->open_list_head, still on snd_timer_master_list if it was opened with a slave key, still owns any adopted slaves, and still holds its timer and module references. snd_seq_timer_open() reopens an instance exactly like that: it retries its fallback open on the same object after a failure that has already run snd_timer_close_locked() internally. An unprivileged user with access to /dev/snd/timer and /dev/snd/seq can force that failure, since snd_timer_check_master() returns -EBUSY when a pending slave matches the new master's (slave_class, slave_id) key and the target timer has reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class = SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a sequencer queue's key can be forged. The freed instance is afterwards dereferenced by any further snd_timer_open() on that timer, by snd_timer_check_slave(), and by /proc/asound/timers, which faults on the stale ti->owner pointer. The flag only has to be visible while the close is in progress, which is all its other users need. Clear it in remove_slave_links(), under the same timer->lock that sets it, once the instance is off every list. | ||||
| CVE-2026-74496 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). | ||||
| CVE-2026-74493 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until termination has finished using the socket. | ||||
| CVE-2026-74492 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: do not update comments from kernel-side hash adds mtype_resize() copies comment pointers with memcpy(), not the comment objects themselves. During the window after an entry has been copied but before the table swap and backlog replay, the old table is still published for packet-side updates while the replacement-table entry already holds the same ip_set_comment_rcu pointer. If xt_SET --add-set ... --exist hits that old entry in this window, mtype_add() calls ip_set_init_comment() even though packet-side adds carry no comment payload. That call frees the shared comment through the old entry, so the replacement-table entry now holds a stale pointer. When the queued add is replayed on the new table, mtype_add() calls ip_set_init_comment() again and strlen() dereferences the stale pointer. Fix this in mtype_add() by skipping ip_set_init_comment() when ext->target marks a packet-side add. Userspace adds still update comments, while packet-side adds can no longer free comment storage shared with a resize copy. | ||||
| CVE-2026-74490 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid use-after-free in poll trace queue dumps TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most queue-dump callsites already serialize that walk under the socket lock or sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(..., TIPC_DUMP_ALL, ...) without holding either lock. That lets the poll trace path reach tipc_list_dump() and backlog head/tail dumping while another context dequeues and frees an skb, leaving the trace helper dereferencing a stale queue entry. Stop the unlocked poll trace site from requesting queue dumps. Other queue dump trace callsites keep their existing output under the locking they already provide, while poll still emits the event itself without walking live queue members from an unlocked context. | ||||
| CVE-2026-74482 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked. | ||||