| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities. |
| Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Hot Standby Router Protocol (HSRP) subsystem of Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to receive potentially sensitive information from an affected device. The vulnerability is due to insufficient memory initialization. An attacker could exploit this vulnerability by receiving HSRPv2 traffic from an adjacent HSRP member. A successful exploit could allow the attacker to receive potentially sensitive information from the adjacent device. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition. |
| A vulnerability in the management API of Cisco Catalyst Center, formerly Cisco DNA Center, could allow an unauthenticated, remote attacker to read and modify the outgoing proxy configuration settings.
This vulnerability is due to the lack of authentication in an API endpoint. An attacker could exploit this vulnerability by sending a request to the affected API of a Catalyst Center device. A successful exploit could allow the attacker to view or modify the outgoing proxy configuration, which could disrupt internet traffic from Cisco Catalyst Center or may allow the attacker to intercept outbound internet traffic. |
| A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to access sensitive information on an affected device.
The vulnerability exists because confidential information is being included in HTTP requests that are exchanged between the user and the device. An attacker could exploit this vulnerability by looking at the raw HTTP requests that are sent to the interface. A successful exploit could allow the attacker to obtain some of the passwords that are configured throughout the interface.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the administrative web-based GUI configuration manager of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access sensitive configuration information. The attacker would require low privilege credentials on an affected device.
This vulnerability exists because of improper encryption of sensitive information stored within the GUI configuration manager. An attacker could exploit this vulnerability by logging into the GUI of Cisco FMC Software and navigating to certain sensitive configurations. A successful exploit could allow the attacker to view sensitive configuration parameters in clear text.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.[[Publication_URL{Layout()}]]This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see . |
| A vulnerability in the administrative web-based GUI configuration manager of Cisco Firepower Management Center Software could allow an authenticated, remote attacker to access sensitive configuration information. The attacker would require low privilege credentials on an affected device.
This vulnerability is due to lack of proper encryption of sensitive information stored within the GUI configuration manager. An attacker could exploit this vulnerability by logging into the FMC GUI and navigating to certain sensitive configurations. A successful exploit could allow the attacker to view sensitive configuration parameters in clear text.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.[[Publication_URL{Layout()}]]This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see . |
| A vulnerability in a certain REST API endpoint of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to perform a path traversal attack on an affected device.
The vulnerability is due to insufficient path restriction enforcement. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to overwrite or list arbitrary files on the affected device.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.There are no workarounds that address this vulnerability. |
| A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application.
The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability. |
| A vulnerability in the Network Configuration Access Control Module (NACM) of Cisco IOS XE Software could allow an authenticated, remote attacker to obtain unauthorized read access to configuration or operational data.
This vulnerability exists because a subtle change in inner API call behavior causes results to be filtered incorrectly. An attacker could exploit this vulnerability by using either NETCONF, RESTCONF, or gRPC Network Management Interface (gNMI) protocols and query data on paths that may have been denied by the NACM configuration. A successful exploit could allow the attacker to access data that should have been restricted according to the NACM configuration.
Note: This vulnerability requires that the attacker obtain the credentials from a valid user with privileges lower than 15, and that NACM was configured to provide restricted read access for that user. |
| A vulnerability in the implementation of the Simple Network Management Protocol Version 3 (SNMPv3) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to poll an affected device using SNMP, even if the device is configured to deny SNMP traffic from an unauthorized source or the SNMPv3 username is removed from the configuration.
This vulnerability exists because of the way that the SNMPv3 configuration is stored in the Cisco IOS Software and Cisco IOS XE Software startup configuration. An attacker could exploit this vulnerability by polling an affected device from a source address that should have been denied. A successful exploit could allow the attacker to perform SNMP operations from a source that should be denied.
Note: The attacker has no control of the SNMPv3 configuration. To exploit this vulnerability, the attacker must have valid SNMPv3 user credentials.
For more information, see the section of this advisory. |
| A vulnerability in the distribution list feature of Cisco Webex Meetings could allow an authenticated, remote attacker to modify a distribution list that belongs to another user of their organization.
The vulnerability is due to insufficient authorization enforcement for requests to update distribution lists. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to modify an existing distribution list. A successful exploit could allow the attacker to modify a distribution list that belongs to a user other than themselves.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the API subsystem and in the web-management interface of Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to access sensitive data.
This vulnerability exists because the web-management interface and certain HTTP-based APIs do not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in certificate validation processing of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an unauthenticated, remote attacker to gain access to sensitive information.
This vulnerability is due to improper validation of certificates that are used by the Smart Licensing feature. An attacker with a privileged network position could exploit this vulnerability by intercepting traffic that is sent over the Internet. A successful exploit could allow the attacker to gain access to sensitive information, including credentials used by the device to connect to Cisco cloud services. |
| A vulnerability in the cluster management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. To be affected by this vulnerability, the vManage software must be in cluster mode.
This vulnerability is due to the absence of authentication for sensitive information in the cluster management interface. An attacker could exploit this vulnerability by sending a crafted request to the cluster management interface of an affected system. A successful exploit could allow the attacker to view sensitive information on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to read arbitrary files on the underlying filesystem of an affected system.
This vulnerability is due to insufficient access control for sensitive information that is written to an affected system. An attacker could exploit this vulnerability by accessing sensitive information that they are not authorized to access on an affected system. A successful exploit could allow the attacker to gain access to devices and other network management systems that they should not have access to.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to create or overwrite arbitrary files on an affected device, which could result in a denial of service (DoS) condition.
The vulnerability is due to insufficient input validation for specific commands. An attacker could exploit this vulnerability by including crafted arguments to those specific commands. A successful exploit could allow the attacker to create or overwrite arbitrary files on the affected device, which could result in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to read arbitrary files on the underlying file system of the device.
This vulnerability is due to insufficient file scope limiting. An attacker could exploit this vulnerability by creating a specific file reference on the file system and then accessing it through the web-based management interface. A successful exploit could allow the attacker to read arbitrary files from the file system of the underlying operating system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
