| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks. |
| The "OpenID Connect Relying Party and OAuth 2.0 Resource Server" (aka mod_auth_openidc) module before 2.1.5 for the Apache HTTP Server does not skip OIDC_CLAIM_ and OIDCAuthNHeader headers in an "OIDCUnAuthAction pass" configuration, which allows remote attackers to bypass authentication via crafted HTTP traffic. |
| It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened. |
| In Apache NiFi before 0.7.2 and 1.x before 1.1.2 in a cluster environment, if an anonymous user request is replicated to another node, the originating node identity is used rather than the "anonymous" user. |
| An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string. |
| An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive. |
| The simple_set_acl function in fs/posix_acl.c in the Linux kernel before 4.9.6 preserves the setgid bit during a setxattr call involving a tmpfs filesystem, which allows local users to gain group privileges by leveraging the existence of a setgid program with restrictions on execute permissions. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-7097. |
| An issue was discovered in Advantech WebAccess Version 8.1. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access pages unrestricted (AUTHENTICATION BYPASS). |
| An Authentication Bypass vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to access limited meeting information on the Cisco WebEx Meetings Server. More Information: CSCvd50728. Known Affected Releases: 2.6 2.7 2.8 CWMS-2.5MR1 Orion1.1.2.patch T29_orion_merge. |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219. |
| Some Huawei smart phones with software Berlin-L21C10B130,Berlin-L21C185B133,Berlin-L21HNC10B131,Berlin-L21HNC185B140,Berlin-L21HNC432B151,Berlin-L22C636B160,Berlin-L22HNC636B130,Berlin-L22HNC675B150CUSTC675D001,Berlin-L23C605B131,Berlin-L24HNC567B110,FRD-L02C432B120,FRD-L02C635B130,FRD-L02C675B170CUSTC675D001,FRD-L04C567B162,FRD-L04C605B131,FRD-L09C10B130,FRD-L09C185B130,FRD-L09C432B131,FRD-L09C636B130,FRD-L14C567B162,FRD-L19C10B130,FRD-L19C432B131,FRD-L19C636B130 have a factory Reset Protection (FRP) bypass security vulnerability. When re-configuring the mobile phone using the factory reset protection (FRP) function, an attacker can login the configuration flow by Swype Keyboard and can perform some operations to update the Google account. As a result, the FRP function is bypassed. |
| Siemens RUGGEDCOM ROX I (all versions) allow an authenticated user to bypass access restrictions in the web interface at port 10000/TCP to obtain privileged file system access or change configuration settings. |
| On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials. |
| The lockscreen on Elephone P9000 devices (running Android 6.0) allows physically proximate attackers to bypass a wrong-PIN lockout feature by pressing backspace after each PIN guess. |
| An insufficient authentication vulnerability on platforms where Junos OS instances are run in a virtualized environment, may allow unprivileged users on the Junos OS instance to gain access to the host operating environment, and thus escalate privileges. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D40 on QFX5110, QFX5200, QFX10002, QFX10008, QFX10016, EX4600 and NFX250; 15.1 prior to 15.1R5 on EX4600; 15.1X49 prior to 15.1X49-D70 on vSRX, SRX1500, SRX4100, SRX4200; 16.1 prior to 16.1R2 on EX4600, ACX5000 series. This issue does not affect vMX. No other Juniper Networks products or platforms are affected by this issue. |
| An insufficient authentication vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow a malicious, network based, unauthenticated attacker to perform privileged actions to gain complete control over the environment. |
| An insufficient authentication vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow an unprivileged, authenticated, user to execute certain specific unprivileged system files capable of causing widespread denials of system services. |
| A vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow a malicious attacker to compromise the systems confidentiality or integrity without authentication, leading to managed systems being compromised or services being denied to authentic end users and systems as a result. |
