| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: remove napi_synchronize() in igb_down()
When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9),
the XSK buffer pool is destroyed but NAPI polling continues.
igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing
napi_complete_done() from clearing NAPI_STATE_SCHED.
igb_down() calls napi_synchronize() before napi_disable() for each queue
vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear,
which never happens. igb_down() blocks indefinitely, the TX watchdog
fires, and the TX queue remains permanently stalled.
napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE.
After a full-budget poll, __napi_poll() checks napi_disable_pending(). If
set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop
that napi_synchronize() cannot.
napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible
panic caused by Rx traffic arrival while interface is down").
napi_disable() provides stronger guarantees: it prevents further
scheduling and waits for any active poll to exit.
Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a
preceding napi_synchronize() in their down paths.
Remove redundant napi_synchronize() call and reorder napi_disable()
before igb_set_queue_napi() so the queue-to-NAPI mapping is only
cleared after polling has fully stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
Switch from using the completion's raw spinlock to a local lock in the
idpf_vc_xn struct. The conversion is safe because complete/_all() are
called outside the lock and there is no reason to share the completion
lock in the current logic. This avoids invalid wait context reported by
the kernel due to the async handler taking BH spinlock:
[ 805.726977] =============================
[ 805.726991] [ BUG: Invalid wait context ]
[ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE
[ 805.727026] -----------------------------
[ 805.727038] kworker/u261:0/572 is trying to lock:
[ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727099] other info that might help us debug this:
[ 805.727111] context-{5:5}
[ 805.727119] 3 locks held by kworker/u261:0/572:
[ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730
[ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730
[ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf]
[ 805.727218] stack backtrace:
...
[ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf]
[ 805.727247] Call Trace:
[ 805.727249] <TASK>
[ 805.727251] dump_stack_lvl+0x77/0xb0
[ 805.727259] __lock_acquire+0xb3b/0x2290
[ 805.727268] ? __irq_work_queue_local+0x59/0x130
[ 805.727275] lock_acquire+0xc6/0x2f0
[ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727284] ? _printk+0x5b/0x80
[ 805.727290] _raw_spin_lock_bh+0x38/0x50
[ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf]
[ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf]
[ 805.727317] process_one_work+0x226/0x730
[ 805.727322] worker_thread+0x19e/0x340
[ 805.727325] ? __pfx_worker_thread+0x10/0x10
[ 805.727328] kthread+0xf4/0x130
[ 805.727333] ? __pfx_kthread+0x10/0x10
[ 805.727336] ret_from_fork+0x32c/0x410
[ 805.727345] ? __pfx_kthread+0x10/0x10
[ 805.727347] ret_from_fork_asm+0x1a/0x30
[ 805.727354] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. |
| A flaw was found in sssd. A local user can cause a Denial of Service (DoS) by exhausting the responder service's available file descriptors (system handles used for open connections). By opening and maintaining many concurrent connections to a responder socket while continuing to queue new connection attempts, an attacker can trigger an unthrottled retry loop. This condition leads to high CPU utilization and stalls the service, preventing legitimate identity and authentication requests from being processed. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix potential deadlock in cpu hotplug with osnoise
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: register phy led_triggers during probe to avoid AB-BA deadlock
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcp251x: fix deadlock in error path of mcp251x_open
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| P-Net before 1.0.3 enters an infinite loop when handling a read request for the PDPortDataCheck record with subslot 0 (whole module). The loop over the ports never advanced to the next port, so the request never completes and the device stops responding. A remote unauthenticated attacker can use this to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: add cluster chain loop check for dir
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent infinite loop in rt6_nlmsg_size()
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_info_uses_dev()
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Don't register LEDs for genphy
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them. |
| A flaw was found in libcupsfilters. The cfIEEE1284NormalizeMakeModel() function enters an infinite loop when processing a printer-advertised IEEE-1284 device ID with an empty model field, causing sustained CPU consumption. A network-adjacent attacker could exploit this by broadcasting a specially crafted printer advertisement, leading to denial of service. |
