Export limit exceeded: 204091 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 204091 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (988 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23186 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify() The acpi_power_meter driver's .notify() callback function, acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock that is also acquired by callbacks in sysfs attributes of the device being unregistered which is prone to deadlocks between sysfs access and device removal. Address this by moving the hwmon device removal in acpi_power_meter_notify() outside the lock in question, but notice that doing it alone is not sufficient because two concurrent METER_NOTIFY_CONFIG notifications may be attempting to remove the same device at the same time. To prevent that from happening, add a new lock serializing the execution of the switch () statement in acpi_power_meter_notify(). For simplicity, it is a static mutex which should not be a problem from the performance perspective. The new lock also allows the hwmon_device_register_with_info() in acpi_power_meter_notify() to be called outside the inner lock because it prevents the other notifications handled by that function from manipulating the "resource" object while the hwmon device based on it is being registered. The sending of ACPI netlink messages from acpi_power_meter_notify() is serialized by the new lock too which generally helps to ensure that the order of handling firmware notifications is the same as the order of sending netlink messages related to them. In addition, notice that hwmon_device_register_with_info() may fail in which case resource->hwmon_dev will become an error pointer, so add checks to avoid attempting to unregister the hwmon device pointer to by it in that case to acpi_power_meter_notify() and acpi_power_meter_remove(). | ||||
| CVE-2026-23157 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already (either globally or within a cgroup of the running task), we will not let the task exit from balance_dirty_pages() until the number of dirty pages drops below the limit. So in this particular case, as I already mentioned, there was a cgroup with relatively small amount of memory and as a result with dirty limit set at 16MB. A task from that cgroup has dirtied about 28MB worth of pages in btrfs btree inode and these were practically the only dirty pages in that cgroup. So that means the only way to reduce the dirty pages of that cgroup is to writeback the dirty pages of btrfs btree inode, and only after that those processes can exit balance_dirty_pages(). Now back to the btrfs part, btree_writepages() is responsible for writing back dirty btree inode pages. The problem here is, there is a btrfs internal threshold that if the btree inode's dirty bytes are below the 32M threshold, it will not do any writeback. This behavior is to batch as much metadata as possible so we won't write back those tree blocks and then later re-COW them again for another modification. This internal 32MiB is higher than the existing dirty page size (28MiB), meaning no writeback will happen, causing a deadlock between btrfs and cgroup: - Btrfs doesn't want to write back btree inode until more dirty pages - Cgroup/MM doesn't want more dirty pages for btrfs btree inode Thus any process touching that btree inode is put into sleep until the number of dirty pages is reduced. Thanks Jan Kara a lot for the analysis of the root cause. [ENHANCEMENT] Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the btree_inode"), btrfs btree inode pages will only be charged to the root cgroup which should have a much larger limit than btrfs' 32MiB threshold. So it should not affect newer kernels. But for all current LTS kernels, they are all affected by this problem, and backporting the whole AS_KERNEL_FILE may not be a good idea. Even for newer kernels I still think it's a good idea to get rid of the internal threshold at btree_writepages(), since for most cases cgroup/MM has a better view of full system memory usage than btrfs' fixed threshold. For internal callers using btrfs_btree_balance_dirty() since that function is already doing internal threshold check, we don't need to bother them. But for external callers of btree_writepages(), just respect their requests and write back whatever they want, ignoring the internal btrfs threshold to avoid such deadlock on btree inode dirty page balancing. | ||||
| CVE-2026-23130 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dead lock while flushing management frames Commit [1] converted the management transmission work item into a wiphy work. Since a wiphy work can only run under wiphy lock protection, a race condition happens in below scenario: 1. a management frame is queued for transmission. 2. ath12k_mac_op_flush() gets called to flush pending frames associated with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush() the process waits for the transmission done. 3. Since wiphy lock has been taken by the flush process, the transmission work item has no chance to run, hence the dead lock. >From user view, this dead lock results in below issue: wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticated wlp8s0: associate with xxxxxx (try 1/3) wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING) ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1 The dead lock can be avoided by invoking wiphy_work_flush() to proactively run the queued work item. Note actually it is already present in ath12k_mac_op_flush(), however it does not protect the case where vif being NULL. Hence move it ahead to cover this case as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2025-71315 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Convert to DRM's vblank timer Replace vkms' vblank timer with the DRM implementation. The DRM code is identical in concept, but differs in implementation. Vblank timers are covered in vblank helpers and initializer macros, so remove the corresponding hrtimer in struct vkms_output. The vblank timer calls vkms' custom timeout code via handle_vblank_timeout in struct drm_crtc_helper_funcs. | ||||
| CVE-2025-71117 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Remove queue freezing from several sysfs store callbacks Freezing the request queue from inside sysfs store callbacks may cause a deadlock in combination with the dm-multipath driver and the queue_if_no_path option. Additionally, freezing the request queue slows down system boot on systems where sysfs attributes are set synchronously. Fix this by removing the blk_mq_freeze_queue() / blk_mq_unfreeze_queue() calls from the store callbacks that do not strictly need these callbacks. Add the __data_racy annotation to request_queue.rq_timeout to suppress KCSAN data race reports about the rq_timeout reads. This patch may cause a small delay in applying the new settings. For all the attributes affected by this patch, I/O will complete correctly whether the old or the new value of the attribute is used. This patch affects the following sysfs attributes: * io_poll_delay * io_timeout * nomerges * read_ahead_kb * rq_affinity Here is an example of a deadlock triggered by running test srp/002 if this patch is not applied: task:multipathd Call Trace: <TASK> __schedule+0x8c1/0x1bf0 schedule+0xdd/0x270 schedule_preempt_disabled+0x1c/0x30 __mutex_lock+0xb89/0x1650 mutex_lock_nested+0x1f/0x30 dm_table_set_restrictions+0x823/0xdf0 __bind+0x166/0x590 dm_swap_table+0x2a7/0x490 do_resume+0x1b1/0x610 dev_suspend+0x55/0x1a0 ctl_ioctl+0x3a5/0x7e0 dm_ctl_ioctl+0x12/0x20 __x64_sys_ioctl+0x127/0x1a0 x64_sys_call+0xe2b/0x17d0 do_syscall_64+0x96/0x3a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> task:(udev-worker) Call Trace: <TASK> __schedule+0x8c1/0x1bf0 schedule+0xdd/0x270 blk_mq_freeze_queue_wait+0xf2/0x140 blk_mq_freeze_queue_nomemsave+0x23/0x30 queue_ra_store+0x14e/0x290 queue_attr_store+0x23e/0x2c0 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3b2/0x630 vfs_write+0x4fd/0x1390 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x276/0x17d0 do_syscall_64+0x96/0x3a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2025-68223 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: delete radeon_fence_process in is_signaled, no deadlock Delete the attempt to progress the queue when checking if fence is signaled. This avoids deadlock. dma-fence_ops::signaled can be called with the fence lock in unknown state. For radeon, the fence lock is also the wait queue lock. This can cause a self deadlock when signaled() tries to make forward progress on the wait queue. But advancing the queue is unneeded because incorrectly returning false from signaled() is perfectly acceptable. (cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db) | ||||
| CVE-2025-39782 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: prevent softlockup in jbd2_log_do_checkpoint() Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list() periodically release j_list_lock after processing a batch of buffers to avoid long hold times on the j_list_lock. However, since both functions contend for j_list_lock, the combined time spent waiting and processing can be significant. jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when need_resched() is true to avoid softlockups during prolonged operations. But jbd2_log_do_checkpoint() only exits its loop when need_resched() is true, relying on potentially sleeping functions like __flush_batch() or wait_on_buffer() to trigger rescheduling. If those functions do not sleep, the kernel may hit a softlockup. watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373] CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10 Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017 Workqueue: writeback wb_workfn (flush-7:2) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : native_queued_spin_lock_slowpath+0x358/0x418 lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] Call trace: native_queued_spin_lock_slowpath+0x358/0x418 jbd2_log_do_checkpoint+0x31c/0x438 [jbd2] __jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2] add_transaction_credits+0x3bc/0x418 [jbd2] start_this_handle+0xf8/0x560 [jbd2] jbd2__journal_start+0x118/0x228 [jbd2] __ext4_journal_start_sb+0x110/0x188 [ext4] ext4_do_writepages+0x3dc/0x740 [ext4] ext4_writepages+0xa4/0x190 [ext4] do_writepages+0x94/0x228 __writeback_single_inode+0x48/0x318 writeback_sb_inodes+0x204/0x590 __writeback_inodes_wb+0x54/0xf8 wb_writeback+0x2cc/0x3d8 wb_do_writeback+0x2e0/0x2f8 wb_workfn+0x80/0x2a8 process_one_work+0x178/0x3e8 worker_thread+0x234/0x3b8 kthread+0xf0/0x108 ret_from_fork+0x10/0x20 So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid softlockup. | ||||
| CVE-2025-39736 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock When netpoll is enabled, calling pr_warn_once() while holding kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock inversion with the netconsole subsystem. This occurs because pr_warn_once() may trigger netpoll, which eventually leads to __alloc_skb() and back into kmemleak code, attempting to reacquire kmemleak_lock. This is the path for the deadlock. mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags); Fix this by setting a flag and issuing the pr_warn_once() after kmemleak_lock is released. | ||||
| CVE-2026-102280 | 1 Sandboxie-plus | 1 Sandboxie | 2026-11-05 | N/A |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. Prior to 1.18.6, a process inside a sandbox could send MSGID_FILE_SET_ATTRIBUTES or MSGID_FILE_SET_SHORT_NAME to SbieSvc and cause the SYSTEM service to open and modify an existing file outside the sandbox. The direct primitive changes file attributes, timestamps, writeability, or 8.3 short names; a short-name redirection can additionally contribute to SYSTEM code execution when a privileged process resolves an attacker-controlled short-name path in a location SbieSvc can open. This vulnerability is fixed in 1.18.6. | ||||
| CVE-2025-38521 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix kernel crash when hard resetting the GPU The GPU hard reset sequence calls pm_runtime_force_suspend() and pm_runtime_force_resume(), which according to their documentation should only be used during system-wide PM transitions to sleep states. The main issue though is that depending on some internal runtime PM state as seen by pm_runtime_force_suspend() (whether the usage count is <= 1), pm_runtime_force_resume() might not resume the device unless needed. If that happens, the runtime PM resume callback pvr_power_device_resume() is not called, the GPU clocks are not re-enabled, and the kernel crashes on the next attempt to access GPU registers as part of the power-on sequence. Replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to the driver's runtime PM callbacks, pvr_power_device_suspend() and pvr_power_device_resume(), to ensure clocks are re-enabled and avoid the kernel crash. | ||||
| CVE-2025-38436 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/scheduler: signal scheduled fence when kill job When an entity from application B is killed, drm_sched_entity_kill() removes all jobs belonging to that entity through drm_sched_entity_kill_jobs_work(). If application A's job depends on a scheduled fence from application B's job, and that fence is not properly signaled during the killing process, application A's dependency cannot be cleared. This leads to application A hanging indefinitely while waiting for a dependency that will never be resolved. Fix this issue by ensuring that scheduled fences are properly signaled when an entity is killed, allowing dependent applications to continue execution. | ||||
| CVE-2025-38359 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix in_atomic() handling in do_secure_storage_access() Kernel user spaces accesses to not exported pages in atomic context incorrectly try to resolve the page fault. With debug options enabled call traces like this can be seen: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. Preemption disabled at: [<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0 CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39 Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT Tainted: [W]=WARN Hardware name: IBM 3931 A01 703 (LPAR) Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0 ([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90 INFO: lockdep is turned off. It is not allowed to take the mmap_lock while in atomic context. Therefore handle such a secure storage access fault as if the accessed page is not mapped: the uaccess function will return -EFAULT, and the caller has to deal with this. Usually this means that the access is retried in process context, which allows to resolve the page fault (or in this case export the page). | ||||
| CVE-2025-38353 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix taking invalid lock on wedge If device wedges on e.g. GuC upload, the submission is not yet enabled and the state is not even initialized. Protect the wedge call so it does nothing in this case. It fixes the following splat: [] xe 0000:bf:00.0: [drm] device wedged, needs recovery [] ------------[ cut here ]------------ [] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60 ... [] RIP: 0010:__mutex_lock+0x8a1/0xe60 [] mutex_lock_nested+0x1b/0x30 [] xe_guc_submit_wedge+0x80/0x2b0 [xe] | ||||
| CVE-2025-38335 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context. | ||||
| CVE-2025-38311 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iavf: get rid of the crit lock Get rid of the crit lock. That frees us from the error prone logic of try_locks. Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were protected by it already - replace crit lock by netdev lock when it was not the case. Lockdep reports that we should cancel the work under crit_lock [splat1], and that was the scheme we have mostly followed since [1] by Slawomir. But when that is done we still got into deadlocks [splat2]. So instead we should look at the bigger problem, namely "weird locking/scheduling" of the iavf. The first step to fix that is to remove the crit lock. I will followup with a -next series that simplifies scheduling/tasks. Cancel the work without netdev lock (weird unlock+lock scheme), to fix the [splat2] (which would be totally ugly if we would kept the crit lock). Extend protected part of iavf_watchdog_task() to include scheduling more work. Note that the removed comment in iavf_reset_task() was misplaced, it belonged to inside of the removed if condition, so it's gone now. [splat1] - w/o this patch - The deadlock during VF removal: WARNING: possible circular locking dependency detected sh/3825 is trying to acquire lock: ((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470 but task is already holding lock: (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf] which lock already depends on the new lock. [splat2] - when cancelling work under crit lock, w/o this series, see [2] for the band aid attempt WARNING: possible circular locking dependency detected sh/3550 is trying to acquire lock: ((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: (&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf] which lock already depends on the new lock. [1] fc2e6b3b132a ("iavf: Rework mutexes for better synchronisation") [2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a | ||||
| CVE-2025-38302 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work Bios queued up in the zone write plug have already gone through all all preparation in the submit_bio path, including the freeze protection. Submitting them through submit_bio_noacct_nocheck duplicates the work and can can cause deadlocks when freezing a queue with pending bio write plugs. Go straight to ->submit_bio or blk_mq_submit_bio to bypass the superfluous extra freeze protection and checks. | ||||
| CVE-2025-38268 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: move tcpm_queue_vdm_unlocked to asynchronous work A state check was previously added to tcpm_queue_vdm_unlocked to prevent a deadlock where the DisplayPort Alt Mode driver would be executing work and attempting to grab the tcpm_lock while the TCPM was holding the lock and attempting to unregister the altmode, blocking on the altmode driver's cancel_work_sync call. Because the state check isn't protected, there is a small window where the Alt Mode driver could determine that the TCPM is in a ready state and attempt to grab the lock while the TCPM grabs the lock and changes the TCPM state to one that causes the deadlock. The callstack is provided below: [110121.667392][ C7] Call trace: [110121.667396][ C7] __switch_to+0x174/0x338 [110121.667406][ C7] __schedule+0x608/0x9f0 [110121.667414][ C7] schedule+0x7c/0xe8 [110121.667423][ C7] kernfs_drain+0xb0/0x114 [110121.667431][ C7] __kernfs_remove+0x16c/0x20c [110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8 [110121.667442][ C7] sysfs_remove_group+0x84/0xe8 [110121.667450][ C7] sysfs_remove_groups+0x34/0x58 [110121.667458][ C7] device_remove_groups+0x10/0x20 [110121.667464][ C7] device_release_driver_internal+0x164/0x2e4 [110121.667475][ C7] device_release_driver+0x18/0x28 [110121.667484][ C7] bus_remove_device+0xec/0x118 [110121.667491][ C7] device_del+0x1e8/0x4ac [110121.667498][ C7] device_unregister+0x18/0x38 [110121.667504][ C7] typec_unregister_altmode+0x30/0x44 [110121.667515][ C7] tcpm_reset_port+0xac/0x370 [110121.667523][ C7] tcpm_snk_detach+0x84/0xb8 [110121.667529][ C7] run_state_machine+0x4c0/0x1b68 [110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4 [110121.667544][ C7] kthread_worker_fn+0x10c/0x244 [110121.667552][ C7] kthread+0x104/0x1d4 [110121.667557][ C7] ret_from_fork+0x10/0x20 [110121.667689][ C7] Workqueue: events dp_altmode_work [110121.667697][ C7] Call trace: [110121.667701][ C7] __switch_to+0x174/0x338 [110121.667710][ C7] __schedule+0x608/0x9f0 [110121.667717][ C7] schedule+0x7c/0xe8 [110121.667725][ C7] schedule_preempt_disabled+0x24/0x40 [110121.667733][ C7] __mutex_lock+0x408/0xdac [110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24 [110121.667748][ C7] mutex_lock+0x40/0xec [110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4 [110121.667764][ C7] typec_altmode_enter+0xdc/0x10c [110121.667769][ C7] dp_altmode_work+0x68/0x164 [110121.667775][ C7] process_one_work+0x1e4/0x43c [110121.667783][ C7] worker_thread+0x25c/0x430 [110121.667789][ C7] kthread+0x104/0x1d4 [110121.667794][ C7] ret_from_fork+0x10/0x20 Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work, which can perform the state check while holding the TCPM lock while the Alt Mode lock is no longer held. This requires a new struct to hold the vdm data, altmode_vdm_event. | ||||
| CVE-2025-37967 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix deadlock This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector mutex is only locked if a connection is established and the partner pointer is valid. This resolves a deadlock scenario where ucsi_displayport_remove_partner holds con->mutex waiting for dp_altmode_work to complete while dp_altmode_work attempts to acquire it. | ||||
| CVE-2025-37940 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Add cond_resched() to ftrace_graph_set_hash() When the kernel contains a large number of functions that can be traced, the loop in ftrace_graph_set_hash() may take a lot of time to execute. This may trigger the softlockup watchdog. Add cond_resched() within the loop to allow the kernel to remain responsive even when processing a large number of functions. This matches the cond_resched() that is used in other locations of the code that iterates over all functions that can be traced. | ||||
| CVE-2025-37907 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix locking order in ivpu_job_submit Fix deadlock in job submission and abort handling. When a thread aborts currently executing jobs due to a fault, it first locks the global lock protecting submitted_jobs (#1). After the last job is destroyed, it proceeds to release the related context and locks file_priv (#2). Meanwhile, in the job submission thread, the file_priv lock (#2) is taken first, and then the submitted_jobs lock (#1) is obtained when a job is added to the submitted jobs list. CPU0 CPU1 ---- ---- (for example due to a fault) (jobs submissions keep coming) lock(&vdev->submitted_jobs_lock) #1 ivpu_jobs_abort_all() job_destroy() lock(&file_priv->lock) #2 lock(&vdev->submitted_jobs_lock) #1 file_priv_release() lock(&vdev->context_list_lock) lock(&file_priv->lock) #2 This order of locking causes a deadlock. To resolve this issue, change the order of locking in ivpu_job_submit(). | ||||