| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer builds the command line of the external docling tool and appends to it the custom arguments supplied in the CamelDoclingCustomArguments header, a list of strings whose flags the fix for CVE-2026-40047 restricted to an allowlist. That fix also introduced validatePathSafety to keep path-like argument values inside the intended directory, but the method only looked for relative traversal: it rejected a value containing a traversal sequence such as ../ and a value whose normalized form still held a .. element. It never checked whether a value was an absolute path, and an absolute path without traversal segments contains neither, so it passed unchanged. Every path-like value went through this check, whether it was a separate list element following its flag or was attached to the flag after an equals sign, so an absolute path was accepted in either form, for example as the directory given to the allowlisted --artifacts-path flag, which tells docling where to find its model artifacts. Such a value reached the docling command line as given, so a party able to choose the custom arguments could point the docling process at any directory the Camel process can access, outside the working directory that the check was meant to keep path values in, which is the outcome the CVE-2026-40047 fix set out to prevent. Only the CLI mode, which is the default, passes custom arguments to docling. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingCustomArguments header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the custom arguments. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| Authenticated Path Traversal in Catalog Image Management allows writing image files outside the intended directory in Apache OFBiz.
This issue affects Apache OFBiz: before 24.09.08.
Users are recommended to upgrade to version 24.09.08, which fixes the issue. |
| Improper Control of Resource Identifiers ('Resource Injection') vulnerability in Apache OFBiz.
An authenticate user with access to sfa component can override the service to use on vcard import and access to other service.
This issue affects Apache OFBiz: before 24.09.08.
Users are recommended to upgrade to version 24.09.08, which fixes the issue. |
| Default startup profile miss security settings in Apache Kylin. Any deployment has security setting profile turned on does not impact.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. |
| Deserialization of Untrusted Data vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. |
| Missing Authorization vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
An unauthenticated or unauthorized user can retrieve the invited-user list associated with a non-public question due to missing visibility authorization checks.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component.
This issue affects Apache Camel: from 4.21.0 before 4.22.2.
WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap. |
| Missing Authorization vulnerability in Apache Answer.
This issue affects Apache Answer: through 2.0.2.
An authorization flaw in the MCP answer retrieval tool allows holders of a global API key to access answer content associated with hidden, deleted, or pending-review questions.
Users are recommended to upgrade to version 2.0.3, which fixes the issue. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| Cross-Site Request Forgery (CSRF) vulnerability in Apache Camel OAuth component.
This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1.
The authorization code callback did not carry a state parameter binding it to the authorization request that started the flow, and the callback did not verify one. An authorization code obtained in any browser could therefore be redeemed at the callback and associated with whichever session presented it, which is login cross-site request forgery: a victim can be silently signed in as an identity the attacker controls, so that actions the victim then performs, and data they then submit, land in the attacker's account. The same unvalidated callback handling also allowed the post-authentication redirect target to be influenced, giving an open redirect from a trusted origin. The state check runs before the authorization code is redeemed, so these paths are reachable without any interaction with the identity provider.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The authorization request now issues a state value bound to the session, and the callback rejects a request whose state is absent or does not match, stopping the route with a 400 response. For deployments that cannot upgrade immediately, terminate the authorization code flow in a component that performs its own state binding rather than relying on the Camel callback. Note that after upgrading, a deployment behind a proxy that drops or rewrites the callback query string will begin to see 400 responses, because the state parameter must survive the round trip. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Apache Commons BCEL.
This only happens when you're using Class2HTML to generate webpages for possibly-attacker-controlled class files, where Class2HTML emitters write attacker class-file strings into HTML unescaped (stored XSS in reports).
This issue affects Apache Commons BCEL: before 6.13.0.
Users are recommended to upgrade to version 6.13.0, which fixes the issue. |
| Apache Airflow's Teradata provider embedded cloud storage credentials directly into SQL statements. `S3ToTeradataOperator` and `AzureBlobStorageToTeradataOperator` interpolate the source bucket's credentials as plain string literals into the `CREATE MULTISET TABLE ... LOCATION` statement whenever the bucket is private and no `teradata_authorization_name` is configured — which is the default credential path for both operators. The statement is then logged and executed, so the credentials reach two places outside the operator's control.
The two operators expose different credentials through different channels, and deployments should check both. `S3ToTeradataOperator` takes its values from `s3_hook.get_credentials()`, which under an instance profile or IRSA returns runtime AWS credentials that were never registered with Airflow's secrets masker — and the STS session token is runtime-generated and therefore unmasked even when an AWS connection is configured. Those credentials appear **in the Airflow task log**, readable by any user with log-view permission on the Dag. `AzureBlobStorageToTeradataOperator` takes its storage account key from the connection, so the masker usually redacts the task-log copy; its exposure is the Teradata side. **Both** operators write the credentials into Teradata's DBQL query logs and live monitoring views, where Airflow's masking never applies and the values persist for that system's log retention period.
Affects deployments using either operator against a private bucket or container without a Teradata `AUTHORIZATION` object. Users are advised to upgrade to `apache-airflow-providers-teradata` `3.7.0` or later, which keeps the credential-bearing statement out of the Airflow task log. Upgrading does not remove the credentials from Teradata's query logs and monitoring views, which Airflow cannot redact: users should configure `teradata_authorization_name` with a Teradata `AUTHORIZATION` object so that credentials are never inlined, and should rotate any credentials previously used through the inline path. |
| A NULL pointer dereference in mod_xml2enc in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an untrusted backend server to cause a denial of service via a proxied response with a charset whose conversion partially succeeds then fails.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Authentication bypass by capture-replay in mod_auth_digest in Apache Software Foundation Apache HTTP Server 2.4.x on all platforms allows a man-in-the-middle (MITM) attacker to replay captured digest authentication credentials via crafted requests that trigger garbage collection of the client's shared memory entry when AuthDigestNonceLifetime is set to 0.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Use after free in mod_auth_digest in Apache Software Foundation Apache HTTP Server before 2.4.69 on all platforms allows an unauthenticated remote client to cause authentication state corruption via concurrent Digest authentication requests when AuthDigestNcCheck is enabled or AuthDigestNonceLifetime is set to 0.
Users are recommended to upgrade to version 2.4.69, which fixes this issue. |
| Integer overflow in mod_dav_fs in Apache HTTP Server through 2.4.68 allows an authenticated WebDAV client with write access to crash worker processes and persistently corrupt a directory's property database via PROPPATCH requests declaring many XML namespaces. |
