| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out of bounds punch offset
Punching a hole with a start offset that exceeds max_end is not
permitted and will result in a negative length in the
truncate_inode_partial_folio() function while truncating the page cache,
potentially leading to undesirable consequences.
A simple reproducer:
truncate -s 9895604649994 /mnt/foo
xfs_io -c "pwrite 8796093022208 4096" /mnt/foo
xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo
kernel BUG at include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110
RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287
RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000
RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000
RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000
R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005
R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000
FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
truncate_inode_partial_folio+0x3dd/0x620
truncate_inode_pages_range+0x226/0x720
? bdev_getblk+0x52/0x3e0
? ext4_get_group_desc+0x78/0x150
? crc32c_arch+0xfd/0x180
? __ext4_get_inode_loc+0x18c/0x840
? ext4_inode_csum+0x117/0x160
? jbd2_journal_dirty_metadata+0x61/0x390
? __ext4_handle_dirty_metadata+0xa0/0x2b0
? kmem_cache_free+0x90/0x5a0
? jbd2_journal_stop+0x1d5/0x550
? __ext4_journal_stop+0x49/0x100
truncate_pagecache_range+0x50/0x80
ext4_truncate_page_cache_block_range+0x57/0x3a0
ext4_punch_hole+0x1fe/0x670
ext4_fallocate+0x792/0x17d0
? __count_memcg_events+0x175/0x2a0
vfs_fallocate+0x121/0x560
ksys_fallocate+0x51/0xc0
__x64_sys_fallocate+0x24/0x40
x64_sys_call+0x18d2/0x4170
do_syscall_64+0xa7/0x220
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by filtering out cases where the punching start offset exceeds
max_end. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info)
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache)
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Fix OOB memory read access in KUnit test
KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(),
because the source string length was rounded up to the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
trace_spmi_write_begin() and trace_spmi_read_end() both call
memcpy() with a length of "len + 1". This leads to one extra
byte being read beyond the end of the specified buffer. Fix
this out-of-bound memory access by using a length of "len"
instead.
Here is a KASAN log showing the issue:
BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234
Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314
...
Call trace:
dump_backtrace+0x0/0x3e8
show_stack+0x2c/0x3c
dump_stack_lvl+0xdc/0x11c
print_address_description+0x74/0x384
kasan_report+0x188/0x268
kasan_check_range+0x270/0x2b0
memcpy+0x90/0xe8
trace_event_raw_event_spmi_read_end+0x1d0/0x234
spmi_read_cmd+0x294/0x3ac
spmi_ext_register_readl+0x84/0x9c
regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi]
_regmap_raw_read+0x40c/0x754
regmap_raw_read+0x3a0/0x514
regmap_bulk_read+0x418/0x494
adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3]
...
__arm64_sys_read+0x4c/0x60
invoke_syscall+0x80/0x218
el0_svc_common+0xec/0x1c8
...
addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame:
adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3]
this frame has 1 object:
[32, 33) 'status'
Memory state around the buggy address:
ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00
^
ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d |
| A buffer overflow vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `global.so` binary. The `getSaveConfig` function retrieves the `http_host` parameter from user input via `websGetVar` and copies it into a fixed-size stack buffer (`v13`) using `strcpy()` without performing any length checks. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted HTTP request to the router's web interface, potentially leading to arbitrary code execution. |
| A stack buffer overflow exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary (sub_401EE0 function). The binary reads the /proc/stat file using fgets() into a local buffer and subsequently parses the line using sscanf() into a single-byte variable with the %s format specifier. Maliciously crafted /proc/stat content can overwrite adjacent stack memory, potentially allowing an attacker with filesystem write privileges to execute arbitrary code on the device. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix get_nodes out of bound access
When user specified more nodes than supported, get_nodes will access nmask
array out of bounds. |
| A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution. |
| A stack-based buffer overflow exists in the validate_static_route function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function improperly concatenates user-supplied CGI parameters (route_ipaddr_0~3, route_netmask_0~3, route_gateway_0~3) into fixed-size buffers (v6, v10, v14) without proper bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack-based buffer overflow vulnerability exists in the libshared.so library of Cisco Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The functions get_mac_from_ip and get_ip_from_mac use sscanf with overly permissive "%100s" format specifiers to parse entries from /proc/net/arp into fixed-size buffers (v6: 50 bytes, v7 sub-arrays: 50 bytes). This allows local attackers controlling the contents of /proc/net/arp to overflow stack buffers, leading to memory corruption, denial of service, or potential arbitrary code execution. |
| A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack buffer overflow vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin in the rc binary's USB storage handling module. The vulnerability occurs when the "Serial Number" field from a USB device is read via sscanf into a 64-byte stack buffer, while fgets reads up to 127 bytes, causing a stack overflow. An attacker with physical access or control over a USB device can exploit this vulnerability to potentially execute arbitrary code on the device. |
| A stack buffer overflow vulnerability exists in the D-Link DIR-816A2 router firmware DIR-816A2_FWv1.10CNB05_R1B011D88210.img in the upload.cgi module, which handles firmware version information. The vulnerability occurs because /proc/version is read into a 512-byte buffer and then concatenated using sprintf() into another 512-byte buffer containing a 29-byte constant. Input exceeding 481 bytes triggers a stack buffer overflow, allowing an attacker who can control /proc/version content to potentially execute arbitrary code on the device. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Prevent out-of-bounds access
The while loop in raspberrypi_discover_clocks() relies on the assumption
that the id of the last clock element is zero. Because this data comes
from the Videocore firmware and it doesn't guarantuee such a behavior
this could lead to out-of-bounds access. So fix this by providing
a sentinel element. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix array out of bounds access
The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.
Example kernel oops:
[ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[ 807.987369] Mem abort info:
[ 807.987398] ESR = 0x96000005
[ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits
[ 807.987477] SET = 0, FnV = 0
[ 807.987507] EA = 0, S1PTW = 0
[ 807.987536] FSC = 0x05: level 1 translation fault
[ 807.987570] Data abort info:
[ 807.987763] ISV = 0, ISS = 0x00000005
[ 807.987801] CM = 0, WnR = 0
[ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575
[ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[ 807.988691] sp : ffffffc008cf3bd0
[ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[ 807.989084] Call trace:
[ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[ 807.989199] cur_state_store+0x84/0xd0
[ 807.989221] dev_attr_store+0x20/0x38
[ 807.989262] sysfs_kf_write+0x4c/0x60
[ 807.989282] kernfs_fop_write_iter+0x130/0x1c0
[ 807.989298] new_sync_write+0x10c/0x190
[ 807.989315] vfs_write+0x254/0x378
[ 807.989362] ksys_write+0x70/0xf8
[ 807.989379] __arm64_sys_write+0x24/0x30
[ 807.989424] invoke_syscall+0x4c/0x110
[ 807.989442] el0_svc_common.constprop.3+0xfc/0x120
[ 807.989458] do_el0_svc+0x2c/0x90
[ 807.989473] el0_svc+0x24/0x60
[ 807.989544] el0t_64_sync_handler+0x90/0xb8
[ 807.989558] el0t_64_sync+0x1a0/0x1a4
[ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[ 807.989627] ---[ end t
---truncated--- |
| A maliciously crafted PSD file, when linked or imported into Autodesk 3ds Max, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
