| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP before 3.32.2 contains an improper certificate validation vulnerability in tls_verify_certificate() that accepts Common Name fallback despite non-matching SAN entries and matches IP literals against DNS strings. Man-in-the-middle attackers holding a certificate from a client-trusted CA can bypass server identity checks to intercept RDP sessions, including keystrokes, clipboard, and screen content. |
| Improper certificate validation in Visual Studio allows an unauthorized attacker to perform spoofing over a network. |
| Improper Validation of Certificate with Host Mismatch vulnerability in deadtrickster ssl_verify_fun allows an adversary in the middle to impersonate a TLS peer via a certificate that carries a partial-label wildcard. try_match_wildcard/4 in src/ssl_verify_hostname.erl anchors only the text before and after the * of an identifier such as f*.example.net, so the wildcard also consumes dots and the certificate is accepted for f.evil.example.net. RFC 6125 confines a wildcard to the left-most label. The same matcher lets *.168.1.1 match the IP literal 192.168.1.1. Whole-label wildcards are matched correctly.
Erlang/OTP 20.0 and later check the hostname in ssl before a user verify_fun sees valid_peer, so a client that keeps server_name_indication set rejects the mismatch regardless. Exposed are clients that disable SNI, servers that verify client certificate hostnames with this library, and direct callers of verify_cert_hostname/2.
This issue affects ssl_verify_fun: from 1.0.1 before 1.1.8. |
| OpenSSL has internal defaults for a directory tree where it can find a configuration file as well as certificates used for verification in TLS. This directory is most commonly referred to as OPENSSLDIR, and is configurable with the --prefix / --openssldir configuration options. For OpenSSL versions 1.1.0 and 1.1.1, the mingw configuration targets assume that resulting programs and libraries are installed in a Unix-like environment and the default prefix for program installation as well as for OPENSSLDIR should be '/usr/local'. However, mingw programs are Windows programs, and as such, find themselves looking at sub-directories of 'C:/usr/local', which may be world writable, which enables untrusted users to modify OpenSSL's default configuration, insert CA certificates, modify (or even replace) existing engine modules, etc. For OpenSSL 1.0.2, '/usr/local/ssl' is used as default for OPENSSLDIR on all Unix and Windows targets, including Visual C builds. However, some build instructions for the diverse Windows targets on 1.0.2 encourage you to specify your own --prefix. OpenSSL versions 1.1.1, 1.1.0 and 1.0.2 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, node-forge parsed deprecated extension OIDs 2.5.29.10 and 2.5.29.13 as basicConstraints, and pki.verifyCertificateChain() used the first extension with that name. Exploitation requires a CA trusted by the application to issue a certificate carrying an attacker-supplied deprecated-OID extension, commonly because the CA copies extensions from a certificate signing request. By placing a permissive deprecated extension before the genuine 2.5.29.19 basicConstraints extension, the certificate holder could have the certificate accepted as a CA and issue certificates for arbitrary names, enabling server or client impersonation. If the issuing CA adds a keyUsage extension without keyCertSign, node-forge rejects the chain. This issue is fixed in version 1.4.1. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, improper verification of cryptographic signatures and improper certificate validation in RadPdfProcessing digital signature validation allow an unauthenticated attacker to cause signature validation to report forged content as unmodified and its signing certificate as valid via a crafted signed PDF document. |
| Unspecified vulnerability in Oracle Java SE 6u95, 7u80, and 8u45; JRockit R28.3.6; and Java SE Embedded 7u75 and 8u33 allows remote attackers to affect confidentiality via vectors related to JSSE. |
| The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). |
| The urllib3 library 1.26.x before 1.26.4 for Python omits SSL certificate validation in some cases involving HTTPS to HTTPS proxies. The initial connection to the HTTPS proxy (if an SSLContext isn't given via proxy_config) doesn't verify the hostname of the certificate. This means certificates for different servers that still validate properly with the default urllib3 SSLContext will be silently accepted. |
| libcurl-using applications can ask for a specific client certificate to be used in a transfer. This is done with the `CURLOPT_SSLCERT` option (`--cert` with the command line tool).When libcurl is built to use the macOS native TLS library Secure Transport, an application can ask for the client certificate by name or with a file name - using the same option. If the name exists as a file, it will be used instead of by name.If the appliction runs with a current working directory that is writable by other users (like `/tmp`), a malicious user can create a file name with the same name as the app wants to use by name, and thereby trick the application to use the file based cert instead of the one referred to by name making libcurl send the wrong client certificate in the TLS connection handshake. |
| libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse, if one of them matches the setup.Due to errors in the logic, the config matching function did not take 'issuercert' into account and it compared the involved paths *case insensitively*,which could lead to libcurl reusing wrong connections.File paths are, or can be, case sensitive on many systems but not all, and caneven vary depending on used file systems.The comparison also didn't include the 'issuer cert' which a transfer can setto qualify how to verify the server certificate. |
| curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. |
| curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. |
| A specific version of the Node.js mongodb-client-encryption module does not perform correct validation of the KMS server’s certificate. This vulnerability in combination with a privileged network position active MITM attack could result in interception of traffic between the Node.js driver and the KMS service rendering client-side field level encryption (CSFLE) ineffective. This issue was discovered during internal testing and affects mongodb-client-encryption module version 1.2.0, which was available from 2021-Jan-29 and deprecated in the NPM Registry on 2021-Feb-04. This vulnerability does not impact driver traffic payloads with CSFLE-supported key services from applications residing inside the AWS, GCP, and Azure nework fabrics due to compensating controls in these environments. This issue does not impact driver workloads that don’t use Field Level Encryption. This issue affect MongoDB Node.js Driver mongodb-client-encryption module version 1.2.0 |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. |
| An improper certificate validation vulnerability was reported in the Lenovo Filez application that could allow a user capable of intercepting network traffic to execute arbitrary code. |
| An improper certificate validation vulnerability was reported in the Lenovo Filez application that could allow a user capable of intercepting network traffic to obtain sensitive user data from the application. |
| A security feature bypass vulnerability exists in Microsoft Windows when the Task Scheduler service fails to properly verify client connections over RPC. An attacker who successfully exploited this vulnerability could run arbitrary code as an administrator. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.
To exploit this vulnerability, a man-in-the-middle attacker would need to send a specially crafted request to a vulnerable system.
The security update addresses the vulnerability by correcting how the Task Scheduler service validates connections. |
| A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. |
| UniFi Network Controller before version 5.10.22 and 5.11.x before 5.11.18 contains an improper certificate verification vulnerability that allows adjacent network attackers to conduct man-in-the-middle attacks by presenting a false SSL certificate during SMTP connections. Attackers can intercept SMTP traffic and obtain credentials by exploiting the insecure SSL host verification mechanism in the SMTP certificate validation process. |
