| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing Authorization vulnerability in Drupal Commerce Core allows Forceful Browsing. This issue affects Commerce Core versions: from 0.0.0 to 2.41, from 3.0.0 to 3.3.13. |
| langgraph-api implements the LangGraph API for rapid development and testing. From 0.1.2 until 0.15.0, JavaScript or TypeScript custom authentication Store authorization handlers can return a rewritten namespace that is not carried across the runtime boundary and applied before the Store operation. An authenticated user can therefore access another user's Store namespace when a deployment relies on namespace rewriting for isolation, allowing unauthorized reads, overwrites, searches, or deletions. Python custom authentication and handlers that reject unauthorized namespaces instead of rewriting them are not affected. This issue is fixed in version 0.15.0. |
| HashiCorp Nomad and Nomad Enterprise are vulnerable to cross-namespace authorization bypasses in several read-only API endpoints that may allow an authenticated user with read permissions in one namespace to view information about objects in other namespaces. This vulnerability (CVE-2026-102260) is fixed in Nomad Community Edition 2.1.1 and Nomad Enterprise 2.1.0, 1.11.12, and 1.10.18. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 12.0 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that, when the instance-wide SAML or LDAP membership lock was enabled, an authenticated user could have granted or accepted project and group membership outside the identity provider's control, due to incomplete enforcement of the membership lock on requests created before the lock was enabled. |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the GRANT PROXY statement treats an IDENTIFIED clause with an empty password as though authentication were not specified, causing it to check the wrong grantor privileges. A low-privileged attacker who can name another account can exploit this authorization error to set that account's password. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| Omnispace Agora Project before 26.10.0 contains a broken access control vulnerability that allows a space administrator to assign users into spaces outside their authority because the spaceAffectList affectation was performed without verifying the caller's rights to the target space. Attackers can exploit the missing readRight() check in the import flow's join INSERT to break tenant isolation and manipulate user-space assignments across unauthorized spaces. |
| Omnispace Agora Project before 26.10.0 contains a broken access control vulnerability that allows a regular, non-administrative member to create user accounts by invoking the user-edit action without a function-level authorization check. Attackers can exploit the missing editRight() enforcement in actionVueEditUser to create unauthorized user accounts, leading to privilege escalation. |
| Tandoor Recipes before 2.7.0 contains an improper cache-key design in cookbook/helper/permission_helper.py that allows authenticated users to retain stale group-based permissions across different spaces by exploiting a cache key keyed only on user id while omitting the active space, with the cached entry's TTL refreshed on every request. Attackers can create their own space to obtain an admin group designation, then switch their active space to a victim space where they hold lesser privileges, causing the stale cached admin decision to authorize elevated access and bypass group revocations or demotions across multiple permission classes and views. |
| The Sensei LMS WordPress plugin before 4.26.4 contains a broken access control vulnerability in the legacy save_new_message handler hooked on the init action, which validates only a generic nonce without verifying course enrollment or restricting post_id to valid post types. Authenticated attackers, including unprivileged Subscribers, can supply an arbitrary post_id for any course, lesson, or quiz to create a private message addressed to that post's author, bypassing the enrollment checks enforced by the newer REST send-message controller. |
| The Sensei LMS WordPress plugin before 4.26.4 contains a broken access control vulnerability in the add_new_module_term AJAX handler that allows authenticated Teacher-role attackers to assign module taxonomy terms to arbitrary courses by supplying a crafted course_id, since the handler validates only a generic nonce and checks manage_options solely for slug prefixing rather than verifying course edit permissions. Attackers can reuse a nonce obtained from their own course metabox to call wp_set_object_terms against courses owned by other teachers or administrators, enabling unauthorized modification of course content they do not own. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.11 before 19.2.8, 19.3 before 19.3.6, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an unauthenticated user to read work item contents from private groups and projects due to incorrect authorization checks. |
| Missing Authorization vulnerability in Surfer Surfer surferseo allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Surfer: from n/a through 1.8.0.744. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipip: require CAP_NET_ADMIN in the device netns for changelink
ipip_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink
ip6gre_changelink() and ip6erspan_changelink() operate on at most two
netns, dev_net(dev) and the tunnel link netns t->net. They differ once
the device is created in or moved to a netns other than the one the
request runs in. The rtnl changelink path checks CAP_NET_ADMIN only
against dev_net(dev), so a caller privileged there but not in t->net can
rewrite a tunnel that lives in t->net.
Gate both ops on rtnl_dev_link_net_capable() at their top, before any
attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink
ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
