Export limit exceeded: 235608 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14658 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43032 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN. | ||||
| CVE-2026-27644 | 1 Traccar | 1 Traccar | 2026-05-08 | 6.5 Medium |
| Traccar is an open source GPS tracking system. In versions between 6.11.1 and 6.13.0, the CSV export functionality writes position data, including user-controlled device and computed attributes, to CSV output without proper escaping. An attacker can inject spreadsheet formulas through exported fields. When a manager or administrator opens the exported CSV file in spreadsheet software, this can cause formula execution and lead to command execution or data exfiltration. This has been patched in version 6.13.0. | ||||
| CVE-2026-43274 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq() The cluster_cfg array is dynamically allocated to hold per-CPU configuration structures, with its size based on the number of online CPUs. Previously, this array was indexed using hartid, which may be non-contiguous or exceed the bounds of the array, leading to out-of-bounds access. Switch to using cpuid as the index, as it is guaranteed to be within the valid range provided by for_each_online_cpu(). | ||||
| CVE-2026-31764 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer. | ||||
| CVE-2026-43046 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130 open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640 btrfs_fill_super fs/btrfs/super.c:987 [inline] btrfs_get_tree_super fs/btrfs/super.c:1951 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline] btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... RIP: 0033:0x7f969c9a8fde Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f ---[ end trace 0000000000000000 ]--- The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic metadata fuzzing tool that corrupts btrfs metadata at runtime. [CAUSE] A non-zero drop_progress.objectid means an interrupted btrfs_drop_snapshot() left a resume point on disk, and in that case drop_level must be greater than 0 because the checkpoint is only saved at internal node levels. Although this invariant is enforced when the kernel writes the root item, it is not validated when the root item is read back from disk. That allows on-disk corruption to provide an invalid state with drop_progress.objectid != 0 and drop_level == 0. When relocation recovery later processes such a root item, merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The same invalid metadata can also trigger the corresponding BUG_ON() in btrfs_drop_snapshot(). [FIX] Fix this by validating the root_item invariant in tree-checker when reading root items from disk: if drop_progress.objectid is non-zero, drop_level must also be non-zero. Reject such malformed metadata with -EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot() and triggers the BUG_ON. After the fix, the same corruption is correctly rejected by tree-checker and the BUG_ON is no longer triggered. | ||||
| CVE-2026-31748 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. | ||||
| CVE-2026-30814 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 8.0 High |
| A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-32203 | 3 Apple, Linux, Microsoft | 7 Macos, Linux Kernel, .net and 4 more | 2026-05-06 | 7.5 High |
| Stack-based buffer overflow in .NET and Visual Studio allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-5435 | 3 Gnu, Redhat, The Gnu C Library | 3 Glibc, Hummingbird, Glibc | 2026-05-05 | 7.3 High |
| The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to enforce the caller-supplied buffer length, and can result in an out-of-bounds write when printing TSIG records. | ||||
| CVE-2024-46859 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. | ||||
| CVE-2018-25306 | 2 Canonical, Poppler-utils | 2 Pdfunite, Pdfunite | 2026-05-05 | 6.2 Medium |
| PDFunite 0.41.0 contains a buffer overflow vulnerability that allows local attackers to crash the application by processing malformed PDF files during merge operations. Attackers can trigger a segmentation fault in the XRef::getEntry function within libpoppler by providing a specially crafted PDF file to the pdfunite utility. | ||||
| CVE-2018-25301 | 1 Ether Software | 1 Easy Mpeg To Dvd Burner | 2026-05-04 | 8.4 High |
| Easy MPEG to DVD Burner 1.7.11 contains a structured exception handling (SEH) local buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying a malicious username string. Attackers can craft a payload containing junk data, SEH chain pointers, and shellcode that overwrites the SEH handler to redirect execution and run arbitrary commands like opening calc.exe. | ||||
| CVE-2026-42483 | 1 Hashcat | 1 Hashcat | 2026-05-02 | 7.3 High |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. | ||||
| CVE-2026-5403 | 1 Wireshark | 1 Wireshark | 2026-05-02 | 7.8 High |
| SBC codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service and possible code execution | ||||
| CVE-2026-42482 | 1 Hashcat | 1 Hashcat | 2026-05-02 | 7.5 High |
| A stack-based buffer overflow in mangle_to_hex_lower() and mangle_to_hex_upper() in src/rp_cpu.c in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted rule file, or via the -j or -k rule options used with password candidates of 128 or more characters. The vulnerability is caused by a bounds check that fails to account for the 2x expansion that occurs when password bytes are converted to hexadecimal. | ||||
| CVE-2026-42476 | 1 Opencascade | 1 Open Cascade Technology | 2026-05-02 | 5.5 Medium |
| Two heap-based out-of-bounds read vulnerabilities in the STL ASCII file parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 exist in RWStl_Reader::ReadAscii because buffers returned by Standard_ReadLineBuffer::ReadLine() are not properly length-validated before strncasecmp or direct byte access. User-assisted attackers can trigger these issues by persuading a victim to open a crafted STL file with extremely short lines, resulting in a denial of service or possible information disclosure. | ||||
| CVE-2026-42479 | 1 Opencascade | 1 Open Cascade Technology | 2026-05-02 | 5.5 Medium |
| An out-of-bounds read vulnerability in VrmlData_IndexedLineSet::TShape in the VRML parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 allows attackers to cause a denial of service via a crafted VRML file. The issue occurs because coordIndex values from parsed input are used as direct array indices without validation against the size of the coordinate array during geometry processing. | ||||
| CVE-2026-5404 | 1 Wireshark | 1 Wireshark | 2026-05-02 | 4.7 Medium |
| K12 RF5 file parser crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service | ||||
| CVE-2026-28532 | 1 Frrouting | 1 Frrouting | 2026-05-01 | 6.5 Medium |
| FRRouting before 10.5.3 contains an integer overflow vulnerability in seven OSPF Traffic Engineering and Segment Routing TLV parser functions where a uint16_t accumulator variable truncates uint32_t values returned by the TLV_SIZE() macro, causing the loop termination condition to fail while pointer advancement continues unchecked. Attackers with an established OSPF adjacency can send a crafted LS Update packet with a malicious Type 10 or Type 11 Opaque LSA to trigger out-of-bounds memory reads and crash all affected routers in the OSPF area or autonomous system. | ||||
| CVE-2026-6529 | 1 Wireshark | 1 Wireshark | 2026-05-01 | 5.5 Medium |
| iLBC audio codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service | ||||