| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mattermost versions 10.11.x <= 10.11.6 and Mattermost GitHub plugin versions <=2.4.0 fail to validate plugin bot identity in reaction forwarding which allows attackers to hijack the GitHub reaction feature to make users add reactions to arbitrary GitHub objects via crafted notification posts. |
| Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue. |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In version 8.0.0, rules using keyword ldap.responses.attribute_type (which is long) with transforms can lead to a stack buffer overflow during Suricata startup or during a rule reload. This issue is fixed in version 8.0.1. To workaround this issue, users can disable rules with ldap.responses.attribute_type and transforms. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: add HE 6 GHz capability in the scan elems len
The HE 6 GHz Band Capability element is in the probe request for
every band if 6 GHz is supported, so add the size to scan_ies_len.
Otherwise, building probe request elements can fail, triggering the
WARN_ON in __ieee80211_start_scan(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()
sk_protocol lives in struct sock, not in struct sock_common. A timewait
or request sock handed to bpf_sock_destroy() by the tcp iterator is
neither, so reading sk->sk_protocol runs past the object:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0
Read of size 2 at addr ffff8881047d11b4 by task test_progs/428
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xf0
print_report+0xd1/0x630
kasan_report+0xf3/0x130
__asan_report_load2_noabort+0x14/0x30
bpf_sock_destroy+0xc7/0xe0
bpf_prog_c3dd61f9d9cd9f37_iter_tcp6_timewait+0x9f/0xb7
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Only check sk_protocol on full socks. tcp_abort() already knows how to
deal with TIME_WAIT and NEW_SYN_RECV socks. Also fix the comment, it
never matched the code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit
btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the
FRBD array access, allowing frbd_index == rxq->count to pass through
and index one element past the end of the array. Change the check to
>= rxq->count so every out-of-range index is rejected.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix tpm2_load_cmd() boundary check
tpm2_load_cmd() does boundary checks against the ASN.1 size i.e.,
payload->blob_len. Address this by passing the decoded blob size to
tpm2_load_cmd(), and use it for the boundary checks. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| Microsoft Office 2007 SP2 and SP3 and 2010 SP1 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted Computer Graphics Metafile (CGM) file, aka "CGM File Format Memory Corruption Vulnerability." |
| Microsoft Office 2007 SP3 allows remote attackers to execute arbitrary code via a crafted document, aka "Microsoft Office Memory Corruption Vulnerability." |
| In NTFS-3G before 2026.7.7, a heap buffer overflow exists in ntfs_ib_copy_tail(), in libntfs-3g/index.c, that allows an attacker to corrupt heap memory in the SUID-root ntfs-3g binary by crafting a malicious NTFS image. The overflow is triggered by extending a directory, e.g., by creating a file. |
| Hazelcast is a unified real-time data platform combining stream processing with a fast data store. Prior to 5.4.5, 5.5.10, and 5.6.1, improper validation of data supplied by a malicious client able to connect to a cluster allows arbitrary reads from a cluster member's Java heap, off-heap data, and JVM process address space. The same flaw can crash cluster members and, in some Hazelcast Enterprise Edition configurations, corrupt memory with possible arbitrary code execution. Both slim and full distributions are affected. This issue is fixed in versions 5.4.5, 5.5.10, 5.6.1, and 5.7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes. |
| An issue in Mercusys AC12 V2 allows a local attacker to execute arbitrary code via the UART serial interface on the printed circuit board (PCB) |
| Quasar Framework is a framework for building high-performance Vue.js user interfaces. Prior to 3.3.0, several @quasar/app-vite SSR and SSG rendering paths interpolated ssrContext.nonce directly into quoted HTML attributes. An application that derives or overrides this value with attacker-controlled data can allow a quote to terminate the nonce attribute and inject additional attributes or markup into generated HTML across development and production SSR or SSG output. Cryptographically generated base64 or base64url nonces are not affected because they lack HTML attribute delimiters. This issue is fixed in version 3.3.0. |
| A heap-based buffer over-read in H5Z__filter_scaleoffset() in src/H5Zscaleoffset.c in HDF5 through 2.2.0 lets an attacker cause a denial of service (application crash) with a crafted HDF5 file. When the stored minimum bits equal the full precision of the datatype, the decoder copies d_nelmts * size bytes from the compressed chunk without checking that the chunk holds that many bytes. Both values come from attacker-controlled scale-offset filter parameters in the dataset's filter pipeline message. |
