| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Improper Authorization vulnerability in Apache ZooKeeper.
When SASL authentication is enabled on the client port, the server's SASL callback handler grants every authorization identity (authzid) that a client requests, without checking it against the principal the client authenticated as. The server then tries to replace the requested identity with a canonical form of the authenticated principal, derived from the zookeeper.security.auth_to_local rules. If no rule applies to the principal, canonicalization fails and the error is only logged. The client-requested authzid then becomes the session's SASL identity for all ACL checks.
An authenticated client whose principal is not covered by the auth_to_local rules can therefore claim any SASL identity. With the default rules, this includes any Kerberos principal from a realm other than the server's default realm, such as a principal from a cross-realm trusted realm. The client then gets the permissions granted to that identity in sasl ACLs. If the requested identity matches a configured zookeeper.superUser, it gets superuser access to the whole data tree.
Users are recommended to upgrade to version 3.8.8 or 3.9.7, which fixes the issue. |
| The platform allows persistent HTML injection into editable fields managed by TinyMCE. An authenticated attacker with low privileges can inject unsanitised HTML content which is stored in the database and subsequently rendered in other users’ browsers, affecting the display of content within the application. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Context.Scheme unconditionally trusts forwarded scheme headers from any client. A client that reaches Echo directly over plaintext HTTP can claim an HTTPS scheme and bypass HTTPSRedirect because the request is treated as already secure. Separately, behind a TLS-terminating proxy that passes an attacker-controlled header, a claimed HTTP scheme can suppress the Strict-Transport-Security header even though the browser receives the response over HTTPS. The practical risk is reduced when a trusted proxy overwrites the headers and direct backend access is prevented, but the framework previously had no trusted-source configuration for this decision. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Echo's MethodOverride middleware accepts a safe HTTP method as the override target for a POST request. When MethodOverride is registered before CSRF in the post-routing middleware chain, route selection retains the original state-changing POST handler but the override changes the method before CSRF evaluates it, causing both token validation and Sec-Fetch-Site checks to be skipped. A cross-site exploit requires an authenticated victim and an override value that a browser-submitted request can control, such as the form getter used by the advisory reproducer; the default X-HTTP-Method-Override header getter is not settable by a cross-site form. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. From 4.0.0 until 5.1.0, Context.RealIP falls back to client-supplied X-Forwarded-For or X-Real-IP values when Echo.IPExtractor is unset, and the default RateLimiter uses that result as its client identifier. A remote attacker can rotate arbitrary forwarded-address values to obtain new rate-limit buckets and bypass IP-based throttling used for controls such as brute-force or request-volume protection. This issue is fixed in Echo v5.1.0. |
| croc is a tool that allows any two computers to simply and securely transfer files and folders. Prior to 11.5.2, the receive-side file-readiness loop in src/croc/croc.go treats any sender-controlled basename beginning with croc-stdin- as a trusted text-transfer artifact even when SendingText is false. This skips askReceiveOverwrite and rename handling for a predictable exact-name collision in the receiver's working directory, allowing a remote sender whose transfer the user accepts to overwrite or truncate a matching regular file through recipientInitializeFile, or to remove and replace a matching destination with an empty file or an in-directory symlink through createEmptyFileAndFinish, without confirmation. The impact is limited to pre-existing names in the croc-stdin- namespace that the sender can predict; other filenames retain the prompt, dotfiles outside that namespace are not reachable, and symlink targets remain confined to the receive directory. This issue is fixed in version 11.5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: validate count before reading Status Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix oops when split header is enabled
For GMAC4, when split header is enabled, in some rare cases, the
hardware does not fill buf2 of the first descriptor with payload.
Thus we cannot assume buf2 is always fully filled if it is not
the last descriptor. Otherwise, the length of buf2 of the second
descriptor will be calculated wrong and cause an oops:
Unable to handle kernel paging request at virtual address ffff00019246bfc0
...
x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000
Call trace:
dcache_inval_poc+0x28/0x58 (P)
dma_direct_sync_single_for_cpu+0x38/0x6c
__dma_sync_single_for_cpu+0x34/0x6c
stmmac_napi_poll_rx+0x8f0/0xb60
__napi_poll.constprop.0+0x30/0x144
net_rx_action+0x160/0x274
handle_softirqs+0x1b8/0x1fc
...
To fix this, the PL bit-field in RDES3 register is used for all
descriptors, whether it is the last descriptor or not. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: verify the previous kernel's IMA buffer lies in addressable RAM
Patch series "Address page fault in ima_restore_measurement_list()", v3.
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>" we observe a pafe fault that happens.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) not-present page
This happens on x86_64 only, as this is already fixed in aarch64 in
commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds")
This patch (of 3):
When the second-stage kernel is booted with a limiting command line (e.g.
"mem=<size>"), the IMA measurement buffer handed over from the previous
kernel may fall outside the addressable RAM of the new kernel. Accessing
such a buffer can fault during early restore.
Introduce a small generic helper, ima_validate_range(), which verifies
that a physical [start, end] range for the previous-kernel IMA buffer lies
within addressable memory:
- On x86, use pfn_range_is_mapped().
- On OF based architectures, use page_is_ram(). |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB read from firmware IE lengths in connect event
The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len
fields in ath6kl_wmi_connect_event_rx() are not validated against the
buffer length. Their sum (up to 765) can exceed the actual WMI event
data, causing out-of-bounds reads during IE parsing and state corruption
of wmi->is_wmm_enabled.
Add a check that the total IE length fits within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate DFS referral PathConsumed
parse_dfs_referrals() validates that the response contains the fixed
referral entry array and, on for-next, the per-referral string offsets.
However, the response also contains a PathConsumed value that is later
used for DFS path parsing.
If a malformed response provides a PathConsumed value larger than the
search name, later DFS parsing can advance beyond the end of the path.
Validate PathConsumed against the search name length before storing it in
the parsed referral. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
Explicitly check the buffer length request structure provided by
user-space and fail, if it exceeds the buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate individual TWT params before driver setup
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
[edit commit message to not overclaim lack of validation nor
understate driver impact] |
