| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: add and use xtables_unregister_table_exit
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: free unfragmentable packet
The caller of batadv_frag_send_packet() assume that the skb provided to the
function are always consumed. But the pre-check for an empty payload or the
zero fragment size returned an error without any further actions.
A failed pre-check must use the same error handling code as the rest of the
function. |
| IndexedDB should be cleared when leaving private browsing mode and it is not, the API for WKWebViewConfiguration was being used incorrectly and requires the private instance of this object be deleted when leaving private mode. This vulnerability affects Firefox for iOS < 27. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: clean up XDP TX queues when regular TX setup fails
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: clear stale link mapping of ahvif->links_map
When an arvif is initialized in non-AP STA mode but MLO connection
preparation fails before the arvif is created
(arvif->is_created remains false), the error path attempts to delete all
links. However, link deletion only executes when arvif->is_created is true.
As a result, ahvif retains a stale entry of arvif that is initialized but
not created.
When a new arvif is initialized with the same link id, this stale mapping
triggers the following WARN_ON.
WARNING: drivers/net/wireless/ath/ath12k/mac.c:4271 at ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k], CPU#3: wpa_supplicant/275
Call trace:
ath12k_mac_op_change_vif_links+0x140/0x180 [ath12k] (P)
drv_change_vif_links+0xbc/0x1a4 [mac80211]
ieee80211_vif_update_links+0x54c/0x6a0 [mac80211]
ieee80211_vif_set_links+0x40/0x70 [mac80211]
ieee80211_prep_connection+0x84/0x450 [mac80211]
ieee80211_mgd_auth+0x200/0x480 [mac80211]
ieee80211_auth+0x14/0x20 [mac80211]
cfg80211_mlme_auth+0x90/0xf0 [cfg80211]
nl80211_authenticate+0x32c/0x380 [cfg80211]
genl_family_rcv_msg_doit+0xc8/0x134
Fix this issue by unassigning the link vif and clearing ahvif->links_map
if arvif is only initialized but not created.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss()
Sashiko points out there are two bugs here in the error unwind flow, both
related to how the WQ table is unwound.
First there is a double i-- on the first failure path due to the while loop
having a i--, remove it.
Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not
undone due to the above i--. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| BestCrypt BCWipe 1.0.7 and 2.0 through 2.35.1 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. |
| East-Tec Eraser 2002 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. |
| Eraser 5.3 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. |
| PGP 6.x and 7.x does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. |
| ICQwebmail client for ICQ 2000A creates a world readable temporary file during login and does not delete it, which allows local users to obtain sensitive information. |
| SecureClean 3 build 2.0 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. |
| Oracle Formsbuilder 9.0.4 stores database usernames and passwords in a temporary file, which is not deleted after it is used, which allows local users to obtain sensitive information. |
| An interaction between PGP 7.0.3 with the "wipe deleted files" option, when used on Windows Encrypted File System (EFS), creates a cleartext temporary files that cannot be wiped or deleted due to strong permissions, which could allow certain local users or attackers with physical access to obtain cleartext information. |
| BEA WebLogic Server and WebLogic Express 7.0 through Service Pack 5 does not log out users when an application is redeployed, which allows those users to continue to access the application without having to log in again, which may be in violation of newly changed security constraints or role mappings. |
