| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Software installed and run as a non-privileged user may conduct improper GPU system calls causing a stack overflow in the kernel. The overflow occurs when processing resolved Linux/Android fence synchronization checkpoints, while user checkpoints are excluded from the stack array. Successful exploitation can cause kernel memory corruption and typically results in a denial-of-service condition through a kernel crash.
The code vulnerability is a buffer write beyond the allocated array on the stack caused by copying excessive data from an internal buffer. |
| FreeSWITCH is an open-source software telecommunications platform. From 1.10.0 to 1.11.1, there is a stack-based buffer overflow in mod_sofia when processing SIP Contact display names for dialog-event notifications. A peer can establish a dialog containing an excessively long display name and subsequently subscribe to that entity’s dialog events, causing the stored value to overflow a fixed 512-byte stack buffer. Exploitation requires presence management to be enabled, directly or through shared appearance, and normally requires valid profile credentials unless subscription authentication is disabled. The overflow can terminate the FreeSWITCH process and all active calls. This vulnerability is fixed in version 1.11.2. |
| ntopng is a web-based network traffic monitoring application. Prior to 6.7.260721, ndpi_get_custom_category_match writes a four-byte nDPI protocol-category value through a pointer to the two-byte id variable in IpAddress::reloadBlacklist in src/IpAddress.cpp during packet dissection and host initialization. A remote unauthenticated attacker on a monitored network segment can send packets that match custom-category rules, causing stack corruption and denial of service without user interaction. This issue is fixed in version 6.7.260721. |
| FreeSWITCH is an open-source software telecommunications platform. From 1.10.0 until 1.11.1, a stack-based buffer overflow in mod_sofia when generating dialog-event notifications. A peer can establish a dialog with an excessively long SIP To-header user part and subsequently subscribe to that entity’s dialog events, causing the stored value to overflow a fixed-size stack buffer. Exploitation requires presence or shared-appearance management to be enabled and normally requires valid profile credentials, unless subscription authentication is disabled. The overflow can terminate the FreeSWITCH process and all active calls. This vulnerability is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, switch_core_media_add_crypto() passed the encoded key and salt length from an inbound SDP a=crypto attribute to switch_b64_decode() as the destination capacity. A zero-length key and salt made that capacity underflow, allowing the decoded attribute to overflow a fixed stack buffer with sender-chosen bytes before the call was answered. On the shipped external profile, an unauthenticated caller can reach the SDES-SRTP parser, while profiles that challenge inbound calls remain affected for senders who can authenticate; setting rtp_secure_media_inbound to false removes the path, and WebRTC DTLS-SRTP legs are unaffected. The overflow corrupts memory and can crash the FreeSWITCH process, dropping every active call, although remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, http_directory_auth() rebuilt an expected user@domain:password credential and base64-encoded it into an 80-byte buffer using an encoder without an output-length argument. A configured credential longer than 57 characters overflowed the stack before the supplied HTTP Basic password was compared. An unauthenticated client only needed to name an existing directory user on an exposed mod_xml_rpc HTTP listener; the module is built but not loaded by the stock configuration. The overflow can corrupt the stack and crash FreeSWITCH, ending every active call, although the overrun bytes come from the configured credential and remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_rtp2rtmpH264() built an AVC decoder configuration record in a fixed stack buffer by copying wire-derived SPS and PPS values without checking that their sizes and framing fit. An established H.264 call bridged toward an RTMP endpoint could supply oversized SPS and PPS parameter sets and overrun the function's stack frame. The flaw affects only deployments that build and load mod_rtmp and bridge RTP media into an RTMP leg; the module is disabled in the stock build and configuration. The corruption can abort FreeSWITCH and terminate every active call, and builds without stack protection receive a limited stack-write primitive, although code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, rtmp_handle_control() rendered an RTMP user-control message into a 200-byte stack buffer using an unbounded sprintf loop controlled by the wire message length. A body of roughly 70 bytes or more overflowed the stack before any RTMP login, because the handshake authenticates neither side. The flaw affects deployments that build and load mod_rtmp, which is disabled in the stock build and configuration but commonly exposes a listener on TCP port 1935 when enabled. One unauthenticated message can crash FreeSWITCH and end every active call; the constrained ASCII hex output has not yielded control-flow hijacking. This issue is fixed in version 1.11.2. |
| A flaw was found in rrdcached, a component of rrdtool. A local attacker with access to a rrdcached socket can exploit a stack-based buffer overflow by sending an oversized CREATE request. This vulnerability can lead to a denial of service by crashing the daemon or potentially allow for arbitrary code execution, impacting the integrity and confidentiality of data. |
| NEURON (CoreNEURON) through 9.0.2 contains a stack buffer overflow vulnerability that allows attackers to corrupt stack memory by supplying over-long tokens in a crafted model dataset. Attackers can place oversized version or mechanism-name tokens in bbcore_mech.dat, globals.dat, or files.dat loaded by nrniv-core to crash the process. |
| A stack buffer overflow in the GDB client's tracepoint upload handler allows an attacker-controlled debug stub to corrupt stack memory automatically during connection setup. The overflow results from GDB reading beyond the current reply boundary into a stale prior reply in the shared packet buffer. |
| Alpine iLX-F511 prh_sdp_service_search_decode Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. An attacker must first obtain the ability to pair a malicious Bluetooth device with the target system in order to exploit this vulnerability.
The specific flaw exists within the prh_sdp_service_search_decode function. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29069. |
| Alpine iLX-F511 Framework Service Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the framework service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29007. |
| Alpine iLX-F511 vCard Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected Alpine iLX-F511 devices. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device.
The specific flaw exists within the parsing of vCard data. The issue results from the lack of proper validation of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29017. |
| A vulnerability was found in VStarcam O-KAM Client 1.3.3.32. Affected by this vulnerability is the function FUN_10003EA0 in the library DevDll_925.dll. The manipulation results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Alpine iLX-F511 Android Auto Service Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the Android Auto service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29015. |
| Alpine iLX-F511 Android Auto Connection Handler Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the Android Auto connection handler. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29016. |
| FLTK through 1.4.5 contains a stack-based buffer overflow vulnerability in Fl_BMP_Image::load_bmp_() that allows attackers to corrupt stack memory by supplying an oversized BMP colors_used field. Attackers can craft BMP or ICO files with colors_used above 256 to overflow the 768-byte colormap array, causing crashes or potential code execution. |
| SDL_mixer 3.1.2 through 3.2.4 contains a stack-based buffer overflow vulnerability in FetchXLaw() of src/decoder_wav.c when decoding A-law or mu-law WAV files. Attackers can supply a crafted WAV file whose doubly-offset float expansion overwrites about 1 KB of adjacent stack memory, causing crashes or potentially code execution. |
| A stack-based buffer overflow was found in rpcbind's rpcinfo utility. In rpcbdump() short mode (used by `rpcinfo -s`), version numbers from a remote RPCBPROC_DUMP reply are written into a fixed-size stack buffer without bounds checking. A user or administrator who runs `rpcinfo -s` against a malicious or compromised rpcbind endpoint could experience a crash or denial of service of the rpcinfo client. |
