| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Bound VBIOS record-chain walk loops
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
(cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp VBIOS HDMI retimer register count to array size
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/capsule-loader: fix incorrect sizeof in phys array reallocation
The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses
sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be
causing an undersized allocation.
The allocation is also inconsistent with the initial array allocation in
efi_capsule_open() that allocates one entry with sizeof(phys_addr_t),
and the efi_capsule_write() function that stores phys_addr_t values (not
pointers) via page_to_phys().
On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this
goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but
pointers are 32-bit, this allocates half the required space, which might
lead to a heap buffer overflow when storing physical addresses.
This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:
fix incorrect allocation size") which fixed the same issue at the initial
allocation site. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix integer overflow in UNMAP bounds check
sbc_execute_unmap() checks LBA + range does not exceed the device capacity,
but does not guard against LBA + range wrapping around on 64-bit overflow.
Add an overflow check matching the pattern already used for WRITE_SAME in
the same file. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but
macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.
This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb
runs out of space, triggering a WARN_ON in rtnetlink and preventing the
interface from being dumped.
The bug can be reproduced with:
ip link add macvlan0 link eth0 type macvlan mode bridge
ip link set macvlan0 type macvlan bc_cutoff 0
ip -d link show macvlan0 # fails with -EMSGSIZE
The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add
netlink attribute for broadcast cutoff"), which added the nla_put_s32()
call in macvlan_fill_info() but missed adding the corresponding
nla_total_size(4) in macvlan_get_size(). A follow-up commit
55cef78c244d ("macvlan: add forgotten nla_policy for
IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still
did not fix the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Cap AEAD AD length to 0x80000000
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans
The USB MIDI 2.0 endpoint parser has the same descriptor walking
pattern as the legacy MIDI parser. It validates bLength against
bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the
remaining bytes in the endpoint-extra scan.
A malformed device can therefore make later baAssoGrpTrmBlkID[] reads
consume bytes past the walked descriptor.
Reject zero-length and overlong descriptors while walking endpoint
extras. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI endpoint descriptor scans
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong
timeout value` warning was observed, accompanied by SMBus controller
state machine corruption.
The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of
10 ms. The user argument is checked against INT_MAX, but it is
subsequently multiplied by 10 before being passed to msecs_to_jiffies().
A malicious user can pass a large value (e.g., 429496729) that passes
the `arg > INT_MAX` check but overflows when multiplied by 10. This
results in a truncated 32-bit unsigned value that bypasses the
internal `(int)m < 0` check in `msecs_to_jiffies()`.
The truncated value is then assigned to `client->adapter->timeout`
(a signed 32-bit int), which is reinterpreted as a negative number.
When passed to wait_for_completion_timeout(), this negative value
undergoes sign extension to a 64-bit unsigned long, triggering the
`schedule_timeout` warning and causing premature returns. This leaves
the SMBus state machine in an unrecoverable state, constituting a
local Denial of Service (DoS).
Fix this by bounding the user argument to `INT_MAX / 10`.
[wsa: move the comment as well] |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix a buffer overflow in ioctl processing
Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the
function retrieve_status:
1. The code in retrieve_status checks that the output string fits into
the output buffer and writes the output string there
2. Then, the code aligns the "outptr" variable to the next 8-byte
boundary:
outptr = align_ptr(outptr);
3. The alignment doesn't check overflow, so outptr could point past the
buffer end
4. The "for" loop is iterated again, it executes:
remaining = len - (outptr - outbuf);
5. If "outptr" points past "outbuf + len", the arithmetics wraps around
and the variable "remaining" contains unusually high number
6. With "remaining" being high, the code writes more data past the end of
the buffer
Luckily, this bug has no security implications because:
1. Only root can issue device mapper ioctls
2. The commonly used libraries that communicate with device mapper
(libdevmapper and devicemapper-rs) use buffer size that is aligned to
8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input
buffer and the bug can't happen accidentally |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: fix buffer size clamping order
In vsock_update_buffer_size(), the buffer size was being clamped to the
maximum first, and then to the minimum. If a user sets a minimum buffer
size larger than the maximum, the minimum check overrides the maximum
check, inverting the constraint.
This breaks the intended socket memory boundaries by allowing the
vsk->buffer_size to grow beyond the configured vsk->buffer_max_size.
Fix this by checking the minimum first, and then the maximum. This
ensures the buffer size never exceeds the buffer_max_size. |
