| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the Keycloak Account REST API where it incorrectly handles session identification. A malicious client owner can manipulate their own security tokens to point to a different user's active session. This allows the attacker to access and modify the victim's account information, potentially leading to a full account takeover by changing the recovery email and resetting the password. |
| A flaw was found in the TokenManager component of Keycloak, an open-source identity and access management solution. The issue occurs during the validation of stateless access tokens when the original user ID no longer exists. Keycloak incorrectly falls back to using the username to identify the user without verifying if the identity matches the original token subject. This could allow an attacker with an old token to gain access to a newly created service account if it shares the same client ID as a previously deleted one. |
| Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO Neo EC and CW Edge Controller allows Authentication Bypass.
This issue affects EasyIO Neo EC and CW Edge Controller: from EC 3.3b62 through EC 3.3b63 and from CW 3.3b24 through CW 3.3b25. |
| PDF Reader MCP is a Model Context Protocol server for reading PDF documents. In versions 2.2.0 and later prior to 3.0.1, when `MCP_TRANSPORT=http` enables the opt-in HTTP server, `@sylphx/pdf-reader-mcp` reads `MCP_API_KEY` and logs that `X-API-Key` authentication is enabled but never validates the `X-API-Key` header on incoming requests. The `/mcp` endpoint consequently accepts unauthenticated clients. With the default bind address of `0.0.0.0`, any client able to reach the port can invoke every PDF tool and read any PDF the server process can open on the host, despite the misleading authentication-enabled startup log. URL-based sources additionally permit limited server-side request forgery; private and loopback destinations are blocked by default unless `--allow-private-ips` is set. The default `stdio` transport is unaffected. This issue is fixed in version 3.0.1. |
| A flaw was found in the Admin REST API of Keycloak, an identity and access management solution. The Admin API fails to verify the intended audience of bearer tokens during authentication. This issue allows an attacker who operates a client within a realm to capture an administrator's access token and reuse it to perform unauthorized administrative actions, potentially leading to full realm compromise. |
| A flaw was found in the group policy provider of Keycloak authorization services, which is used to manage fine-grained access control to resources. The issue occurs when the system evaluates group-based policies using tokens that only contain group names rather than full paths. If two groups in different parts of the organization share the same name, a user in the unauthorized group can be mistaken for a member of the authorized group. This can allow a user to gain unauthorized access to protected resources they should not be able to reach. |
| Vulnerability in the Oracle Utilities Network Management System product of Oracle Utilities Applications (component: System Wide). Supported versions that are affected are 2.4.0.1.0-2.4.0.1.33, 2.5.0.1.0-2.5.0.1.18, 2.5.0.2.0-2.5.0.2.11, 2.6.0.1.0-2.6.0.1.12, 2.6.0.2.0-2.6.0.2.10 and 25.12.0.0.0-25.12.0.0.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Utilities Network Management System. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Utilities Network Management System accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in Oracle GoldenGate (component: Vendor Access Module). Supported versions that are affected are 21.3-21.23. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle GoldenGate executes to compromise Oracle GoldenGate. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle GoldenGate accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in Oracle TimesTen In-Memory Database (component: TimesTen IMDB). Supported versions that are affected are 26.1-26.1.1.3.0. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle TimesTen In-Memory Database executes to compromise Oracle TimesTen In-Memory Database. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle TimesTen In-Memory Database accessible data as well as unauthorized read access to a subset of Oracle TimesTen In-Memory Database accessible data. CVSS 3.1 Base Score 3.6 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:L/A:N). |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.20. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Agile Product Lifecycle Management for Process, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Agile Product Lifecycle Management for Process accessible data as well as unauthorized read access to a subset of Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N). |
| Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle Utilities Network Management System product of Oracle Utilities Applications (component: System Wide). Supported versions that are affected are 2.6.0.1.0-2.6.0.1.12, 2.6.0.2.0-2.6.0.2.10 and 25.12.0.0.0-25.12.0.0.2. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Utilities Network Management System. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Utilities Network Management System accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-webclient). Supported versions that are affected are 4.0.0-4.5.5 and 27.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| A improper access control vulnerability in Fortinet FortiAuthenticator 8.0.2, FortiAuthenticator 8.0.0, FortiAuthenticator 6.6.0 through 6.6.8, FortiAuthenticator 6.5.0 through 6.5.6, FortiAuthenticator 6.4.0 through 6.4.10 may allow attacker to execute unauthorized code or commands via crafted requests. |
| The `/api/v1/admin` route group did not enforce the `public-only` restriction of personal access tokens. A public-only token with admin scope issued by a site administrator could therefore list private organizations and the email addresses of all users, create organizations, obtain runner registration tokens and create new site administrator accounts, the last of which persists after the token is revoked. Tokens of users who are not site administrators cannot reach these routes; public-only tokens are now rejected on the admin API. |
| When `[oauth2_client].ACCOUNT_LINKING` is set to `auto` (not the default) and registration is enabled, the link-account sign-up form looked up the existing account to link by the user name or email submitted in the form instead of the identity asserted by the OAuth2 provider. An attacker with an account on a configured OAuth2 provider could submit another user's name, link their external identity to that Gitea account and be signed in as it without its password, including as an administrator. The link persisted for later sign-ins. Automatic linking now only happens when the existing account matches the provider's email or provider-derived user name; otherwise the account password is required. |
| The repositories, stars and watching tabs of user profiles and the repository list of organization home pages included private repositories for every signed-in request without checking whether the request used a personal access token restricted to public resources (`public-only`). A holder of such a token could list the private repositories visible to the token's owner, and that user's stars and watches of private repositories. The API and the profile activity tab already applied the restriction. The impact is disclosure of repository names and metadata, not of repository content. |
| A flaw was found in NetworkManager. The NetworkManager package allows access to files that may belong to other users. NetworkManager allows non-root users to configure the system's network. The daemon runs with root privileges and can access files owned by users different from the one who added the connection. |
| A flaw was found in the OIDC implementation of Keycloak, specifically within the Device Authorization Grant flow. This component allows devices with limited input capabilities to obtain security tokens. The issue occurs because the flow fails to check the minimum authentication level required by a client configuration. This allows an attacker who has stolen a user's password to bypass mandatory multi-factor authentication and gain unauthorized access to the Keycloak Admin REST API. |
