Export limit exceeded: 235339 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (235339 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43462 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function. | ||||
| CVE-2026-43426 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called. | ||||
| CVE-2026-43471 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace() The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL pointer dereference when accessing hwq->id. This can happen if ufshcd_mcq_req_to_hwq() returns NULL. This patch adds a NULL check for hwq before accessing its id field to prevent a kernel crash. Kernel log excerpt: [<ffffffd5d192dc4c>] notify_die+0x4c/0x8c [<ffffffd5d1814e58>] __die+0x60/0xb0 [<ffffffd5d1814d64>] die+0x4c/0xe0 [<ffffffd5d181575c>] die_kernel_fault+0x74/0x88 [<ffffffd5d1864db4>] __do_kernel_fault+0x314/0x318 [<ffffffd5d2a3cdf8>] do_page_fault+0xa4/0x5f8 [<ffffffd5d2a3cd34>] do_translation_fault+0x34/0x54 [<ffffffd5d1864524>] do_mem_abort+0x50/0xa8 [<ffffffd5d2a297dc>] el1_abort+0x3c/0x64 [<ffffffd5d2a29718>] el1h_64_sync_handler+0x44/0xcc [<ffffffd5d181133c>] el1h_64_sync+0x80/0x88 [<ffffffd5d255c1dc>] ufshcd_add_command_trace+0x23c/0x320 [<ffffffd5d255bad8>] ufshcd_compl_one_cqe+0xa4/0x404 [<ffffffd5d2572968>] ufshcd_mcq_poll_cqe_lock+0xac/0x104 [<ffffffd5d11c7460>] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod] [<ffffffd5d19ab92c>] __handle_irq_event_percpu+0xc8/0x348 [<ffffffd5d19abca8>] handle_irq_event+0x3c/0xa8 [<ffffffd5d19b1f0c>] handle_fasteoi_irq+0xf8/0x294 [<ffffffd5d19aa778>] generic_handle_domain_irq+0x54/0x80 [<ffffffd5d18102bc>] gic_handle_irq+0x1d4/0x330 [<ffffffd5d1838210>] call_on_irq_stack+0x44/0x68 [<ffffffd5d183af30>] do_interrupt_handler+0x78/0xd8 [<ffffffd5d2a29c00>] el1_interrupt+0x48/0xa8 [<ffffffd5d2a29ba8>] el1h_64_irq_handler+0x14/0x24 [<ffffffd5d18113c4>] el1h_64_irq+0x80/0x88 [<ffffffd5d2527fb4>] arch_local_irq_enable+0x4/0x1c [<ffffffd5d25282e4>] cpuidle_enter+0x34/0x54 [<ffffffd5d195a678>] do_idle+0x1dc/0x2f8 [<ffffffd5d195a7c4>] cpu_startup_entry+0x30/0x3c [<ffffffd5d18155c4>] secondary_start_kernel+0x134/0x1ac [<ffffffd5d18640bc>] __secondary_switched+0xc4/0xcc | ||||
| CVE-2026-43430 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data. | ||||
| CVE-2026-43431 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub. | ||||
| CVE-2010-0249 | 1 Microsoft | 7 Internet Explorer, Windows 2000, Windows 7 and 4 more | 2026-05-20 | 8.8 High |
| Use-after-free vulnerability in Microsoft Internet Explorer 6, 6 SP1, 7, and 8 on Windows 2000 SP4; Windows XP SP2 and SP3; Windows Server 2003 SP2; Windows Vista Gold, SP1, and SP2; Windows Server 2008 Gold, SP2, and R2; and Windows 7 allows remote attackers to execute arbitrary code by accessing a pointer associated with a deleted object, related to incorrectly initialized memory and improper handling of objects in memory, as exploited in the wild in December 2009 and January 2010 during Operation Aurora, aka "HTML Object Memory Corruption Vulnerability." | ||||
| CVE-2008-4250 | 1 Microsoft | 5 Windows 2000, Windows Server 2003, Windows Server 2008 and 2 more | 2026-05-20 | 9.8 Critical |
| The Server service in Microsoft Windows 2000 SP4, XP SP2 and SP3, Server 2003 SP1 and SP2, Vista Gold and SP1, Server 2008, and 7 Pre-Beta allows remote attackers to execute arbitrary code via a crafted RPC request that triggers the overflow during path canonicalization, as exploited in the wild by Gimmiv.A in October 2008, aka "Server Service Vulnerability." | ||||
| CVE-2026-43454 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook. | ||||
| CVE-2026-43455 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call. | ||||
| CVE-2025-56009 | 1 Keenetic | 1 Keeneticos | 2026-05-20 | 5.3 Medium |
| Cross site request forgery (CSRF) vulnerability in KeeneticOS before 4.3 at "/rci" API endpoint allows attackers to take over the device via adding additional users with full permissions by managing the victim to open page with exploit. | ||||
| CVE-2025-56008 | 1 Keenetic | 1 Keeneticos | 2026-05-20 | 6.1 Medium |
| Cross site scripting (XSS) vulnerability in KeeneticOS before 4.3 at "Wireless ISP" page allows attackers located near to the router to takeover the device via adding additional users with full permissions. | ||||
| CVE-2025-56007 | 1 Keenetic | 1 Keeneticos | 2026-05-20 | 6.5 Medium |
| CRLF-injection in KeeneticOS before 4.3 at "/auth" API endpoint allows attackers to take over the device via adding additional users with full permissions by managing the victim to open page with exploit. | ||||
| CVE-2026-43380 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call. | ||||
| CVE-2026-43378 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window. | ||||
| CVE-2026-31412 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() The `check_command_size_in_blocks()` function calculates the data size in bytes by left shifting `common->data_size_from_cmnd` by the block size (`common->curlun->blkbits`). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in `fsg_lun_open()` , and the `common->data_size_from_cmnd` is set up in `do_scsi_command()`. During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (`common->data_size_from_cmnd`), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows. | ||||
| CVE-2026-31413 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the source operand is a constant. When dst has signed range [-1, 0], it forks the verifier state: the pushed path gets dst = 0, the current path gets dst = -1. For BPF_AND this is correct: 0 & K == 0. For BPF_OR this is wrong: 0 | K == K, not 0. The pushed path therefore tracks dst as 0 when the runtime value is K, producing an exploitable verifier/runtime divergence that allows out-of-bounds map access. Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to push_stack(), so the pushed path re-executes the ALU instruction with dst = 0 and naturally computes the correct result for any opcode. | ||||
| CVE-2026-42468 | 1 Openvehicles | 3 Open Vehicle Monitoring System, Open Vehicle Monitoring System 3, Open Vehicle Monitoring System Firmware | 2026-05-20 | 8.8 High |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_pcap.cpp , the parser's phdr.len field is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted PCAP input. | ||||
| CVE-2026-42469 | 1 Openvehicles | 3 Open Vehicle Monitoring System, Open Vehicle Monitoring System 3, Open Vehicle Monitoring System Firmware | 2026-05-20 | 8.6 High |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_canswitch.cpp the parser does not properly validate a CANswitch DLC value, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted CANswitch frames. | ||||
| CVE-2026-31434 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix leak of kobject name for sub-group space_info When create_space_info_sub_group() allocates elements of space_info->sub_group[], kobject_init_and_add() is called for each element via btrfs_sysfs_add_space_info_type(). However, when check_removing_space_info() frees these elements, it does not call btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is not called and the associated kobj->name objects are leaked. This memory leak is reproduced by running the blktests test case zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak feature reports the following error: unreferenced object 0xffff888112877d40 (size 16): comm "mount", pid 1244, jiffies 4294996972 hex dump (first 16 bytes): 64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc...... backtrace (crc 53ffde4d): __kmalloc_node_track_caller_noprof+0x619/0x870 kstrdup+0x42/0xc0 kobject_set_name_vargs+0x44/0x110 kobject_init_and_add+0xcf/0x150 btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs] create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs] create_space_info+0x211/0x320 [btrfs] btrfs_init_space_info+0x15a/0x1b0 [btrfs] open_ctree+0x33c7/0x4a50 [btrfs] btrfs_get_tree.cold+0x9f/0x1ee [btrfs] vfs_get_tree+0x87/0x2f0 vfs_cmd_create+0xbd/0x280 __do_sys_fsconfig+0x3df/0x990 do_syscall_64+0x136/0x1540 entry_SYSCALL_64_after_hwframe+0x76/0x7e To avoid the leak, call btrfs_sysfs_remove_space_info() instead of kfree() for the elements. | ||||
| CVE-2026-6068 | 1 Nasm | 2 Nasm, Netwide Assembler | 2026-05-20 | 6.5 Medium |
| NASM contains a heap use after free vulnerability in response file (-@) processing where a dangling pointer to freed memory is stored in the global depend_file and later dereferenced, as the response-file buffer is freed before the pointer is used, allowing for data corruption or remote code execution. | ||||