| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid memory leak in f2fs_rename()
syzbot reported a f2fs bug as below:
BUG: memory leak
unreferenced object 0xffff888127f70830 (size 16):
comm "syz.0.23", pid 6144, jiffies 4294943712
hex dump (first 16 bytes):
3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9..
backtrace (crc 925f8a80):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4520 [inline]
slab_alloc_node mm/slub.c:4844 [inline]
__do_kmalloc_node mm/slub.c:5237 [inline]
__kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250
kmalloc_noprof include/linux/slab.h:954 [inline]
fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364
f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143
f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961
f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308
vfs_rename+0x7ff/0x1250 fs/namei.c:6026
filename_renameat2+0x4f4/0x660 fs/namei.c:6144
__do_sys_renameat2 fs/namei.c:6173 [inline]
__se_sys_renameat2 fs/namei.c:6168 [inline]
__x64_sys_renameat2+0x59/0x80 fs/namei.c:6168
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux
label during whiteout initialization"), we added a call to
f2fs_setup_filename() without a matching call to f2fs_free_filename(),
fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate control request size
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix dir separator in SMB1 UNIX mounts
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().
It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.
Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:
==================================================================
BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
Read of size 2 at addr ffff88810cfc46f8 by task pm/606
Call Trace:
<TASK>
dump_stack_lvl+0x4d/0x70
print_report+0x170/0x4f3
? __pfx__raw_spin_lock_irqsave+0x10/0x10
kasan_report+0xda/0x110
? __pm_runtime_resume+0xe2/0xf0
? __pm_runtime_resume+0xe2/0xf0
__pm_runtime_resume+0xe2/0xf0
ethnl_ops_begin+0x49/0x270
ethnl_set_features+0x23c/0xab0
? __pfx_ethnl_set_features+0x10/0x10
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xf/0xf0
? local_clock+0x10/0x30
? kasan_save_track+0x25/0x60
? __kasan_kmalloc+0x7f/0x90
? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
genl_family_rcv_msg_doit+0x1e7/0x2c0
? __pfx_genl_family_rcv_msg_doit+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? stack_trace_save+0x8e/0xc0
genl_rcv_msg+0x411/0x660
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_ethnl_set_features+0x10/0x10
netlink_rcv_skb+0x121/0x380
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_down_read+0x10/0x10
genl_rcv+0x23/0x30
netlink_unicast+0x60f/0x830
? __pfx_netlink_unicast+0x10/0x10
? __pfx___alloc_skb+0x10/0x10
netlink_sendmsg+0x6ea/0xbc0
? __pfx_netlink_sendmsg+0x10/0x10
? __futex_queue+0x10b/0x1f0
____sys_sendmsg+0x7a2/0x950
? copy_msghdr_from_user+0x26b/0x430
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
___sys_sendmsg+0xf8/0x180
? __pfx____sys_sendmsg+0x10/0x10
? __pfx_futex_wait+0x10/0x10
? fdget+0x2e4/0x4a0
__sys_sendmsg+0x11f/0x1c0
? __pfx___sys_sendmsg+0x10/0x10
do_syscall_64+0xe2/0x570
? exc_page_fault+0x66/0xb0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: omap: do not register driver in probe()
Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the
omap_mpuio_driver from omap_mpuio_init(), which is called from
omap_gpio_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c47 ("driver core: enforce
device_lock for driver_match_device()") leading to a potential deadlock
condition described in [1].
Additionally, the omap_mpuio_driver is never unregistered from the
driver core, even if the module is unloaded.
Hence, register the omap_mpuio_driver from the module initcall and
unregister it in module_exit(). |
| IBM Planning Analytics Advanced Certified Containers 3.1.0 through 3.1.4 could allow a local privileged user to obtain sensitive information from environment variables. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/mc: Fix error path ordering in edac_mc_alloc()
When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path
will call put_device() which will end up calling the device's release
function.
However, the init ordering is wrong such that device_initialize() happens
*after* the failed allocation and thus the device itself and the release
function pointer are not initialized yet when they're called:
MCE: In-kernel MCE decoding enabled.
------------[ cut here ]------------
kobject: '(null)': is not initialized, yet kobject_put() is being called.
WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd
CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full)
RIP: 0010:kobject_put
Call Trace:
<TASK>
edac_mc_alloc+0xbe/0xe0 [edac_core]
amd64_edac_init+0x7a4/0xff0 [amd64_edac]
? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac]
do_one_initcall
...
Reorder the calling sequence so that the device is initialized and thus the
release function pointer is properly set before it can be used.
This was found by Claude while reviewing another EDAC patch. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: thead: Fix buffer overflow and use standard endian macros
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0 |
| A storing passwords in a recoverable format vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.4, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.4, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to retrieve Service account password via server address modification in LDAP configuration. |
| The Log4j1XmlLayout from the Apache Log4j 1-to-Log4j 2 bridge fails to escape characters forbidden by the XML 1.0 standard, producing malformed XML output. Conforming XML parsers are required to reject documents containing such characters with a fatal error, which may cause downstream log processing systems to drop or fail to index affected records.
Two groups of users are affected:
* Those using Log4j1XmlLayout directly in a Log4j Core 2 configuration file.
* Those using the Log4j 1 configuration compatibility layer with org.apache.log4j.xml.XMLLayout specified as the layout class.
Users are advised to upgrade to Apache Log4j 1-to-Log4j 2 bridge version 2.25.4, which corrects this issue.
Note: The Apache Log4j 1-to-Log4j 2 bridge is deprecated and will not be present in Log4j 3. Users are encouraged to consult the Log4j 1 to Log4j 2 migration guide https://logging.apache.org/log4j/2.x/migrate-from-log4j1.html , and specifically the section on eliminating reliance on the bridge. |
| Deserialization of untrusted data in Microsoft High Performance Compute Pack (HPC) allows an authorized attacker to elevate privileges locally. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.33 and 2.17.5, the dynamic-node-parameters endpoints did not verify whether the authenticated caller was authorized to use a supplied credential reference. An authenticated user with access to a shared workflow could supply a foreign credential ID in the request body, causing the backend to decrypt and use that credential in a helper execution path where the caller also controls the destination URL. This allowed the caller to force the backend to authenticate against attacker-controlled infrastructure using a credential belonging to another user, effectively exfiltrating a reusable API key. The issue is not limited to any single node type; any node that resolves credentials dynamically through these endpoints may be affected. This issue has been patched in versions 1.123.33, 2.17.5, and 2.18.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with a valid API key scoped to variable:list could read variables from projects they are not a member of by supplying an arbitrary projectId query parameter to the public API variables endpoint. The handler queried the variables repository directly without enforcing project membership checks, bypassing the authorization-aware service layer used by the internal enterprise controller. If variables were misused to store sensitive information such as credentials or tokens, they should be rotated immediately. This issue only affects licensed enterprise or team deployments with multiple projects and the variables feature enabled. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the /chat WebSocket endpoint used by the Chat Trigger node's Hosted Chat feature did not verify that an incoming connection was authorized to interact with the target execution. An unauthenticated remote attacker who could identify a valid execution ID for a workflow in a waiting state could attach to that execution, receive the pending prompt intended for the legitimate user, and submit arbitrary input to resume or influence downstream workflow behavior. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the Oracle Database node's select operation allowed user-controlled input passed into the Limit field via expressions to be interpolated directly into the SQL query without sanitization or parameterization. In workflows where external input is passed into the Limit field (e.g., from a webhook), an attacker could inject arbitrary SQL and exfiltrate data from the connected Oracle database. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with permission to create or modify workflows containing a Python Code Node could escape the sandbox and achieve arbitrary code execution on the task runner container. This issue only affects instances where the Python Task Runner is enabled. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an unauthenticated attacker could register a malicious MCP OAuth client with a crafted client_name. If a victim user authorized the OAuth consent dialog and a second user subsequently revoked that access, a toast notification would render the injected script. Clicking the link would execute arbitrary JavaScript in the victim's authenticated n8n browser session, enabling credential and session token theft, workflow manipulation, or privilege escalation. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network. |
